1. Product Overview
The Vieta Pro VM-BS1000WH is a portable, battery-powered Bluetooth speaker designed for high-quality audio playback. Its elegant design allows it to integrate seamlessly into various environments, while its robust features make it suitable for both indoor and outdoor use.
Figure 1: Front view of the Vieta Pro VM-BS1000WH Portable Bluetooth Speaker.
2. Key Features
- Bluetooth 5.3: Advanced wireless technology for fast and stable connections.
- TWS (True Wireless Stereo) Mode: Enables a true wireless stereo sound experience for immersive listening.
- IPX7 Water Resistance: Certified to withstand splashes and brief immersion in water.
- USB Player: Allows direct music playback from a USB drive.
- 10-Hour Battery Life: Provides extended use without frequent recharging.
- Shock-resistant design: Enhanced durability for active lifestyles.
- Touch Control: Intuitive control method for ease of use.
3. Setup Guide
3.1. Charging the Speaker
Before initial use, fully charge the speaker. Connect the provided USB charging cable to the speaker's charging port and a compatible USB power adapter (not included). The charging indicator light will illuminate during charging and turn off when fully charged. A full charge provides up to 10 hours of playback.
3.2. Powering On/Off
To power on the speaker, press and hold the power button located on the control panel until you hear an audible prompt and the indicator light turns on. To power off, press and hold the power button again until the indicator light turns off.
Figure 2: Side view of the speaker, highlighting the control panel and ports.
4. Operating Instructions
4.1. Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth pairing mode (indicated by a flashing LED).
- On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "Vieta Pro VM-BS1000WH" from the list of devices.
- Once paired, the speaker will emit an audible confirmation, and the LED indicator will become solid.
4.2. TWS (True Wireless Stereo) Mode
To achieve a true wireless stereo experience, you can pair two VM-BS1000WH speakers together:
- Ensure both speakers are powered on and not connected to any other Bluetooth device.
- On one speaker, press and hold the TWS button (refer to the control panel diagram) until you hear a pairing tone.
- The two speakers will automatically connect to each other. Once connected, one speaker will act as the master and the other as the slave.
- Now, connect your device to the master speaker via Bluetooth as described in section 4.1. Audio will play in stereo through both speakers.
4.3. USB Playback
Insert a USB drive containing MP3 audio files into the USB port on the speaker. The speaker will automatically detect the USB drive and begin playing music. Use the playback controls to navigate tracks.
4.4. Volume and Playback Control
The speaker features touch controls for volume adjustment and music playback:
- Volume Up: Tap the '+' button.
- Volume Down: Tap the '-' button.
- Play/Pause: Tap the Play/Pause button.
- Next Track: Press and hold the '+' button.
- Previous Track: Press and hold the '-' button.
Figure 3: Side profile of the speaker, illustrating its compact design.
5. Maintenance
5.1. Cleaning
Wipe the speaker with a soft, dry cloth. Do not use abrasive cleaners, alcohol, or chemical solvents, as these may damage the surface. Ensure all ports are dry before charging or connecting other devices.
5.2. Water Resistance (IPX7)
The VM-BS1000WH speaker is IPX7 water-resistant, meaning it can be immersed in water up to 1 meter for up to 30 minutes. However, it is not designed for continuous underwater use. Always ensure the charging port cover is securely closed before exposing the speaker to water. After exposure to water, dry the speaker thoroughly before charging.
6. Troubleshooting
- No Power: Ensure the speaker is charged. Connect it to a power source and try again.
- Cannot Pair Bluetooth: Make sure the speaker is in pairing mode and within range of your device. Disconnect from any previously paired devices. Try restarting both the speaker and your device.
- No Sound: Check the volume levels on both the speaker and your connected device. Ensure the speaker is properly paired.
- Poor Sound Quality: Move the speaker closer to your Bluetooth device to reduce interference. Ensure there are no obstructions between the speaker and the device.
- USB Playback Not Working: Ensure the USB drive is formatted correctly (FAT32) and contains compatible audio files (MP3). Try a different USB drive.
7. Technical Specifications
| Feature | Specification |
|---|---|
| Brand Name | Vieta Pro |
| Model Name | VM-BS1000WH |
| Speaker Type | Portable Bluetooth Speaker |
| Max Speaker Output Power | 25 Watts |
| Connectivity Technology | Bluetooth |
| Bluetooth Version | 5.3 |
| Audio Output Mode | Stereo |
| Water Resistance Level | IPX7 (Water Resistant) |
| Battery Life | Up to 10 hours |
| Power Source | Battery Powered (1 C battery included) |
| Control Method | Touch |
| Speaker Size | 7.5 cm |
| Product Dimensions (D x W x H) | 7.7 x 5.6 x 17.1 cm |
| Compatible Devices | Smartphone, Tablet, Laptop, MP3 Player |
| Special Features | Shock-resistant, Wireless speakers, USB port |
8. Warranty and Support
8.1. Limited Warranty
This Vieta Pro VM-BS1000WH speaker comes with a Limited Warranty. Please refer to the warranty card included in the product packaging for detailed terms and conditions, including coverage period and limitations. Keep your proof of purchase for warranty claims.
8.2. Customer Support
For technical assistance, troubleshooting, or warranty inquiries, please contact FRAMASON AUDIO S.A., the manufacturer. Contact information can typically be found on the product packaging or the official Vieta Pro website. Please have your model number (VM-BS1000WH) and proof of purchase ready when contacting support.
