WLIVE Single Bed Frame with Movable Outlet and Headboard User Manual

Important Safety Information

Please read all instructions carefully before assembly and use.

• Do not exceed the maximum load capacity of 200kg. Overloading can cause damage and injury.
• Assemble the bed frame strictly following the provided instructions. Incorrect assembly may lead to instability.
• Exercise caution during assembly and use to prevent personal injury. Keep hands and fingers clear of moving parts and pinch points.
• Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not allow children to play on or around the bed frame unsupervised.

Product Overview

The WLIVE Single Bed Frame with Movable Outlet and Headboard is designed for comfort, durability, and convenience. It features an innovative headboard with a movable power outlet, an ergonomic backrest, and a sturdy slatted base for optimal support and ventilation. The design also incorporates ample under-bed storage space.

Figure 1: WLIVE Single Bed Frame with Movable Outlet and Headboard.

This image shows the assembled bed frame in a bedroom, highlighting its modern design and integrated headboard.

Key Features

• Movable Outlet Headboard

  The innovative headboard includes a movable power outlet with two ports, allowing you to position it anywhere along the headboard for convenient charging of devices like smartphones and earphones, or for powering indirect lighting. The wide headboard also provides space to keep small items within easy reach.

  

  Figure 2: Movable outlet on headboard.

• Ergonomic High Backrest

  The backrest is ergonomically designed at a 97-degree angle to provide optimal comfort and reduce strain on your lower back, back, and shoulders when reading or watching TV in bed. All frame edges are chamfered to prevent snagging bedding or accidental injury.

  

  Figure 3: Ergonomic backrest design.

• Sturdy Central Support Design

  Constructed with thick slats and a unique W-shaped frame structure, this bed frame offers high durability and a robust load capacity of 200kg. Reinforced bed posts provide excellent support, ensuring a stable and secure sleeping experience without concerns of breakage.

  

  Figure 4: Sturdy frame with 200kg load capacity.

• Large Capacity Under-Bed Storage

  With a generous height of 32.5cm from the floor to the frame, this bed provides ample under-bed space. This makes cleaning easier and offers significant storage for items such as storage cases, seasonal goods, or rugs, helping to keep your room tidy and organized.

  

  Figure 5: Ample under-bed storage.

• Excellent Ventilation with Slatted Base

  The highly breathable slatted base allows moisture to escape efficiently, reducing concerns about mold, especially in poorly ventilated rooms or when futons cannot be aired out. This feature ensures comfortable sleep throughout all seasons by promoting air circulation.

  

  Figure 6: Ventilated slatted base.

• Safe and Natural Wood Construction

  Crafted from natural, clean Nordic pine wood, the bed frame brings a touch of nature into your home. The natural pine scent provides a subtle, rustic aroma. Its warm wood-grain color blends seamlessly with various home decors. Strict quality inspections ensure the product is safe for use by all ages, including children and the elderly.

Specifications

Figure 7: Product dimensions and load capacity.

This diagram illustrates the key measurements of the bed frame, including width, length, height, and under-bed clearance, along with its maximum load capacity.

Setup and Assembly

The WLIVE bed frame is designed for straightforward assembly. While specific step-by-step instructions are typically included in the product packaging, here are general guidelines to assist you:

1. Unpack Components: Carefully unpack all parts from the packaging. Verify that all components listed in the parts list (usually found in the included manual) are present and undamaged.
2. Prepare Assembly Area: Choose a spacious, clean, and flat area for assembly. Lay down a blanket or cardboard to protect your floor and the bed frame components from scratches.
3. Assemble Frame Sections: Begin by connecting the main frame sections according to the diagrams. Ensure all connections are aligned correctly before tightening screws.
4. Install Slats: Once the main frame is stable, install the wooden slats onto the designated supports. Ensure they are evenly spaced and securely fitted.
5. Attach Headboard: Secure the headboard to the main frame. Pay attention to the movable outlet mechanism during this step.
6. Final Tightening: Once all parts are assembled, go back and securely tighten all screws and fasteners. Do not overtighten, but ensure a firm connection.
7. Check Stability: Gently shake the assembled bed frame to ensure it is stable and all connections are secure.

Tip: An electric screwdriver or impact driver can significantly speed up the assembly process, especially given the number of bolts.

Operating Instructions

Using the Movable Outlet

The headboard features a unique movable power outlet. To use it, simply slide the outlet unit along the rail to your desired position. Plug your devices into the two available power ports for charging or to power small electronics like lamps.

Utilizing Under-Bed Storage

The generous 32.5cm clearance beneath the bed frame provides ample space for storage. You can place storage bins, boxes, or seasonal items directly on the floor under the bed. This space is also convenient for easy cleaning with a vacuum cleaner or robot vacuum.

Maintenance

• Cleaning: Wipe the wooden surfaces of the bed frame with a dry cloth. Avoid using abrasive cleaners or excessive moisture, which can damage the wood finish.
• Ventilation: The slatted base promotes air circulation. To maintain optimal ventilation and prevent mold, ensure adequate airflow around and under the bed. Periodically air out your mattress and bedding.
• Fastener Check: Over time, screws and fasteners may loosen. Periodically check all connections and re-tighten them as needed to maintain the bed's stability and structural integrity.
• Load Capacity: Always adhere to the maximum load capacity of 200kg to prevent damage to the frame and slats.

Troubleshooting

Warranty and Support

WLIVE provides a one-year warranty for this product, covering manufacturing defects and material flaws under normal use. Please retain your proof of purchase for warranty claims.

Customer Support

For any questions, concerns, or assistance with assembly, parts, or warranty claims, please contact WLIVE customer support. Refer to the contact information provided in your product packaging or visit the official WLIVE store on Amazon:

Visit WLIVE Store on Amazon.co.jp