CAMCAMP Wireless Security Camera System with 10.1" Monitor

Introduction

The CAMCAMP Wireless Security Camera System with a 10.1" monitor provides a comprehensive surveillance solution for your home or business. This system features dual-lens cameras for wide coverage, plug-and-play setup, enhanced wireless connectivity, and 24/7 recording with local storage. It is designed for ease of use and reliable performance in various environments.

What's in the Box

• 4x WiFi Outdoor PTZ Cameras (with DC12V/1A Power Supply)
• 1x 10.1” 10CH NVR Monitor (Built-in 500 GB HDD already)
• 1x DC 12/2A NVR Host Power Supply (2.5-3 M)
• 1x 1M Ethernet Cable & 1x 1M HDMI Cable
• 1x 1M USB2.0 Mouse

Setup Guide

Initial System Setup (Plug & Play)

The CAMCAMP system is designed for quick and easy setup. All cameras are auto-paired to the NVR monitor at the factory, ensuring a true plug-and-play experience.

1. Power the Cameras: Connect each wireless camera to a power outlet using the provided DC12V/1A power supply. Ensure all cameras are continuously powered for uninterrupted operation.
2. Power the NVR Monitor: Connect the 10.1" NVR monitor to a power source using the DC 12/2A NVR Host Power Supply.
3. View Live Feed: Once powered, the cameras will automatically connect to the NVR monitor, and you will see the live video feed within minutes.

Remote Access Setup (Optional)

For remote viewing and playback via mobile devices, the NVR needs to be connected to your router.

1. Connect NVR to Router: Connect the NVR monitor to your home router using the provided Ethernet cable, or connect wirelessly via 2.4G/5G WiFi.
2. Download CloudEye 365 App: Download and install the "CloudEye 365" app on your smartphone or tablet (available for iOS and Android).
3. Add Device: Follow the in-app instructions to add your NVR system for remote access.

Operating Instructions

Dual Lens & Dual View

Each camera features a dual-lens design: a fixed bullet camera for a primary focus point and a PTZ (Pan-Tilt-Zoom) camera that can be remotely controlled. This allows you to monitor two locations simultaneously, providing double view coverage and eliminating blind spots.

PTZ Control

Utilize the NVR monitor or the CloudEye 365 app to control the PTZ camera. You can pan 360°, tilt 90°, and zoom to adjust the viewing angle and focus on specific areas.

Night Vision

The system offers vivid color night vision, ensuring clear footage even in low-light conditions. It also supports traditional IR night vision for enhanced visibility in complete darkness.

Two-Way Audio

Each camera is equipped with a built-in microphone and speaker, enabling two-way audio communication. You can hear what's happening and speak through the camera from anywhere via the app.

Motion Detection & Auto Tracking

The system features AI Humanoid Detection and Auto Tracking. When human movement is detected, the camera can track and follow the movement until the person moves out of view, then return to a preset guard point. You can also configure spotlight and siren alarms to deter intruders.

Recording & Storage

The system supports 24/7 continuous video and audio recording. It comes with a pre-installed 500GB hard drive, expandable up to 6TB, for ample local storage without any subscription fees. Cloud storage options are also available if preferred.

Connectivity & Expandability

The system offers enhanced wireless connectivity, supporting both 2.4G and 5G WiFi for stable and wide signal coverage. The 10CH NVR monitor allows you to expand your surveillance network by adding up to 10 cameras as your security needs evolve.

Maintenance

Weather Resistance

The cameras are IP66 weatherproof, designed to withstand various outdoor conditions, including rain and snow, with an operating temperature range of -20°C (-4°F) to 50°C (122°F).

Video Coding

The system utilizes advanced H.265+ video coding, which saves up to 50% storage space compared to H.264, allowing for longer recording periods on the same storage capacity.

Troubleshooting

If you encounter any issues with your CAMCAMP system, please refer to the following general troubleshooting tips:

• No Video Feed: Ensure all cameras and the NVR monitor are properly powered on and connected. Check the wireless signal strength for each camera on the NVR display.
• Remote Access Issues: Verify that the NVR is connected to your router (via Ethernet or WiFi) and has a stable internet connection. Ensure the CloudEye 365 app is updated to the latest version.
• Recording Problems: Check the available storage space on the 500GB HDD. Ensure recording settings are configured correctly (24/7, event, or schedule).
• Poor Image Quality: Ensure camera lenses are clean and free from obstructions. Check for strong interference sources if experiencing wireless signal degradation.

For detailed troubleshooting steps or specific error messages, please consult the full instruction manual or contact customer support.

Specifications

Warranty & Support

Camcamp is committed to customer satisfaction. We offer:

• 12-Month Replacement: Only replacement, no repair.
• 30-Day Money Back Guarantee: If you are not satisfied with your purchase.
• Lifetime Professional Technical Support: Dedicated support for any technical inquiries or issues.