1. Introduction
Thank you for purchasing the ASHATA Digital Tuning Radio. This manual provides detailed instructions on how to set up, operate, and maintain your new radio. Please read this manual thoroughly before using the product to ensure proper function and to maximize your listening experience.
This versatile device combines DAB/DAB+ and FM radio reception with Bluetooth connectivity, AUX input, and a recording function, all displayed on a clear 2.4-inch color LCD screen.
2. Product Features
- DAB/DAB+ and FM Stereo Radio Receiver: Equipped with high-performance digital signal processor chip and a long antenna for stable radio signals.
- 2.4-inch Color LCD Screen: Backlit display for easy reading in various lighting conditions, including darkness.
- Time Setting and Alarm Functions: Clock can be set manually or synchronized with DAB+ and FM time, supporting alarm and sleep timer functions with time backup.
- Recording Function: Supports recording of DAB+/FM programs.
- Multiple Playback Options: Supports Bluetooth (BT) connectivity, Micro Storage Card (TF card) digital player, and AUX input.
- Headphone Output: Stereo headphone listening function for private listening.
- Long Playtime: Powered by a built-in 2200mAh rechargeable lithium battery.
- USB Connectivity: Supports USB connection for PC upgrade and charging.
- Versatile Use: Ideal for home, office, outdoor travel, sports, leisure, entertainment, and learning.
3. Package Contents
Please check the package for the following items:
- ASHATA Digital Tuning Radio
- USB Charging Cable
- AUX Audio Cable
- User Manual (this document)
4. Product Overview
4.1 Front View
The front panel features the speaker grille, 2.4-inch LCD screen, and control buttons.

Figure 1: Front view of the radio.
4.2 Side View (Ports and Connections)
The side of the radio houses various ports for connectivity.

Figure 2: Side view showing connectivity ports.
4.3 Back View (Battery Compartment)
The back of the radio includes the battery compartment and product information.

Figure 3: Back view of the radio.
5. Setup
5.1 Charging the Battery
- Connect the supplied USB charging cable to the radio's USB port.
- Connect the other end of the USB cable to a standard USB power adapter (5V/1A recommended) or a computer's USB port.
- The charging indicator on the screen will show the charging status. A full charge typically takes a few hours.
- Disconnect the cable once fully charged.
5.2 Inserting a Micro SD Card (TF Card)
To use the digital player or recording function, insert a Micro SD card (up to 128GB, not included).
- Locate the Micro SD card slot on the side of the radio.
- Gently insert the Micro SD card with the gold contacts facing down until it clicks into place.
- To remove, push the card in slightly until it springs out.
5.3 Initial Power On
Press and hold the Power button (usually labeled with a power symbol) to turn on the radio. The screen will light up, and the device will enter the last used mode or default to DAB/FM radio.
6. Operating Instructions
6.1 Basic Operation
- Power On/Off: Press and hold the Power button.
- Volume Control: Use the Vol+ and Vol- buttons to adjust the volume.
- Mode Selection: Press the Func button to cycle through DAB, FM, Bluetooth, AUX, and TF Card modes.
- Menu Navigation: Use the Menu button to access settings and options. Use arrow keys or tuning buttons to navigate and Enter to confirm.
6.2 DAB/DAB+ Radio Mode
- Switch to DAB mode using the Func button.
- Scanning for Stations: If it's the first time or you want to rescan, press the Scan button. The radio will automatically search for available DAB/DAB+ stations.
- Selecting Stations: Use the Tuning+ or Tuning- buttons to browse through the list of found stations. Press Enter to select a station.
6.3 FM Radio Mode
- Switch to FM mode using the Func button.
- Automatic Scan: Press the Scan button to automatically search and save available FM stations.
- Manual Tuning: Use the Tuning+ or Tuning- buttons for fine-tuning.
- Selecting Stations: Use the number buttons (1-5) or the List button to select saved stations.
6.4 Bluetooth (BT) Mode
- Switch to BT mode using the Func button. The screen will display "BT Pairing" or similar.
- Enable Bluetooth on your external device (smartphone, tablet, etc.).
- Search for
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.