Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Hooke Road Side Steps Running Boards, Model GB8902-S. These running boards are designed for Ford Bronco 4-Door models from 2021 to 2025 (excluding Bronco Sport). They offer a wide stepping surface for easy entry and exit, and function as heavy-duty rock sliders to protect your vehicle.
Image: Hooke Road Side Steps Running Board installed on a white Ford Bronco, showcasing the product's appearance and fit.
Package Contents
Verify that all items listed below are present in your package:
- Running Boards (Driver & Passenger Side)
- Mounting Hardware Kit
- Installation Instruction
Specifications
| Feature | Detail |
|---|---|
| Brand | Hooke Road |
| Material | Carbon Steel |
| Color | Black |
| Item Weight | 70 Pounds |
| Vehicle Service Type | Sport Utility Vehicle |
| Exterior Finish | Textured |
| Automotive Fit Type | Vehicle Specific Fit |
| Product Dimensions | 73 x 7.3 x 5.39 inches |
| Model Number | GB8902-S |
Image: Detailed dimensions of the running board, showing length, width, and height measurements.
Setup and Installation
The Hooke Road Side Steps are designed for a simple direct-mount installation, requiring no cutting or drilling. They utilize existing factory mounting points for a secure fit. It is recommended to have assistance during installation.
General Installation Steps:
- Prepare the Vehicle: Ensure the vehicle is on a level surface and properly secured.
- Identify Mounting Points: Locate the factory mounting points along the vehicle's frame.
- Attach Brackets: Secure the mounting brackets to the vehicle's frame using the provided hardware. Do not fully tighten at this stage to allow for adjustments.
- Position Running Boards: Carefully lift and align the running boards with the attached brackets.
- Secure Running Boards: Fasten the running boards to the brackets using the remaining hardware.
- Adjust and Tighten: Adjust the position of the running boards as needed, then fully tighten all hardware to ensure a secure installation.
Installation Visual Guides:
For a visual guide on the installation process, please refer to the following videos:
Video: Step-by-step Installation for the Bronco
This video provides a detailed, step-by-step guide for installing running boards on a Ford Bronco, demonstrating the process from start to finish.
Video: Bronco 4 Doors Running Boards Side Steps Installation
This video illustrates the installation of side steps for a 4-door Bronco, focusing on key attachment points and procedures.
Video: How to Install 2021-2024 Ford Bronco 4-Door Running Boards
A comprehensive installation video specifically for 2021-2024 Ford Bronco 4-Door running boards, detailing the mounting process.
Video: Install instructions for IAG Full Length EZ-Steps
This video provides general installation instructions for full-length steps on a Bronco, which can be used as a reference for similar products.
Operating Instructions
The Hooke Road Side Steps Running Boards serve a dual purpose:
- Easy Entry/Exit: The wide stepping surface (5.2 inches) provides a stable platform for convenient access to and from your vehicle.
- Rock Slider Functionality: Constructed from durable steel tubing and plates, these running boards also act as heavy-duty rock sliders. They are engineered to shield your vehicle's body and paint from trail debris, rocks, and side impacts during off-road adventures.
Image: Side view of the running board installed on a white Ford Bronco, demonstrating its function as a step.
Maintenance
To ensure the longevity and appearance of your Hooke Road Side Steps Running Boards, follow these maintenance guidelines:
- Regular Cleaning: Clean the running boards regularly with mild soap and water to remove dirt, mud, and road grime.
- Inspect for Damage: Periodically inspect the textured black powder-coat exterior for any scratches or signs of wear. The premium interior E-coating helps prevent rust, but external damage should be addressed promptly.
- Check Fasteners: Regularly check all mounting hardware to ensure it remains tight and secure. Re-tighten if necessary.
Troubleshooting
If you encounter any issues with your Hooke Road Side Steps Running Boards, consider the following:
- Loose Fit: If the running boards feel loose, re-check and tighten all mounting bolts and nuts.
- Unusual Noises: Inspect for any loose components or contact points between the running boards and the vehicle frame. Ensure all parts are correctly installed and tightened.
- Missing Hardware: In case of missing hardware, contact Hooke Road customer support for assistance.
For further assistance, please contact Hooke Road customer support.
Warranty and Support
Your Hooke Road Side Steps Running Boards come with a 2-year manufacturer warranty covering transit damage or verified defects. Additionally, Hooke Road provides lifetime customer support for any inquiries or assistance you may need.
For warranty claims or customer support, please refer to the contact information provided with your purchase or visit the official Hooke Road website.
