Introduction
The Hatchimals Alive Neon Rainbow Bestie Pool Party set provides an interactive hatching experience where two Hatchimals figures emerge from color-reveal eggs in water. This set includes a heart-shaped pool and various accessories for imaginative play. Follow these instructions for proper setup, operation, and care of your new toy.
What's Included
Verify that all components are present before beginning. The package contains:
- 2 Hatchimals CollEGGtibles in Eggs
- 1 Heart-shaped Pool
- 12 Accessories (e.g., flamingo floatie, beach ball, sunglasses, hats, water bottles, camera)
- 2 Pairs of Wings
- 3 Chip Art Photos
- 1 Checklist/Collector Map
- 1 Instruction Sheet
Image: The complete Hatchimals Alive Neon Rainbow Bestie Pool Party set in its original packaging.
Setup
- Prepare Play Area: Choose a flat, easy-to-clean surface for play. It is recommended to protect the play area from potential water spills.
- Position the Pool: Place the heart-shaped pool on the prepared surface.
- Place Eggs: Carefully place the two Hatchimals eggs into the designated slots within the pool. Ensure the eggs are upright and the small holes are facing forward.
- Remove Wings: Gently remove the small wings attached to the eggs before adding water.
Image: Two children preparing the heart-shaped pool and placing the Hatchimals eggs for hatching.
Operating Instructions: Hatching
Follow these steps to hatch your Hatchimals figures:
- First Water Fill: Slowly add warm water to the heart-shaped pool until it reaches the first indicated water line. Observe as the water in each half of the heart begins to change color (blue and pink).
- Wait for Color Change: Allow a short period for the initial color change to occur and for the eggs to begin cracking.
- Second Water Fill & Hatching: Continue to slowly add more warm water to the pool until it reaches the top. As the water level rises, the blue and pink colors will blend to form purple, and your Hatchimals figures will fully emerge from their eggs.
Image: A visual sequence demonstrating adding water, the initial color change, and the final purple color as Hatchimals hatch.
Video: A detailed 'How-To' guide for the Hatchimals Alive Bestie Pool Party, demonstrating the hatching process.
Operating Instructions: Playtime
Once hatched, your Puppadees are ready for fun!
- Attach Wings: Snap the provided wings onto the back of each Hatchimals figure.
- Use Accessories: Dress your figures with the sunglasses and hats. Place them on the flamingo floatie or with the beach ball in the pool.
- Stack & Pose: The Puppadees can be stacked on top of each other for various poses.
- BFF Towels: The two fabric towels can be joined together to form a heart shape, creating a play mat for your figures.
Image: Two Hatchimals figures, one on a flamingo floatie, enjoying the heart-shaped pool.
Image: Hatchimals figures adorned with accessories like hats and sunglasses, resting on their fabric towels.
Video: A short video showcasing the Hatchimals Alive Neon Rainbow Bestie Pool Party set in action, highlighting the figures and play features.
Maintenance
Proper care ensures longevity of your toy:
- Drying: After each play session involving water, thoroughly empty the pool and dry all components, including the figures and accessories, to prevent mold or mildew.
- Cleaning: Wipe down the pool and figures with a damp cloth as needed. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store all parts in a clean, dry place away from direct sunlight when not in use.
Troubleshooting
| Issue | Solution |
|---|---|
| Eggs not hatching | Ensure warm water is used. Cold water may slow or prevent the hatching process. Verify eggs are fully submerged. |
| Water color not changing | Confirm warm water is used. The color-changing dye is activated by temperature. Ensure sufficient water is added to mix the colors. |
| Accessories do not fit | Ensure accessories are correctly oriented and gently pressed into place. Avoid excessive force. |
Specifications
- Brand Name: Hatchimals
- Model Number: 6072786
- UPC: 681147063952
- Material Type: Plastic
- Age Range Description: 3+ years
- Item Dimensions: 0.87 x 0.67 x 0.75 inches (figures, approximate)
- Number of Pieces: 1 (set)
- Assembly Required: No
- Manufacturer: Spin Master
Safety Information
WARNING: CHOKING HAZARD – Small parts. Not for children under 3 years. Adult supervision is recommended during play, especially when using water.
Warranty and Support
This product comes with no manufacturer warranty. For product inquiries or additional support, please visit the official Hatchimals Store on Amazon: Hatchimals Store.