Introduction
Thank you for choosing the Olvy Electric Nasal Irrigator. This device is designed to provide effective and comfortable nasal irrigation, helping to relieve symptoms associated with colds, flu, sinusitis, and allergies. Please read this manual thoroughly before first use to ensure proper operation and maintenance.
The Olvy Electric Nasal Irrigator, designed for daily nasal hygiene, is shown on a clean bathroom counter next to a sink, emphasizing its sleek design and ease of integration into a daily routine.
Important Safety Information
Always follow basic safety precautions when using electrical products, especially when children are present. This device is intended for personal nasal hygiene only. Consult a healthcare professional before use if you have any pre-existing medical conditions or concerns.
- Do not immerse the main unit in water beyond its IPX7 rating.
- Use only distilled water or sterile water for irrigation. Tap water is not recommended unless boiled and cooled.
- Do not use if nasal passages are completely blocked or if you have an acute ear infection.
- Keep out of reach of children.
- Ensure the device is fully charged before use to avoid interruptions.
- Clean the device thoroughly after each use to prevent bacterial growth.
Package Contents
Please check the package contents to ensure all items are present:
- 1 x Olvy Electric Nasal Irrigator Main Unit
- 6 x Nozzles (various sizes for adults and children)
- 50 x Nasal Rinse Salt Packets
- 1 x USB Charging Cable
- 1 x User Manual
A complete set of the Olvy Electric Nasal Irrigator, including the main unit, various nozzles, nasal rinse salt packets, and charging cable, laid out on a clean surface.
Product Overview
The Olvy Electric Nasal Irrigator features an ergonomic design for comfortable handling and a transparent water tank for easy monitoring of the solution level. It includes multiple pressure settings and interchangeable nozzles to suit different users and needs.
The Olvy Electric Nasal Irrigator main unit is displayed alongside its various nozzles and the box of nasal rinse salt packets, highlighting the complete system.
Key Features:
- 6 Nozzles: For adults and children.
- 50 Salt Packets: Included for prolonged use.
- Effective Cleaning: Removes mucus, allergens, and irritants.
- 360-Degree Rotating Nozzle: Ensures comprehensive cleaning.
- Easy One-Click Operation: Simple to use.
- Powerful Battery: Up to 25 days of use on a 4-hour charge.
- IPX7 Waterproof: Easy to clean without damage.
A hand holding the Olvy Electric Nasal Irrigator, demonstrating its ergonomic design and ease of grip.
Setup
Charging the Device:
Before first use, fully charge the Olvy Electric Nasal Irrigator. Connect the USB charging cable to the device and a suitable power source. A full charge takes approximately 4 hours and provides up to 25 days of use.
An illustration showing the Olvy Electric Nasal Irrigator charging, with a clock indicating a 3-hour charging time for 50 daily uses, emphasizing its long battery life.
Preparing the Saline Solution:
It is crucial to use a proper saline solution for nasal irrigation. Use only distilled or sterile water. Do not use plain tap water directly.
- Twist the main unit to open the water tank.
- Fill the tank with 300ml of distilled or sterile water.
- Add one packet of nasal rinse salt (2.6g) to the water.
- Stir gently or shake the device to dissolve the salt completely.
An image demonstrating the process of adding a 2.6g salt packet to 300ml of water in the Olvy Electric Nasal Irrigator's tank to prepare the saline solution.
A visual guide explaining different types of saline solutions: Isotonic (2.7g salt in 300ml water), Hypertonic (6-9g salt in 300ml water for strong congestion), and Hypotonic (less than 2.7g salt in 300ml water for specific medical conditions).
Attaching the Nozzle:
Select the appropriate nozzle for your needs (adult or child). Firmly insert the chosen nozzle onto the top of the main unit until it clicks into place.
An illustration showing the difference between adult and child nozzles for the Olvy Electric Nasal Irrigator, demonstrating how they fit into the nasal passage.
Operating Instructions
Follow these steps for effective nasal irrigation:
A four-step visual guide demonstrating how to use the Olvy Nasal Irrigator: 1. Fill water tank and mix salt solution, 2. Install nozzle, 3. Select mode, 4. Press ON/OFF button and rinse.
- Select Mode: The device offers three pressure modes:
- Normal: Standard pressure for regular use.
- Pulse: Pulsating flow for deeper cleaning, recommended for experienced users.
- Soft: Gentle flow, recommended for sensitive nasal passages or new users.
A close-up of the Olvy Electric Nasal Irrigator's control panel, showing the three pressure settings: Normal, Pulsating, and Soft, with corresponding indicator lights.
- Positioning: Lean slightly forward over a sink. Keep your mouth open and breathe through your mouth. Do not hold your breath.
- Irrigation: Gently insert the nozzle into one nostril, ensuring a snug fit. Press the ON/OFF button to start the irrigation. The solution will flow through one nostril and exit the other.
- Repeat: Once half of the solution has been used, switch to the other nostril and repeat the process.
- Post-Irrigation: Gently blow your nose to clear any remaining solution. Do not blow too hard, as this can cause ear discomfort.
A woman demonstrating the proper technique for using the Olvy Electric Nasal Irrigator, leaning over a sink with the device inserted into her nostril, illustrating a quick and natural relief.
Nozzle Specifics:
Small Nozzle & Soft Mode
This small nozzle is designed for a gentle water flow, ideal for sensitive nasal passages. The Soft mode reduces water volume for a milder stream, preventing discomfort.
Large Nozzle & Pulse Mode
The large single-opening silicone nozzle creates a strong water flow, ideal for experienced users who desire powerful cleaning. Two double-opening nozzles are included for easy replacement and more flexibility in nasal rinsing.
Maintenance
Cleaning the Device:
Proper cleaning after each use is essential for hygiene and device longevity.
- Empty any remaining solution from the water tank.
- Rinse the water tank and nozzles thoroughly with clean water.
- The main unit is IPX7 waterproof, allowing for easy rinsing under running water. Do not submerge for extended periods.
- Allow all components to air dry completely before reassembling or storing.
- Store the device in a clean, dry place.
The Olvy Electric Nasal Irrigator submerged in water, illustrating its IPX7 waterproof rating for easy cleaning and improved durability.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not turning on. | Low battery. | Charge the device for at least 4 hours. |
| Weak water flow. | Nozzle clogged or water tank empty. | Clean the nozzle. Refill the water tank. Ensure nozzle is properly attached. |
| Solution not flowing out of the other nostril. | Nasal passage blockage or incorrect positioning. | Adjust head position. If blockage persists, consult a doctor. Ensure mouth is open. |
| Discomfort during use. | Incorrect water temperature or saline concentration. | Use lukewarm water. Ensure correct salt-to-water ratio. Try "Soft" mode. |
Specifications
- Model: Weiß Pro 12
- Brand: Olvy
- Power Source: Battery Powered
- Water Resistance Rating: IPX7 Waterproof
- Material: Plastic
- Color: White
- Charging Time: Approximately 4 hours
- Battery Life: Up to 25 days (based on typical usage)
- Country of Origin: China
- Care Instructions: Hand wash only (for detachable parts)
- Age Range: Adult (with specific nozzles for children)
Warranty and Support
For warranty information or technical support, please contact Olvy customer service through the retailer where you purchased the product or visit the official Olvy website. Please retain your proof of purchase for any warranty claims.
