Introduction
This manual provides detailed instructions for setting up, operating, and maintaining your VGBUS M15-64G Wireless Retro Game Console. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.
Package Contents
Verify that all items listed below are included in your package:
- 1 x M15 Game Stick Console
- 2 x Wireless Gamepads
- 1 x Memory Card (64GB pre-installed)
- 1 x HDMI Extension Cable
- 1 x USB Receiver for Gamepads
- 1 x Power Cord (USB)
Image: Contents of the VGBUS M15-64G Wireless Retro Game Console package.
Setup Instructions
Follow these steps to set up your VGBUS M15-64G console:
- Connect the Game Stick: Plug the M15 game stick directly into an available HDMI port on your television or monitor. If space is limited, use the provided HDMI extension cable.
- Connect Power: Connect the power cord to the game stick's power input and then to a USB power source (e.g., TV USB port, USB wall adapter).
- Insert USB Receiver: Insert the 2.4GHz USB receiver into an available USB port on the game stick.
- Prepare Gamepads: Open the battery compartment on each wireless gamepad and insert 2 AAA batteries (not included), ensuring correct polarity. Close the compartment.
- Select Input Source: Turn on your television or monitor and use its remote control to select the correct HDMI input source to which the game stick is connected.
Image: The M15 console connected to a display, ready for gameplay with wireless controllers.
Operating Instructions
Powering On and Initial Screen
Once connected and the correct HDMI input is selected, the console will power on automatically and display the main menu. The gamepads should automatically connect to the console via the USB receiver.
Navigating the Menu
Use the D-pad or left analog stick on your gamepad to navigate through the menu options. The 'A' button typically confirms selections, and the 'B' button typically goes back.
- Search: Locate specific games by name.
- Favorites: Access games you have marked as favorites.
- Record: Some systems may offer game recording features.
- Save: Access save states or game saving options.
Image: Main menu interface of the M15 console, displaying game categories and system functions.
Playing Games
The console comes with over 20,000 built-in games across 20 pre-installed emulators. Select a game from the menu to start playing.
Controller Functions
The wireless gamepads feature a standard layout for retro gaming. Familiarize yourself with the buttons:
- D-pad: Directional control.
- Analog Sticks: Additional directional control for compatible games.
- Action Buttons (A, B, X, Y): Game-specific actions.
- Start/Select: Pause, menu access, or other game functions.
- Shoulder Buttons (L1, R1, L2, R2): Additional game-specific actions.
- HOME Button: Returns to the main console menu.
Image: Detailed view of the M15 wireless gamepad, showcasing its design and button layout.
Saving and Loading Game Progress
Many emulators support save states, allowing you to save your progress at any point in a game. Refer to the in-game or emulator-specific menus for saving and loading options.
Exiting a Game
To exit a game and return to the main console menu, press the 'HOME' button on the gamepad.
Maintenance
Cleaning
- Use a soft, dry cloth to clean the console and gamepads.
- Do not use liquid cleaners or abrasive materials, as they may damage the device.
Storage
- Store the console and accessories in a cool, dry place away from direct sunlight and extreme temperatures.
- If storing for an extended period, remove batteries from the gamepads to prevent leakage.
Memory Card Handling
- The console uses a memory card for game storage. Handle it with care.
- Do not remove the memory card while the console is powered on or during gameplay to prevent data corruption.
- The console supports external TF card expansion up to 128GB.
Troubleshooting
- No Power/Console Not Turning On:
Ensure the power cord is securely connected to the game stick and the USB power source. Try a different USB port or power adapter. - No Signal on TV:
Verify that the game stick is fully inserted into the HDMI port. Ensure your TV is set to the correct HDMI input source. Try a different HDMI port or the HDMI extension cable. - Gamepads Not Responding:
Check if the USB receiver is properly inserted into the game stick. Ensure the gamepads have fresh AAA batteries and are powered on. Re-pair the controllers if necessary (refer to console settings if available). - Game Freezing or Crashing:
Try restarting the game or the console. Ensure the memory card is properly inserted. If the issue persists, it may be a specific game or emulator issue. - Games Not Saving:
Confirm that the memory card has sufficient free space. Ensure you are following the correct save procedure for the specific game or emulator.
Specifications
- Model: M15
- Brand: VGBUS
- Product Dimensions: 9 x 2.8 x 7 inches
- Item Weight: 1.04 pounds
- Input Device: Wireless Gamepad
- Output Mode: HDMI Output
- Resolution Support: Up to 4K
- External Storage: Supports TF card up to 128 GB
- Pre-installed Games: 20,000+
- Emulators: 20 pre-installed emulators
Image: Technical specifications and dimensions of the M15 game stick.
Warranty Information
Specific warranty details are not provided in this manual. Please refer to the product packaging, the seller's website, or contact the manufacturer directly for warranty terms and conditions.
Customer Support
For technical assistance, troubleshooting, or any questions regarding your VGBUS M15-64G Wireless Retro Game Console, please contact the seller or manufacturer through their official support channels.
