Minifire MFG24F4L 24-inch Gaming Monitor User Manual

1. Introduction

Thank you for choosing the Minifire MFG24F4L 24-inch Gaming Monitor. This manual provides essential information for setting up, operating, and maintaining your monitor. Please read it thoroughly before use to ensure optimal performance and safety.

Image 1.1: Minifire MFG24F4L 24-inch Gaming Monitor. This image displays the front view of the monitor, highlighting its frameless design and the Minifire logo.

2. Safety Information

• Always place the monitor on a stable, flat surface to prevent accidental falls.
• Ensure proper ventilation around the monitor. Do not block ventilation openings.
• Use only the power adapter and cables provided by Minifire.
• Avoid exposing the monitor to extreme temperatures, humidity, or direct sunlight.
• Do not attempt to open or repair the monitor yourself. Refer all servicing to qualified personnel.
• Keep liquids away from the monitor to prevent electrical shock or damage.

3. Package Contents

Verify that all items listed below are present in your package. If any items are missing or damaged, please contact customer support.

• Minifire MFG24F4L Gaming Monitor
• Monitor Stand (Base and Neck)
• Power Adapter
• Power Cable
• HDMI Cable
• User Manual (this document)

Image 3.1: Package contents and monitor dimensions. This image illustrates the included accessories such as the power cord, warranty card, DP cable (note: HDMI cable is listed as included in product features), and quick installation guide, alongside the monitor's physical dimensions.

4. Setup

4.1. Stand Assembly

1. Carefully remove the monitor and stand components from the packaging.
2. Attach the stand neck to the monitor panel. Ensure it clicks securely into place.
3. Attach the stand base to the stand neck. Tighten any screws if necessary.
4. Place the assembled monitor on a stable, flat surface.

The monitor also supports VESA mounting (75 x 75 mm) for alternative mounting solutions. The stand allows for a tilt adjustment of -5° to 15°.

Image 4.1: Stand assembly steps and VESA compatibility. This image visually guides the user through attaching the monitor stand and highlights VESA 75x75mm support and tilt adjustment.

4.2. Connecting to a Device

1. Connect the power adapter to the monitor's power input and then plug the power cable into a wall outlet.
2. Connect your computer or gaming console to the monitor using either the HDMI cable (included) or a DisplayPort cable (not included).
• For up to 120Hz refresh rate, use the HDMI 1.4 port.
• For up to 180Hz refresh rate, use the DisplayPort 1.2 port.
3. If desired, connect headphones or external speakers to the monitor's audio output port. Note: This monitor does not have built-in speakers.

Image 4.2: Monitor port layout and joystick control. This image details the location of the HDMI 1.4, DisplayPort 1.2, audio output, and power input ports, along with the multi-directional joystick for OSD control.

5. Operating the Monitor

5.1. Power On/Off

Press the joystick button (located on the back of the monitor, as shown in Image 4.2) to power on or off the monitor. A short press will typically bring up the OSD menu, while a long press will toggle power.

5.2. On-Screen Display (OSD) Controls

The monitor features a single joystick control for navigating the On-Screen Display (OSD) menu. This joystick allows you to adjust various settings.

• Up/Brightness: Move the joystick up to increase brightness or navigate up in menus.
• Menu/Confirm: Press the joystick in to open the OSD menu or confirm a selection.
• Decrease/Return/Exit/Input Source: Move the joystick left to decrease values, return to the previous menu, exit the OSD, or select input source.
• Down/Volume: Move the joystick down to decrease volume (if external speakers are connected) or navigate down in menus.
• Increase/Contrast: Move the joystick right to increase contrast or navigate right in menus.

5.3. Display Settings and Features

Access the OSD menu to configure the following display settings:

• Refresh Rate: The monitor supports up to 180Hz refresh rate via DisplayPort 1.2 and up to 120Hz via HDMI 1.4. Ensure your graphics card settings are configured to utilize the desired refresh rate.
• Response Time (MPRT): Experience smooth motion with a 1ms Moving Picture Response Time (MPRT).


Image 5.1: MPRT response time illustration. This image compares visual clarity at 60Hz (14ms) versus 180Hz (1ms MPRT), demonstrating the reduction in motion blur.

• AMD FreeSync: This technology synchronizes the monitor's refresh rate with your AMD graphics card's frame rate, eliminating screen tearing and stuttering for a smoother gaming experience. Enable FreeSync in the OSD menu and your graphics card control panel.


Image 5.2: FreeSync comparison. This image visually contrasts the effects of FreeSync being on versus off, showing the elimination of ghosting and tearing artifacts when FreeSync is active.

• Color Settings: The monitor offers sRGB 110% and DCI-P3 80% color gamut coverage, 8-bit color depth, and HDR support for vibrant and accurate colors. Adjust color temperature, gamma, and other settings via the OSD.
• Brightness and Contrast: The display provides 300 Nits of brightness and a 4000:1 contrast ratio. Adjust these to your preference.
• Flicker-Free Technology: Reduces screen flickering to minimize eye strain during extended use.
• Low Blue Light Mode: Decreases blue light emissions to help reduce eye fatigue, especially during nighttime use.


Image 5.3: Display features. This image highlights key display attributes including 300 Nits brightness, Flicker-Free technology, and Low Blue Light mode, designed for user comfort.

5.4. Gaming Features

The monitor includes specific features to enhance your gaming experience:

• Game Assist: This feature provides tools like a customizable crosshair overlay and black leveling to improve visibility in dark game scenes.

Image 5.4: Game Assist features. This image demonstrates the in-game crosshair overlay and the effect of black leveling to enhance visibility in dark areas.

6. Maintenance

6.1. Cleaning the Monitor

• Always power off the monitor and unplug the power cable before cleaning.
• Use a soft, lint-free cloth slightly dampened with water to clean the screen. Avoid using alcohol-based cleaners, solvents, or abrasive materials.
• For the monitor casing, use a soft, dry cloth.

6.2. Storage

If storing the monitor for an extended period, disconnect all cables, pack it in its original packaging (if available), and store it in a cool, dry place away from direct sunlight and extreme temperatures.

7. Troubleshooting

If you encounter issues with your monitor, refer to the following troubleshooting guide:

• No Power:
  • Ensure the power cable is securely connected to the monitor and the power outlet.
  • Verify the power outlet is functioning correctly.
  • Check if the power adapter is properly connected.
• No Signal:
  • Confirm that the video cable (HDMI or DisplayPort) is securely connected to both the monitor and your computer/device.
  • Ensure your computer/device is powered on and outputting a video signal.
  • Use the OSD menu to manually select the correct input source (HDMI or DP).
  • Try a different video cable or port if available.
• Image Flickering or Distorted:
  • Check the video cable for damage or loose connections.
  • Adjust the refresh rate in your computer's display settings.
  • Disable AMD FreeSync temporarily to see if the issue persists.
  • Ensure your graphics card drivers are up to date.
• OSD Not Responding:
  • Power cycle the monitor (turn off, unplug, wait 30 seconds, plug back in, turn on).

If the problem persists after trying these steps, please contact Minifire customer support.

8. Specifications

9. Warranty and Support

Minifire provides a professional after-sales guarantee for this product. For any issues, technical support, or warranty claims, please contact the Minifire customer service team. Refer to your purchase documentation or the Minifire official website for contact information.