Important Safety Information
This section outlines critical safety precautions for operating the Evmore 24V 4WD Kids Ride-On UTV Truck. Adherence to these guidelines is essential to prevent injury and ensure safe operation.
- Always supervise children during operation.
- Ensure safety belts are securely fastened for all occupants.
- Do not operate near roads, motor vehicles, steep inclines, or swimming pools.
- Recommended age: 3-8 years.
- Maximum weight capacity: 110 lbs.
- Only one child aged 3-8 or two toddlers should ride at a time.
- Protective equipment (helmet) should be worn.
- Do not wash the vehicle with water; clean with a dry cloth.
- Do not ride in the rain or wet conditions.
- Not to be used in traffic.
What's in the Box
The package for your Evmore UTV includes the following components:
- Kids Ride on Car Chassis
- Remote Control
- Wheels (4x)
- Steering Wheel
- Seats (2x)
- Axles and Fasteners
- Charger
- Assembly Tools (e.g., wrench, screwdriver)
Assembly Instructions
Follow these steps to assemble your Evmore 24V 4WD Kids Ride-On UTV Truck. Refer to the assembly video for visual guidance.
Step-by-Step Assembly Guide
This video provides a detailed visual guide for assembling the Evmore 24V Kids Ride-On UTV. It covers attaching the wheels, connecting the steering mechanism, and securing the seats.
- Prepare the Chassis: Carefully unbox the main chassis and place it upside down on a soft, clean surface to prevent scratches.
- Install Rear Axle and Wheels: Insert the rear axle through the designated openings. Attach the rear wheels, ensuring the drive motors are correctly aligned, and secure them with the provided fasteners.
- Install Front Axle and Wheels: Insert the front axle and attach the front wheels, securing them with the provided fasteners.
- Connect Steering Rod: Connect the steering rod to the steering wheel column. Ensure a secure connection for proper steering function.
- Install Steering Wheel: Place the steering wheel onto the column and secure it firmly.
- Connect Battery: Locate the battery compartment (usually under the hood or seat) and connect the battery terminals (red to red, black to black).
- Install Seats: Place the seats into their designated slots and secure them with screws or clips as instructed.
- Install Roll Bar/Handle: Attach the roll bar or handle to the chassis, ensuring it is securely fastened.
- Final Checks: Verify all screws are tightened, connections are secure, and all components are properly installed before first use.
Charging Instructions
To ensure optimal battery life and performance, follow these charging procedures:
- Locate Charging Port: The charging port is located under the seat.
- Connect Charger: Plug the charger into the charging port, then into a standard wall outlet.
- Charging Time: Allow 8-12 hours for a full charge. Do not overcharge for more than 18 hours.
- Battery Indicator: The dashboard features LED lights indicating the battery level.
- Initial Charge: For the first use, charge the battery for a full 12 hours.
Power Supply Wiring Overview
This short video demonstrates the correct connection of the power supply wiring for the 4WD Kids Ride-On Car, a crucial step during assembly.
Operating Instructions
The Evmore UTV offers two primary driving modes: manual operation by the child and parental remote control.
Manual Driving Mode
- Power On: Press the red power button on the dashboard.
- Select Speed: Use the "Fast/Slow" switch to select the desired speed.
- Forward/Reverse: Use the gear shift lever (green/red switch) to select forward or reverse.
- Accelerate: Press the foot pedal to accelerate.
- Steering: Use the steering wheel to control direction.
- Horn/Music: Press the buttons on the steering wheel for horn sounds or to control music.
Parental Remote Control Mode
The 2.4G remote control allows parents to steer and navigate the vehicle, especially for younger children or for safety.
- Pairing: Ensure the remote control is paired with the vehicle (refer to remote control manual for specific pairing instructions).
- Controls: Use the directional buttons on the remote to move the vehicle forward, backward, left, and right.
- Speed Control: The remote also allows for speed adjustment (3 speeds) and emergency stop.
- Override: The remote control can override manual child operation for safety.
