Mobiclinic Night 3-in-1 Co-Sleeping Crib Instruction Manual

1. Introduction

This manual provides essential instructions for the safe assembly, operation, and maintenance of your Mobiclinic Night 3-in-1 Co-Sleeping Crib. Please read all instructions carefully before use and retain this manual for future reference.

The Mobiclinic Night crib offers three versatile modes: a traditional standalone crib, a co-sleeping crib for bedside use, and a portable unit for easy transport within your home or during travel.

Image: The Mobiclinic Night 3-in-1 Co-Sleeping Crib, showcasing its design and functionality in a typical home environment.

2. Safety Information

WARNING: Failure to follow these warnings and instructions could result in serious injury or death.

• Always ensure the crib is placed on a firm, horizontal surface.
• Do not use the crib if any parts are broken, torn, or missing. Contact Mobiclinic for replacement parts.
• Ensure all assembly fasteners are securely tightened before use. Periodically check for loose fasteners.
• The maximum recommended weight for this crib is 20 kg (approximately 44 lbs).
• When used in co-sleeping mode, ensure the crib is securely fastened to the adult bed using the provided straps. There should be no gap between the crib and the adult mattress.
• Always use the mattress provided with the crib. Do not add a second mattress, as this can create a suffocation hazard.
• Keep small parts and packaging materials away from children to prevent choking hazards.
• Do not leave children unattended in or near the crib.
• The textile parts are machine washable; however, ensure they are completely dry before reassembly.

3. Package Contents

Verify that all components are present before beginning assembly:

• Crib frame (steel alloy)
• Fabric crib body (polyester, linen)
• Breathable mattress (3 cm thick)
• Mosquito net canopy
• 4 x 360° swivel wheels with locks
• Co-sleeping fastening straps
• Storage basket
• Assembly hardware (flower-shaped screws, nuts)
• Instruction manual (this document)

Image: Overview of the crib's premium features, such as the mosquito net, fastening straps, breathable mattress, storage basket, and lockable 360° swivel wheels.

4. Assembly Instructions

Follow these steps to assemble your Mobiclinic Night Co-Sleeping Crib. It is recommended to have two adults for assembly.

4.1 Frame Assembly

1. Unpack all components and lay them out on a clean, flat surface.
2. Attach the side support bars to the main frame. Ensure they click securely into place.
3. Insert the wheels into the designated slots at the bottom of the frame legs. Ensure they are firmly seated.

4.2 Fabric Body and Mattress Installation

1. Drape the fabric crib body over the assembled frame, ensuring all edges align.
2. Secure the fabric body to the frame using the integrated fasteners or zippers.
3. Place the breathable mattress inside the crib. Ensure it fits snugly without gaps around the edges.

4.3 Height Adjustment Mechanism Assembly

The crib features an adjustable height mechanism. Refer to the image below for screw installation.

Image: Detailed view of the height adjustment mechanism and how to insert the screws. Step 1 shows placing the nut near the screw hole, and Step 2 shows screwing from the outside while holding the nut against the leg.

1. Locate the height adjustment buttons on the side legs.
2. To secure the height adjustment, position the nut near the screw hole.
3. Insert the flower-shaped screw from the exterior, holding the nut against the leg until it is firmly tightened.

4.4 Mosquito Net and Storage Basket Attachment

1. Attach the mosquito net canopy to the designated points on the crib frame.
2. Secure the storage basket to the lower part of the frame using the integrated straps or clips.

5. Operating Instructions

5.1 3-in-1 Versatility Modes

Your Mobiclinic Night crib can be used in three configurations:

• Traditional Crib: Use as a standalone crib in any room. Ensure all four wheels are locked for stability.
• Co-Sleeping Crib: Position next to the adult bed. Lower one side of the crib and secure it to the adult bed using the fastening straps. This allows your baby to sleep safely next to you.
• Portable Unit: Unlock the 360° swivel wheels to easily move the crib around your home. For travel, the crib can be disassembled and packed.

Image: The Mobiclinic Night crib demonstrating its three modes of use: a standard crib, a co-sleeper attached to a bed, and a portable crib.

5.2 Height Adjustment

The crib offers three height levels to match various adult bed heights:

• Level 1: 78 cm
• Level 2: 80.5 cm
• Level 3: 83 cm

To adjust the height, press the buttons on the side legs and raise or lower the crib to the desired position. Ensure both sides are adjusted to the same height and securely locked before placing your baby in the crib.

5.3 Co-Sleeping Mode Setup

To use the crib in co-sleeping mode:

1. Position the crib next to your adult bed.
2. Unzip and lower the side panel of the crib that faces your bed.
3. Adjust the crib height so that the mattress is level with your adult mattress.
4. Pass the provided fastening straps under your adult mattress and secure them to the crib frame. Ensure the crib is pulled tightly against your bed, leaving no gap.
5. Lock all four wheels to prevent movement.

Image: Diagram showing how to correctly attach the co-sleeping safety strap to secure the crib to an adult bed, ensuring stability and safety.

5.4 Rocking Function (if applicable)

The crib may feature a rocking function with an inclination of 5° to 15° on both sides. To activate, ensure the rocking mechanism is disengaged from the stationary position. This gentle motion can help soothe your baby.

Image: A parent gently rocking the Mobiclinic Night crib, illustrating the rocking motion feature designed to calm the baby.

5.5 Anti-Reflux Inclination (if applicable)

The crib can be set with a slight inclination to help reduce discomfort after feeding and facilitate breathing for your baby. Consult your pediatrician before using this feature.

Image: The Mobiclinic Night crib set at a slight incline, demonstrating the anti-reflux feature to aid baby's digestion and breathing.

6. Maintenance

Proper maintenance ensures the longevity and safety of your crib.

• Textile Parts: The fabric crib body and mattress cover are machine washable. Use a gentle cycle with cold water and mild detergent. Do not bleach. Air dry or tumble dry on low heat. Ironing is possible at a low temperature. Ensure all textile parts are completely dry before reassembly to prevent mold or mildew.
• Non-Textile Parts: The steel alloy frame and plastic components can be cleaned with a damp cloth and mild soap. Wipe dry immediately. Do not use abrasive cleaners or solvents.
• Wheels: Periodically check the wheels for debris and ensure they swivel freely. Clean as needed.
• Fasteners: Regularly inspect all screws, bolts, and other fasteners to ensure they are tight. Tighten if necessary.

7. Troubleshooting

If you encounter any issues with your Mobiclinic Night Co-Sleeping Crib, refer to the following common solutions:

If the problem persists, please contact Mobiclinic customer support for assistance.

8. Specifications

Image: Detailed diagram showing the various dimensions of the crib, including height, width, length, mattress size, and storage basket dimensions, along with supported weight and net weight.

9. Warranty and Support

For warranty information, replacement parts, or further assistance, please contact Mobiclinic customer support directly. Refer to the contact details provided with your purchase documentation or visit the official Mobiclinic website.

Mobiclinic has been providing quality products since 1985, ensuring reliability and customer satisfaction.