Ledvion 1m Single-Phase Track Lighting System with 4 GU10 Adjustable Spotlights, White

Introduction

This manual provides instructions for the safe and efficient installation, operation, and maintenance of your Ledvion 1m Single-Phase Track Lighting System. Please read this manual thoroughly before installation and retain it for future reference.

The Ledvion track lighting system offers a modern and flexible lighting solution for various indoor spaces. It features a 1-meter single-phase track with four adjustable GU10 spotlights, allowing you to direct light precisely where needed. The system is designed for easy installation and is compatible with energy-efficient LED GU10 lamps, offering dimmable functionality with an external dimmer (not included).

Image: The Ledvion track lighting system installed in a modern closet, demonstrating its application in illuminating specific areas.

Safety Information

WARNING: Electrical installation should only be performed by a qualified electrician or in accordance with local electrical codes. Always disconnect power at the main circuit breaker before installation, maintenance, or changing lamps.

• Ensure the power supply is turned off before handling any electrical components.
• Do not exceed the maximum wattage specified for GU10 lamps.
• This product is designed for indoor use only.
• Keep the product away from water and moisture.
• Do not attempt to modify the product. Any modifications may void the warranty and pose safety risks.
• Ensure all connections are secure to prevent electrical hazards.

What's in the Box

Verify that all components are present and undamaged before proceeding with installation.

• 1x 1-meter Single-Phase Track
• 4x GU10 Adjustable Spotlights (lamps not included)
• Mounting hardware (screws, wall plugs)
• Power connector

Image: An exploded view of the Ledvion track lighting system components, including the track, four spotlights, and installation hardware.

Setup and Installation

Follow these steps for proper installation of your track lighting system.

1. Prepare for Installation

• Turn off Power: Locate the main circuit breaker and turn off the power to the area where you will install the track lighting.
• Mark Mounting Points: Hold the track against the ceiling or wall at the desired installation location. Use a pencil to mark the drilling points for the mounting screws.

2. Mount the Track

• Drill Holes: Drill holes at the marked points. Insert the provided wall plugs if necessary.
• Secure Track: Attach the track to the ceiling or wall using the provided screws. Ensure the track is securely fastened.

3. Connect Power

• Wire Connection: Connect the electrical wires from your ceiling/wall to the power connector of the track. Ensure correct polarity (Live, Neutral, Earth).
• Secure Connector: Attach the power connector to the track.

4. Install Spotlights

The spotlights feature a plug-and-play locking system for easy installation.

Image: Visual guide for the plug-and-play installation of a spotlight onto the track, showing the unlock and lock positions.

• Insert GU10 Lamps: Gently insert GU10 lamps (not included) into each spotlight fixture.
• Attach Spotlights: Align the spotlight adapter with the track. Push the spotlight into the track and rotate the locking mechanism to secure it in place.
• Reposition: Spotlights can be easily added, removed, or repositioned along the track as needed.

Image: A detailed view of a single GU10 spotlight mounted on the track, showing its connection point.

Operating Instructions

Once installed, your Ledvion track lighting system is ready for use.

• Power On: Restore power at the main circuit breaker.
• Adjust Spotlights: Each spotlight can be tilted up to 90 degrees and rotated 350 degrees horizontally. Adjust the spotlights to direct light to your desired areas.

Image: A visual representation of the adjustable features of the spotlights, showing their range of motion for tilting and rotation.

• Dimming (Optional): If using dimmable GU10 LED lamps and an external dimmer switch (not included), you can adjust the light intensity.
• Anti-Glare Grid (Optional): If you have the optional anti-glare grid, it can be easily added or removed from the front of the spotlight to prevent glare.

Image: The optional anti-glare grid feature, showing its honeycomb structure and ease of installation/removal from the spotlight.

Maintenance

• Cleaning: Disconnect power before cleaning. Wipe the track and spotlights with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Lamp Replacement: Ensure power is off. Carefully remove the old GU10 lamp and insert a new one.
• Inspection: Periodically check all connections and mounting points for security.

Troubleshooting

Specifications

• Brand: Ledvion
• Model Number: LVT10002_1m4s
• Product Dimensions: 105 x 15 x 15 cm
• Item Weight: 1.36 kg
• Material: Aluminum
• Number of Lights: 4
• Voltage: 230 Volts
• Power Source: Electrical
• Bulb Type: LED (GU10 fitting, lamps not included)
• Style: Single-Phase Track Lighting System

Image: A diagram illustrating the key dimensions of the track and spotlights, including track length (1000mm) and spotlight height (150mm) and diameter (50mm).

Warranty and Support

This Ledvion product is covered by a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact Ledvion customer support.

For technical assistance, troubleshooting, or questions regarding your product, please contact Ledvion customer service through their official website or the retailer where the product was purchased.

Optional Accessories

Expand your Ledvion track lighting system with optional accessories (sold separately) to customize your lighting setup.

Image: An overview of optional accessories such as power feeders with cover plates or I-connectors, X-connectors, T-connectors, and pendant spotlights, allowing for system expansion.