DaVinci Colby Grow 6-in-1 Convertible Crib Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, maintenance, and safety of your DaVinci Colby Grow 6-in-1 Convertible Crib. Designed to adapt to your child's growth, this crib transitions through six stages: portable bassinet, full-size crib, full-size crib with wheels, toddler bed, junior bed, and full-size bed. Please read all instructions carefully before assembly and use to ensure safe operation.

2. Safety Information

Your child's safety is paramount. The DaVinci Colby Grow 6-in-1 Convertible Crib is GREENGUARD Gold Certified, meaning it has been rigorously tested for over 10,000 chemical emissions and VOCs, contributing to cleaner indoor air. It exceeds ASTM and CPSC safety standards and features a non-toxic, lead- and phthalate-safe finish.

• Always follow assembly instructions precisely.
• Ensure all hardware is securely tightened before use and periodically check for looseness.
• Do not use the crib if any parts are missing, damaged, or broken. Contact customer support for replacement parts.
• Never place the crib near windows where cords or blinds could pose a strangulation hazard.
• Do not use a mattress that is too thick or too thin for the crib. The mattress must fit snugly to prevent gaps.
• Keep small objects away from the crib to prevent choking hazards.
• Always use the lowest mattress position once your child can sit up or pull themselves to a standing position.

3. Package Contents

Before beginning assembly, verify that all components are present. The package includes:

• Crib frame components
• 1-inch bassinet pad
• All necessary assembly hardware
• Removable locking wheels
• Assembly Instruction Manual

Note: Full-size mattresses and bed conversion kits (#M5789, #M26058B) are sold separately.

4. Assembly Instructions

Assembly is designed to be straightforward. Please refer to the included "Assembly Instruction" booklet for detailed, step-by-step visual guides specific to your model. Ensure you have adequate space and the necessary tools (usually a Phillips head screwdriver and Allen wrench, often included).

General Assembly Steps:

1. Unpack all components and lay them out on a soft, clean surface to prevent scratches.
2. Identify all parts and hardware using the provided parts list in the separate instruction booklet.
3. Attach the side panels to the end panels using the specified hardware.
4. Install the mattress support frame at the desired height.
5. Securely tighten all bolts and screws. Do not overtighten.
6. For bassinet mode, attach the removable locking wheels. Ensure they are locked when stationary.

Image: The DaVinci Colby Grow 6-in-1 Convertible Crib in its full-size crib configuration, showcasing the Washed Natural finish.

5. Operating the Convertible Crib

The Colby Grow crib offers six configurations to accommodate your child's development.

5.1. Conversion Stages

• Portable Bassinet (Newborn - 3 months): Ideal for newborns, this compact setup includes a 1-inch bassinet pad and removable wheels for easy movement.
• Full-Size Crib (Newborn - 3 years): The standard crib configuration provides a secure sleeping environment.
• Full-Size Crib with Wheels (Newborn - 3 years): Similar to the full-size crib, but with added mobility for repositioning within a room.
• Toddler Bed (1.5 - 3 years): Converts by removing one side rail and adding a toddler guard rail (sold separately).
• Junior Bed (3 - 5 years): A transitional bed, typically with both side rails removed, but retaining the crib's headboard and footboard.
• Full-Size Bed (5 years - Teen): Requires a separate full-size bed conversion kit (sold separately) to transform into a standard adult bed.

Image: Visual representation of the six conversion stages: bassinet, full-size crib, full-size crib with wheels, toddler bed, junior bed, and full-size bed.

5.2. Adjustable Mattress Heights

The crib features 4 adjustable mattress height positions. Adjust the mattress support to the appropriate level based on your child's developmental stage:

• Highest Position: For newborns, making it easier to reach your baby.
• Mid-High Position: When your baby can roll over.
• Mid-Low Position: When your baby can sit up unassisted.
• Lowest Position: When your baby can pull themselves to a standing position. This is the safest position to prevent climbing out.

Image: Diagram showing the crib with indicators for adjusting mattress height as the baby grows from newborn to standing.

5.3. Removable Locking Wheels

The included wheels can be attached for easy portability, especially useful in bassinet mode. Ensure the wheels are locked when the crib is stationary to prevent accidental movement.

Image: The portable bassinet configuration of the crib, highlighting its compact size and the removable locking wheels.

6. Maintenance and Care

To maintain the quality and longevity of your crib, follow these care instructions:

• Cleaning: Wipe surfaces with a damp cloth. Avoid abrasive cleaners or strong chemicals, which can damage the finish.
• Inspections: Periodically check all screws, bolts, and other hardware to ensure they are tight and secure. Retighten as necessary.
• Storage: If disassembling for storage, keep all hardware in a secure bag and store components in a dry, temperate environment.

7. Troubleshooting

If you encounter any issues during assembly or use, please review the following common points:

• Loose Parts: If any parts feel loose, re-check the assembly instructions and tighten all hardware. Do not overtighten.
• Missing Hardware: If you find any hardware missing, do not attempt to substitute with other parts. Contact customer support for replacements.
• Uneven Crib: Ensure the crib is placed on a flat, level surface. Check that all legs are properly installed and that the wheels (if attached) are functioning correctly.

For further assistance, please contact DaVinci customer support.

8. Specifications

9. Warranty and Support

For warranty information, please refer to the documentation included with your purchase or visit the official DaVinci website. For customer support, replacement parts, or any inquiries, please contact Carter's by DaVinci directly.

Manufacturer: Carter's by DaVinci

Website: www.davincibaby.com

Contact: Refer to the manufacturer's website for current contact information.