Armorcope 2K HD Pet Camera User Manual

Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your Armorcope 2K HD Pet Camera. Please read this manual thoroughly before using the device to ensure optimal performance and safety. This camera is designed for indoor use to monitor pets, babies, or for general home security.

Figure 1: Armorcope 2K HD Pet Camera (2-pack shown)

What's in the Box

• Armorcope 2K HD Pet Camera
• User Manual
• Power Adapter (Corded Electric)
• Mounting Accessories (for Surface Mount/Wall Mount/Ceiling Mount)

Product Components

Figure 2: Key components of the Armorcope Pet Camera

• Infrared Light: For night vision functionality.
• Lens: Captures 2K HD video.
• Microphone: For audio input and two-way communication.
• Micro-SD Card Slot: Supports local storage up to 128GB.
• Reset Button: Used for factory reset or re-pairing.
• Call Key: Initiates a one-click call to the paired smartphone.

Setup Instructions

1. Power On: Connect the camera to a power source using the provided power adapter. The camera will power on automatically.
2. Download the App: Download the 'Vicohome APP' from your smartphone's app store (available for iOS and Android).
3. Create Account & Add Device: Open the Vicohome APP, register a new account, and follow the in-app instructions to add your new camera. Ensure your smartphone is connected to a 2.4GHz Wi-Fi network (5GHz Wi-Fi is not supported).
4. Mounting (Optional): The camera can be placed on a flat surface or mounted on a wall or ceiling using the included accessories. For ceiling mounting, ensure the image orientation is adjusted in the app settings.

Operating the Camera

Live View and Pan/Tilt Control

Access the live video feed through the Vicohome APP. You can remotely control the camera's viewing angle with 355° horizontal pan and 100° vertical tilt capabilities to cover all areas of your room.

Figure 3: Remote Pan/Tilt control via smartphone app

Two-Way Audio

The camera features a built-in microphone and speaker, enabling two-way communication. Use the app to speak through the camera or listen to audio from the camera's location.

Figure 4: Two-way audio communication

Smart Motion Detection and Auto Tracking

The camera can detect motion, including human and pet detection. When motion is detected, the app sends a notification to your phone. The auto-tracking feature allows the camera to follow detected movement within its field of view.

Figure 5: Motion detection alert

Figure 6: Auto-tracking in action

MagicPix Night Vision

The camera is equipped with MagicPix Night Vision, providing clear video even in low-light or complete darkness, with an infrared distance of up to 32 feet.

Figure 7: Enhanced night vision clarity

One-Click Call

The camera features a physical call key. When pressed, it initiates a call to the paired smartphone, allowing for quick communication.

Figure 8: One-click call feature

Recording and Storage

Video recordings can be stored either in the cloud (subscription may be required) or locally on a Micro-SD card (up to 128GB, not included). The app provides options for reviewing recorded footage.

Figure 9: Recording and playback interface

Maintenance

• Cleaning: Use a soft, dry cloth to clean the camera lens and body. Avoid using liquid cleaners or abrasive materials.
• Firmware Updates: Periodically check the Vicohome APP for available firmware updates to ensure your camera has the latest features and security enhancements.
• Placement: Ensure the camera is placed in a stable location, away from direct sunlight, heat sources, and excessive moisture.

Troubleshooting

• Camera Not Connecting to Wi-Fi:
  • Ensure your Wi-Fi network is 2.4GHz. The camera does not support 5GHz Wi-Fi.
  • Check Wi-Fi signal strength at the camera's location.
  • Restart your router and the camera.
  • Perform a factory reset using the reset button (refer to Figure 2 for location) and try pairing again.
• No Video Feed:
  • Verify the camera is powered on and connected to Wi-Fi.
  • Check your internet connection.
  • Ensure the Vicohome APP is updated to the latest version.
• Motion Detection Not Working:
  • Check motion detection settings in the Vicohome APP.
  • Adjust sensitivity levels.
  • Ensure there are no obstructions blocking the camera's view.
• Two-Way Audio Issues:
  • Ensure microphone and speaker permissions are granted to the Vicohome APP on your smartphone.
  • Check volume settings on both your phone and within the app.

Specifications

Warranty and Support

For warranty information and technical support, please refer to the official Armorcope website or contact customer service through the Vicohome APP. Keep your purchase receipt for warranty claims.