Introduction
Thank you for choosing the LISEN Qi2.2 25W TEC Cooling MagSafe Car Mount Charger. This device is designed to provide secure magnetic mounting and efficient wireless charging for your iPhone 12-17 series, while actively managing heat to protect your device's battery and performance during use. This manual provides essential information for proper setup, operation, and maintenance of your new car charger.
Package Contents
Please verify that all items are present in your package:
- 1x Qi2.2 25W Semiconductor Cooling Wireless Charger
- 1x 54W Car Charger (Cigarette Lighter Adapter)
- 1x Fast Charging USB-C Cable
- 1x Air Vent Hook Mount
- 1x Adhesive Dashboard Car Mount
Image: All components included in the LISEN Qi2.2 25W TEC Cooling MagSafe Car Mount Charger package.
Safety Information
Please read and follow these safety guidelines to prevent injury or damage to your device:
- Do not expose the device to extreme temperatures, direct sunlight for prolonged periods, or moisture.
- Ensure the car charger is securely plugged into the vehicle's power outlet.
- Do not attempt to disassemble or modify the charger.
- Keep out of reach of children.
- Ensure proper ventilation around the device during operation.
- Avoid placing the charger in a position that obstructs your view or interferes with driving controls.
Setup
Your LISEN car mount charger offers two primary mounting options: an air vent mount and an adhesive dashboard mount.
1. Choosing a Mounting Location
Select a location in your vehicle that provides a clear view of your phone without obstructing your driving view or access to vehicle controls. Consider the length of the charging cable for optimal placement.
Image: Flexible mounting options for the LISEN car charger.
2. Air Vent Mount Installation
- Attach the air vent hook mount to the back of the wireless charger unit.
- Locate a suitable air vent in your vehicle.
- Securely hook the mount onto one of the vent blades and tighten the locking mechanism to ensure stability.
3. Dashboard Mount Installation
- Attach the adhesive dashboard mount to the back of the wireless charger unit.
- Clean the desired dashboard surface thoroughly with an alcohol wipe and let it dry completely.
- Remove the protective film from the adhesive pad.
- Press the mount firmly onto the dashboard for at least 30 seconds. Allow 24 hours for the adhesive to fully cure before attaching your phone.
4. Power Connection
- Insert the provided 54W car charger into your vehicle's cigarette lighter socket.
- Connect one end of the fast charging USB-C cable to the car charger and the other end to the USB-C port on the wireless car mount.
- The cooling fan will activate, and an indicator light on the charger will illuminate, confirming power is supplied.
Video: Official LISEN demonstration of the Qi2 MagSafe Car Charger Mount, showing installation and basic use.
Operating Instructions
1. Attaching Your iPhone
Ensure your iPhone (12-17 series) is MagSafe compatible. If using a case, it must be a MagSafe-compatible case. Simply bring your iPhone close to the magnetic charging surface of the mount. The strong N55 magnets will automatically align and secure your phone in the optimal charging position.
Image: Secure magnetic attachment of an iPhone to the LISEN charger.
2. Wireless Charging
Once your iPhone is securely attached, wireless charging will begin automatically. The cooling function will also activate to maintain optimal charging temperatures.
3. Adjusting Viewing Angle
The mount features a 360-degree rotatable ball joint, allowing you to adjust your phone to the desired portrait or landscape viewing angle for navigation or calls.
Cooling Technology
The LISEN Qi2.2 25W TEC Cooling MagSafe Car Mount Charger incorporates advanced TEC (Thermoelectric Cooler) semiconductor cooling technology to prevent your iPhone from overheating during charging, especially when using power-intensive applications like navigation.
- Temperature Management: The TEC cooling core and integrated turbo air fan work together to dissipate heat, maintaining an average device temperature of 77°F (25°C), significantly cooler than standard wireless chargers.
- Instant Cooling: The system can drop the device temperature by approximately 17°F (9.4°C) instantly upon activation.
- Battery Protection: By preventing overheating, the cooling technology helps preserve your iPhone's battery health and prevents performance throttling.
Image: Comparison of LISEN cooling performance versus standard chargers.
Image: Internal components of the LISEN cooling system.
Charging Compatibility
This charger is specifically designed for Apple iPhone models with MagSafe technology.
- Compatible Models: iPhone 12 series, iPhone 13 series, iPhone 14 series, iPhone 15 series, iPhone 16 series, iPhone 17 series.
- Charging Speeds:
- iPhone 16-17 models (with iOS 26 or later): Up to 25W
- iPhone 12-15 models: Up to 15W
- All iPhone e-series models: Up to 7.5W
- Note: Not compatible with Android phones or iPhones without MagSafe capability. Non-magnetic cases are not supported for optimal magnetic attachment and charging.
Image: iPhone compatibility and case requirements for the LISEN charger.
Maintenance
To ensure the longevity and optimal performance of your LISEN car mount charger, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to wipe the surface of the charger. Do not use harsh chemicals or abrasive cleaners.
- Cable Care: Avoid bending or crimping the USB-C cable excessively, especially near the connectors, to prevent damage.
- Ventilation: Ensure the cooling fan and vents on the charger are free from dust and debris to maintain efficient heat dissipation.
- Storage: When not in use for extended periods, store the charger in a cool, dry place away from direct sunlight.
Troubleshooting
If you encounter issues with your LISEN car mount charger, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Phone not charging | 1. Loose cable connection 2. Non-MagSafe phone/case 3. Insufficient power from car outlet 4. Foreign object between phone and charger | 1. Ensure USB-C cable and car charger are securely connected. 2. Verify your iPhone is MagSafe compatible or using a MagSafe case. 3. Check if the car charger is properly inserted into the cigarette lighter. 4. Remove any objects (e.g., credit cards, metal plates) from between the phone and charger. |
| Weak magnetic hold | 1. Non-MagSafe case 2. Thick phone case 3. Charger not securely mounted | 1. Use a MagSafe-compatible case or no case. 2. Ensure the case is not excessively thick. 3. Re-secure the air vent or dashboard mount. |
| Cooling fan not operating | 1. No power to charger 2. Obstructed fan/vents | 1. Check power connections as described in Setup. 2. Clear any dust or debris from the fan and vents. |
| Slow charging | 1. Phone model not supporting higher wattage 2. Using a non-LISEN car charger/cable | 1. Refer to the 'Charging Compatibility' section for expected speeds. 2. Use the provided LISEN 54W car charger and fast charging USB-C cable. |
Specifications
| Feature | Detail |
|---|---|
| Brand | LISEN |
| Model Name | 2026 Qi2.2 25W TEC Magsafe Car Mount Charger |
| Model Number | 2E7190 |
| Color | Black |
| Compatible Devices | iPhone 12-17 Series (MagSafe compatible) |
| Mounting Type | Vent, Dashboard |
| Wireless Charging Output | Up to 25W (Qi2.2) |
| Cooling Technology | TEC (Thermoelectric Cooler) Semiconductor Cooling Core, Cooling Fan |
| Magnets | N55 Strong Magnets |
| Car Charger Output | 54W (Included) |
| Material | Metal, Plastic |
| Item Dimensions | 3.5 x 2.4 x 2.4 inches |
Warranty and Support
Your LISEN Qi2.2 25W TEC Cooling MagSafe Car Mount Charger is covered by a 2-year warranty. LISEN also provides lifetime customer support and personalized assistance for any inquiries or issues you may encounter.
For warranty claims or technical support, please contact LISEN customer service through the retailer where you purchased the product or visit the official LISEN website for contact information.