Introduction
Thank you for choosing the Wisoqu Digital Camera Wisoqun3e7fuz8b2-12. This manual provides essential information for the safe and effective use of your camera. Please read it thoroughly before operating the device and keep it for future reference.
Safety Information
- Do not expose the camera to water or moisture.
- Avoid extreme temperatures, direct sunlight, or dusty environments.
- Use only the specified battery type and charger.
- Keep out of reach of children.
- Do not attempt to disassemble or repair the camera yourself. Contact customer support for assistance.
Package Contents
Verify that all items are present in your package:
- 1 x Wisoqu Digital Camera
- 1 x NP-6L Lithium Battery
- 1 x USB Cable (Type-C)
- 1 x Hand Strap
- 1 x Cleaning Cloth
- 1 x User Manual
- 1 x Storage Bag
Product Overview
Familiarize yourself with the camera's components and controls.

Figure 1: Front view of the Wisoqu Digital Camera, showing the lens, flash, and power button.

Figure 2: Back view of the camera, featuring the 2.8-inch display screen and various control buttons for navigation and settings.

Figure 3: Side view of the camera, highlighting the Type-C USB port for charging and data transfer.
Setup
1. Battery Installation
- Locate the battery compartment cover on the bottom of the camera.
- Slide the latch to open the cover.
- Insert the NP-6L lithium battery according to the polarity indicators inside the compartment.
- Close the battery compartment cover until it clicks securely into place.
2. Memory Card Installation
The camera supports 4-256GB memory cards (not included).
- With the battery compartment open, locate the memory card slot.
- Insert the memory card with the metal contacts facing the correct direction (refer to the diagram near the slot).
- Push the card gently until it clicks into place. To remove, push it again until it springs out.

Figure 4: Bottom view of the camera with the battery and memory card compartment open, showing insertion points.
3. Charging the Battery
- Connect the camera to a power source using the provided USB Type-C cable.
- The charging indicator light will illuminate.
- Charging is complete when the indicator light turns off or changes color (refer to camera display for status).
4. Powering On/Off
Press and hold the power button (usually located on the top or front of the camera) to turn the camera on or off.
Operating the Camera
Basic Photography and 4K Video Recording
The Wisoqu Digital Camera supports 48MP still photography and 4K HD video recording. The advanced CMOS technology ensures precise detail capture.

Figure 5: The camera's screen displaying a captured landscape, illustrating its photography capabilities.
Autofocus Dual Camera Function
This camera features an innovative dual-camera design. Switch to the front camera for selfies or use the rear camera for general photography and video recording. The powerful autofocus function helps capture clear and sharp images.

Figure 6: The camera's rear view, emphasizing the screen and lens, which supports both front and rear camera modes.
Webcam and Pause Function
The camera can be connected to a computer via a USB cable and used as a webcam for video calls or live streaming. It also includes a pause function during video recording or playback, allowing for easier editing.

Figure 7: Front view of the camera, showcasing its 48.0 Megapixel resolution and 16x digital zoom capabilities, relevant for video quality.
Digital Zoom
The camera features a 16x digital zoom, allowing you to magnify distant subjects. Use the zoom controls (typically 'W' for wide and 'T' for telephoto) to adjust the zoom level.
Maintenance
- Cleaning: Use the provided cleaning cloth or a soft, dry cloth to wipe the camera body and screen. Do not use liquid cleaners or abrasive materials.
- Lens Care: Gently clean the lens with a lens cleaning cloth or brush. Avoid touching the lens surface with your fingers.
- Storage: When not in use for extended periods, remove the battery and store the camera in a cool, dry place, preferably in its storage bag.
- Battery Care: Recharge the battery regularly, even if not in use, to maintain its lifespan.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Camera does not turn on. | Battery is low or not inserted correctly. | Charge the battery or reinsert it correctly. |
| Cannot take photos/videos. | Memory card is full, not inserted, or corrupted. | Insert a memory card, delete files, or format the card (this will erase all data). |
| Images are blurry. | Lens is dirty, insufficient light, or camera shake. | Clean the lens, use flash if needed, or hold the camera steady. |
| Camera freezes. | Software glitch. | Remove and reinsert the battery to reset the camera. |
Specifications
| Feature | Specification |
|---|---|
| Model Number | Wisoqun3e7fuz8b2-12 |
| Display Screen | 2.8 inches |
| Max Video Resolution | 4K ULTRA HD |
| Max Image Resolution | 48M (8000x6000) |
| Battery Type | NP-6L 700mAh Lithium Battery |
| Storage Support | 4-256GB Memory Card (Not Included) |
| File Formats | JPG, AVI |
| Digital Zoom | 16x |
| Interface | Type-C USB |
| Dimensions | 13 x 9 x 8 cm |
| Weight | 301 g |
Warranty and Support
For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your purchase receipt as proof of purchase.