Music and Lights
- Built-in Music: The dashboard features built-in music. Use the music control buttons to cycle through tracks and adjust volume.
- External Audio: Connect a USB device to the USB port to play your own music or stories.
- Lights: Press the light button on the dashboard to turn the front lights on or off.
Maintenance
Regular maintenance ensures the longevity and safe operation of your UTV.
- Cleaning: Wipe the vehicle with a dry, soft cloth. Do not use water or harsh chemicals.
- Battery Care:
- Charge the battery fully after each use.
- If storing for extended periods, charge the battery monthly.
- Do not allow the battery to fully discharge for prolonged periods.
- Tire Inspection: Regularly check tires for wear and tear.
- General Inspection: Periodically inspect all nuts, bolts, and connections to ensure they are tight and secure.
Troubleshooting
This section addresses common issues you might encounter with your Evmore UTV.
| Problem | Possible Cause | Solution |
|---|---|---|
| Vehicle does not move | Battery low/dead; Loose battery connection; Blown fuse | Charge battery; Check battery terminals; Replace fuse |
| Vehicle moves slowly | Low battery; Overload (too much weight); Operating on rough terrain | Charge battery; Reduce weight; Move to smoother surface |
| Remote control not working | Remote not paired; Dead remote batteries | Re-pair remote; Replace remote batteries |
Product Specifications
Detailed specifications for the Evmore 24V 4WD Kids Ride-On UTV Truck.
- Model Number: TR2401A
- Battery: 24V 7Ah
- Motors: Four 40W motors
- Recommended Age: 36 months - 8 years
- Maximum Weight Capacity: 110 lbs
- Product Dimensions: 31.1 x 27.95 x 46.85 inches
- Item Weight: 55.9 pounds
- Run Time: Up to 120 minutes (on full charge)
- Safety Certifications: ASTM F963
- Features: 4WD, Dual Rear Shock Absorbers, 20" Spacious 2-Seat, Remote Control, Safety Belts, Horn, Music, Lights, Lockable Doors, Soft Start.
Warranty and Support
For warranty information, customer support, or to purchase replacement parts, please contact Evmore directly. Refer to the product packaging or the official Evmore website for contact details.
This product is returnable until January 31, 2026.
Product Overview
The Evmore 24V 4WD Kids Ride-On UTV Truck is designed to provide an engaging and safe driving experience for children aged 3-8. It features robust construction and multiple functionalities for diverse play environments.
Key Features
- Powerful Performance: Equipped with a 24V 7Ah battery and four 40W motors, offering up to 120 minutes of playtime and excellent climbing stability on various terrains.
- Two Driving Modes: Allows children to drive independently using a foot pedal and steering wheel, or parents can control the vehicle with a 2.4G remote control (up to 50 meters range).
- Spacious 2-Seater Design: Features a 20-inch wide seat with a 110 lbs weight capacity, comfortably accommodating one child aged 3-8 or two toddlers with two safety belts.
- Enhanced Safety: Certified by ASTM F963, includes 4 wear-resistant tires, high chassis, shock-absorbing springs, soft start, lockable doors, and passenger armrests.
- Entertainment Features: Eye-catching front lights with multiple light beads, built-in music, and the ability to connect external devices via USB for personalized audio.
A front-side view of the Evmore 24V 4WD Kids Ride-On UTV Truck in pink, showcasing its robust design and front lights.
Two children seated comfortably in the spacious 20-inch wide Evmore UTV, highlighting its two-seater capacity and safety belts.
A visual representation of the UTV's powerful 24V 7Ah battery, indicating up to 120 minutes of continuous playtime.
An illustration demonstrating the 4-wheel drive system, highlighting the powerful motors that provide traction and performance.
This image depicts the two driving modes: independent control by the child and parental remote control, offering flexibility and safety.
The UTV navigating a beach, showcasing its dual rear shock absorbers and wear-resistant wheels designed for various terrains.
This image highlights the UTV's cool lighting and music features, including the ability to connect phones for personalized soundtracks.