PARTPHONER STR-FP-0149

PARTPHONER Industrial Floor Lamp User Manual

Model: STR-FP-0149

1. Introduction

Thank you for purchasing the PARTPHONER Industrial Floor Lamp. This manual provides essential information for the safe and efficient use of your new lamp. Please read these instructions carefully before assembly and operation, and retain them for future reference.

This adjustable floor lamp features a rustic farmhouse design with an aged brown finish, suitable for various interior styles. It includes a dimmable LED bulb with multiple color temperatures and is controllable via a rotary switch or a remote control.

2. Safety Information

  • Ensure the power is off before installation, cleaning, or replacing the bulb.
  • Do not connect the electricity until your lamp is fully assembled.
  • This lamp is designed for indoor use only. Do not expose to water or high humidity.
  • Use only the specified bulb type and wattage (E26 base, 8W LED included, max 60W incandescent equivalent).
  • Keep the lamp away from flammable materials.
  • Do not attempt to modify or repair the lamp yourself. Contact qualified personnel for service.
  • Ensure the base is stable on a flat surface to prevent tipping.

3. Package Contents

Verify that all components are present and undamaged before assembly.

  • Lamp Base
  • Multiple Pole Sections
  • Lamp Head with Shade
  • 8W Dimmable LED Bulb (E26)
  • Remote Control (AAA batteries not included)
  • User Manual

4. Assembly Instructions

Follow these steps to assemble your floor lamp:

  1. Step 1: Place the pole into the base and screw it tight.
  2. Step 2: Screw the remaining pole sections together one by one, ensuring they are securely fastened.
  3. Step 3: Tighten the screw to fix the assembled poles.
  4. Step 4: Remove the wire protection cover, then pass the wire through the hole to tighten the pole.
  5. Step 5: Fix the lampshade to the lamp head.
  6. Step 6: Install the included LED bulb into the E26 socket.
Diagram showing six steps for assembling the PARTPHONER Industrial Floor Lamp. Steps include attaching the pole to the base, screwing pole sections together, tightening screws, routing the wire, attaching the lampshade, and installing the bulb.

Figure 4.1: Lamp Assembly Steps

Close-up view of the lamp's rotary switch, height adjustable knob, and solid metal base, highlighting key components for assembly and adjustment.

Figure 4.2: Key Components: Rotary Switch, Height Adjustable Knob, Solid Metal Base

5. Operating Instructions

5.1 Power On/Off

  • Rotary Switch: Turn the rotary switch located on the lamp head clockwise to turn the lamp on, and counter-clockwise to turn it off.
  • Remote Control: Press the power button (On/Off) on the remote control to turn the lamp on or off.

5.2 Adjusting Height and Shade Angle

The lamp's height can be adjusted between 52 inches and 65.32 inches. Loosen the height adjustable knob on the pole, slide the upper section to your desired height, and then tighten the knob securely. The lamp head can swivel 220° to direct light as needed.

Diagram illustrating the adjustable height feature of the lamp and the 220-degree rotatable lampshade, showing arrows indicating movement.

Figure 5.1: Flexible Height and Shade Adjustment

5.3 Dimmable LED Bulb and Color Temperatures

The included 8W LED bulb offers 1000 lumens of brightness and features 3 color temperatures (3000K, 4000K, 5000K-6500K) and 6 light levels. It also includes 5 scene light modes.

  • Brightness Adjustment: Use the brightness increase key (+) and decrease key (-) on the remote control.
  • Color Temperature Change: Use the color temperature switch (K) on the remote control to cycle through 3000K (Warm light), 4000K (Natural white), and 5000K-6500K (Daylight white).
  • Scene Modes: The remote control includes buttons for various scene modes such as Small Night Mode, Reading Mode, and Operating Mode.
Three images of the floor lamp showing different color temperatures: 2700K (Warm light), 4000K (Natural white), and 6000K (Daylight white).

Figure 5.2: Dimmable Color Temperatures

Image showing the floor lamp with three inset pictures demonstrating different lighting modes: 2700K for sleeping, 4000K for reading, and 6000K for working.

Figure 5.3: Diversified Lighting Modes

5.4 Remote Control Functions

The remote control allows for convenient operation of the lamp. It requires AAA batteries (not included).

  • Timing: Set a timer for the lamp to turn off automatically.
  • On/Off: Power the lamp on or off.
  • Brightness Increase/Decrease: Adjust light intensity.
  • Color Temperature Increase/Decrease: Fine-tune color temperature.
  • Color Temperature Switch (K): Cycle through preset color temperatures.
  • Scene Modes: Small Night Mode, Reading Mode, Operating Mode, etc.
Image showing the floor lamp with a detailed diagram of the remote control, labeling its various buttons and functions like On/Off, Timing, Brightness, Color Temperature, and Scene Modes.

Figure 5.4: Remote Control Functions

5.5 Timer Setting

Use the timer button on the remote control to set the lamp to turn off after a specified duration, typically 1 hour.

The floor lamp illuminating a bedroom, with a graphic overlay indicating a '1 Hour Timer Setting'.

Figure 5.5: 1 Hour Timer Setting

6. Maintenance

  • Cleaning: Disconnect the power before cleaning. Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Bulb Replacement: Ensure the lamp is unplugged and cool before replacing the bulb. Use an E26 base LED bulb, not exceeding 60W equivalent.
  • Remote Control Batteries: Replace AAA batteries in the remote control when its range or responsiveness decreases.

7. Troubleshooting

ProblemPossible CauseSolution
Lamp does not turn on1. Power cord not plugged in.
2. Bulb is loose or faulty.
3. Power outlet is not working.
4. Remote control batteries are dead.		1. Ensure the power cord is securely plugged into a working outlet.
2. Tighten or replace the bulb.
3. Test the outlet with another device.
4. Replace AAA batteries in the remote control.
Remote control not working1. Batteries are dead or incorrectly inserted.
2. Remote is too far from the lamp.
3. Obstruction between remote and lamp.		1. Replace AAA batteries, ensuring correct polarity.
2. Operate the remote within its effective range.
3. Remove any objects blocking the signal path.
Lamp flickers or dims unexpectedly1. Loose bulb connection.
2. Incompatible bulb.
3. Power fluctuations.		1. Tighten the bulb.
2. Ensure you are using the provided LED bulb or a compatible E26 LED bulb.
3. Check other devices on the same circuit for power issues.

8. Specifications

FeatureDetail
Model NumberSTR-FP-0149
BrandPARTPHONER
Product Dimensions9.2"D x 10.2"W x 66.1"H (Adjustable height: 52'' to 65.32'')
Base Diameter10 Inches
MaterialMetal
Finish TypePainted (Aged Brown)
Shade MaterialMetal
Light Source TypeLED (Bulb Included)
Bulb BaseE26
Wattage8 Watts
Connectivity TechnologyIR (for Remote Control)
Switch TypeRotary Switch, Remote Control
Indoor/Outdoor UsageIndoor
Special FeaturesDimmable, 3 Color Temperatures, 5 Scene Modes, Adjustable Height, Rotatable Shade

9. Warranty and Support

PARTPHONER provides a 24-month quality service for this product. If you encounter any quality issues or require assistance, please do not hesitate to contact us. Our customer support team is committed to resolving any concerns within 24 hours.

You can reach us via the Amazon message box or the email address provided in the original product packaging or documentation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.