BEZGAR TX126 Remote Control Boat User Manual

1. Introduction

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your BEZGAR TX126 Remote Control Boat. Please read this manual thoroughly before first use and retain it for future reference.

2. Package Contents

Upon unboxing, verify that all the following components are included:

• BEZGAR TX126 RC Boat
• 2.4 GHz Transmitter (Remote Control)
• 7.4V 700 mAh Li-ion Battery (for boat)
• USB Charging Cable
• Wrench
• Propeller (1 extra)
• Display Stand
• Nut
• Instruction Manual
• AA Batteries (for remote)

Image: Contents of the BEZGAR TX126 RC Boat package, including the boat, remote, batteries, charger, and accessories.

3. Setup

3.1. Remote Control Battery Installation

1. Locate the battery compartment on the back of the remote control.
2. Use a small screwdriver to open the battery cover.
3. Insert the provided AA batteries, ensuring correct polarity (+/-).
4. Replace the battery cover and secure it with the screw.

3.2. Boat Battery Installation and Charging

1. Twist the latch on the boat's top cover to unlock it and remove the cover.
2. Connect the boat's 7.4V 700mAh Li-ion battery to the boat's power connector.
3. Secure the battery within the boat using the internal Velcro strap.
4. Carefully replace the top cover, ensuring the rubber seal is properly seated, and twist the latch to lock it.
5. To charge the boat battery, disconnect it from the boat and connect it to the USB charging cable. Plug the USB cable into any standard USB power source. The charging time is approximately 50 minutes for 15 minutes of fun time.

Image: Illustration of the 700mAh battery, showing charging time of 50 minutes and play time of 15 minutes.

3.3. Attaching the Protective Nose Cone

For use in pools or confined spaces, attach the white protective nose cone to the front of the boat to prevent damage from collisions.

3.4. Display Stand Assembly

Assemble the two black plastic pieces to form the display stand. This stand can be used to store the boat when not in use or for drying after operation.

4. Operating Instructions

4.1. Powering On and Pairing

1. Ensure the boat's battery is connected and the cover is securely latched.
2. Place the boat in water. The boat is equipped with a water-sensor activation system and will only power on when in contact with water.
3. Turn on the remote control using the power switch. The remote and boat will automatically pair.

4.2. Controls and Features

• Direction Control Wheel: Controls left and right steering.
• Throttle Trigger: Pull to accelerate forward, push to reverse.
• Speed Switch: Adjusts the boat's speed (up to 25 KPH).
• LED Lights Button: Activates the boat's LED lights for enhanced visibility.
• Steering Trim: Fine-tunes steering to ensure the boat travels straight.
• Demo Mode: Single click for automatic flip, double click for automatic demonstration.
• 2.4 GHz Radio System: Allows multiple boats to operate simultaneously without interference.
• One-Click Flip: If the boat capsizes, press the flip button on the remote to right it.
• Water Cooling System: Helps maintain optimal motor temperature during operation.
• Low-Battery Warning: The remote control provides a warning when the boat's battery is low, ensuring you have time to retrieve it. The boat has a 400 ft long-distance warning feature.

Image: The BEZGAR TX126 RC Boat demonstrating its dual-speed mode, highlighting its ability to reach a maximum speed of 25 km/h.

Image: Diagram illustrating the one-click flip feature, showing the boat righting itself after capsizing.

Image: Visual representation of the 2.4 GHz radio system, enabling multiple users to operate RC boats simultaneously without interference, and showcasing an 8-shape mode for maneuvering.

4.3. Official Product Video

Video: An overview of the BEZGAR HJ820 RC Boat, demonstrating its features and operation in water. This video is provided by the seller, ChengfengTechnology.

5. Maintenance

Proper maintenance ensures the longevity and optimal performance of your RC boat.

• After each use, especially in saltwater, rinse the boat with fresh water and thoroughly dry all components.
• Always disconnect and remove the boat's battery when not in use to prevent discharge and potential damage.
• Periodically apply the provided grease to the propeller shaft to ensure smooth operation and prevent corrosion.
• Inspect the propeller for any damage or debris and replace it with the extra propeller if necessary.

6. Troubleshooting

• Boat Not Responding: Ensure the boat is placed in water for activation. Check that both the boat and remote control batteries are charged and correctly installed. Verify that the remote control is powered on and paired with the boat.
• Low Battery Warning: If the remote control indicates a low battery, retrieve the boat immediately and recharge its battery.
• Boat Capsized: Use the one-click flip feature on the remote control to right the boat.

7. Specifications

Image: The BEZGAR TX126 RC Boat with its dimensions clearly marked: 12.01 inches length, 3.15 inches width, and 2.52 inches height.

Image: An overview of the BEZGAR TX126 RC Boat's key features, including speed, water-sensor, 2.4GHz radio system, LED lighting, self-righting hull, and 400ft range.

8. Safety Guidelines

• Always operate the boat in open water areas, away from swimmers, animals, and other watercraft.
• Avoid operating in strong currents or windy conditions.
• Do not touch the propeller when the boat is powered on or in water.
• Supervise children during operation.
• Ensure all hatches and covers are securely closed before placing the boat in water to prevent water ingress.

9. Warranty and Support

For warranty information, technical support, or replacement parts, please contact BEZGAR customer service through their official channels. Keep your purchase receipt as proof of purchase.