Introduction
This instruction manual provides detailed guidance for the assembly, painting, and care of your Revell 03805 Westland Lynx Helicopter 1:72 Scale Plastic Model Kit. Please read all instructions carefully before beginning assembly to ensure a successful and enjoyable modeling experience.
Image: The product box for the Revell 03805 Westland Lynx Helicopter model kit, showing the completed model and key specifications.
Safety Information
Warning: This model kit contains small parts and sharp edges. Not suitable for children under 12 years without adult supervision. Keep out of reach of very young children. Always use modeling tools, glues, and paints in a well-ventilated area. Avoid contact with eyes and skin. Refer to the safety instructions provided with your chosen glues and paints.
Package Contents
Your Revell 03805 Westland Lynx Helicopter model kit includes the following components:
- Plastic sprues with model parts
- Instruction Guide
- Decal Set for British and German versions
Image: A view of the plastic sprues containing the various parts for the Revell Westland Lynx helicopter model kit.
Setup and Assembly
Tools Required (Not Included)
- Plastic cement/glue
- Hobby knife or sprue cutters
- Sandpaper or sanding sticks (fine grit)
- Tweezers
- Small paintbrushes
- Model paints (acrylic or enamel, as per guide)
- Decal setting solution (optional)
Assembly Steps
Follow the numbered steps in the included instruction guide. The general process involves:
- Part Preparation: Carefully remove parts from the sprues using cutters or a hobby knife. Clean any excess plastic (flash) with a hobby knife or sandpaper.
- Sub-Assembly: Assemble smaller components first, such as the cockpit, landing gear, and rotor blades, as indicated in the guide.
- Main Fuselage Assembly: Join the fuselage halves, ensuring a tight fit. Use plastic cement sparingly. Allow adequate drying time.
- Component Attachment: Attach sub-assemblies like the main rotor, tail rotor, landing gear, and external armaments to the main fuselage. The main rotor is designed to be rotatable.
Image: A detailed view of the assembled cockpit and nose section of the Westland Lynx model, showing intricate details.
Image: An overhead view of the main rotor assembly on the Revell Westland Lynx model, highlighting the rotatable feature.
Image: A side profile of the Revell Westland Lynx model, showcasing the landing gear and external armament details.
Image: A rear view of the Revell Westland Lynx model, focusing on the tail rotor and its markings.
Painting and Decals
Refer to the included painting guide for recommended colors and schemes for both British and German versions. Apply decals after painting and a clear gloss coat for best results. Use decal setting solution to help decals conform to irregular surfaces.
Display and Handling
Once assembled and painted, your Revell Westland Lynx model is ready for display. Handle the model carefully, especially delicate parts like rotor blades and antennas, to prevent damage. Avoid exposing the model to direct sunlight or extreme temperatures, which can cause paint fading or plastic warping.
Maintenance
To keep your model in pristine condition:
- Cleaning: Dust the model regularly with a soft, dry brush or a can of compressed air. Avoid using harsh chemicals or abrasive materials.
- Storage: If storing the model, place it in a dust-free environment, ideally in a display case or a sealed container.
- Repairs: Minor damage can often be repaired with plastic cement and touch-up paint.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Parts do not fit together | Excess plastic (flash) on parts; incorrect part orientation. | Carefully trim flash with a hobby knife. Double-check the instruction guide for correct part placement. |
| Decals wrinkle or tear | Surface not smooth; decal too dry; improper application. | Ensure painted surface is smooth. Use enough water for decal release. Apply decal setting solution to help it conform. |
| Paint does not adhere well | Surface not clean; paint too thick/thin; incompatible paint type. | Wash parts with mild soap and water before painting. Thin paint as recommended by manufacturer. Use paints designed for plastic models. |
Specifications
- Model Name: Revell 03805 Westland Lynx Helicopter 1:72 Scale Unbuilt/Unpainted Plastic Model Kit
- Scale: 1:72
- Number of Parts: 40
- Material: Plastic
- Recommended Age: 12 Years+
- Special Features: Rotatable rotor, detailed surfaces, decals for British and German versions.
- Dimensions (assembled, approx.): 6.89 x 6.54 x 1.73 inches (L x W x H)
Warranty and Support
For information regarding product warranty, missing parts, or technical support, please refer to the official Revell website or contact Revell customer service directly. Contact details are typically provided on the product packaging or the manufacturer's official website.
You can visit the official Revell store on Amazon for more products and information: Revell Store
