VILTROX DC-X2 Camera Field Monitor User Manual

Introduction

Welcome to the VILTROX DC-X2 Camera Field Monitor user manual. This document provides detailed instructions for the proper setup, operation, and maintenance of your new VILTROX DC-X2 monitor. Designed for professional filmmakers and photographers, the DC-X2 offers a high-brightness, high-resolution display with advanced monitoring features to enhance your shooting experience.

Safety Information

Please read and understand all safety precautions before using the VILTROX DC-X2 monitor to prevent damage to the device or injury to yourself.

• Do not expose the monitor to water or excessive humidity.
• Avoid dropping or subjecting the monitor to strong impacts.
• Use only the specified power adapters and batteries.
• Do not attempt to disassemble or repair the monitor yourself. Contact qualified service personnel.
• Keep the monitor away from strong magnetic fields.
• Clean the screen and body with a soft, dry cloth. Avoid using harsh chemicals.

Package Contents

Verify that all items listed below are included in your package:

• 1x VILTROX DC-X2 Camera Field Monitor
• 1x NP-F550 Battery
• 1x Sunshade Hood
• 1x VL-550 Cold Shoe Adapter
• 1x Standard HDMI Cable
• 1x Mini HDMI Cable
• 1x USB Type-C Cable
• 1x Carry Case
• 1x Custom Screen Protectors
• 1x User Manual
• 1x Packing Box

Image: VILTROX DC-X2 Camera Field Monitor and its included accessories, such as the sunshade, battery, cold shoe adapter, and various cables.

Product Overview

Display Features

The VILTROX DC-X2 features a 6-inch IPS touch screen with a resolution of 1920x1080, offering a wide 160° viewing angle and a 1000:1 contrast ratio. Its ultra-bright 2000 nits display ensures clear visibility even in direct sunlight, making it ideal for outdoor shooting.

Image: The VILTROX DC-X2 monitor showcasing its 6-inch IPS FHD display with key specifications like 2000 Nits brightness, 160° wide view angle, SRGB/REC-709 color calibration, 4K 1920x1080 resolution, 60Hz refresh rate, and 1000:1 high contrast.

Image: A visual comparison demonstrating the superior visibility of the 2000 Nits ultra-high brightness screen of the DC-X2 compared to a standard 400 Nits screen, especially in bright conditions.

Ports and Controls

The monitor is equipped with various ports for connectivity and multiple control options for ease of use.

• HDMI Input/Output: Supports up to 4K@30Hz signals (3840x2160p, 4096x2160p at 24/25/30Hz).
• USB-A Port: For importing 3D LUTs and firmware upgrades.
• Type-C Port: For power input (≥ 9V/3A).
• DC In: For external power input (12-18V/2A).
• 3.5mm Headphone Jack: For audio monitoring.
• Touch Screen: Intuitive UI for quick menu navigation and setting adjustments.
• Shortcut Keys (F1-F4): Four customizable function buttons for quick access to frequently used features.

Image: A close-up view of the VILTROX DC-X2 monitor connected to a camera rig, highlighting the 4K HDMI input and loop-out capabilities, along with supported resolutions and refresh rates.

Image: A user operating the VILTROX DC-X2 monitor via its full touch screen interface, alongside an inset showing the convenient F1-F4 shortcut keys for quick function access.

Image: A comprehensive diagram illustrating all ports and buttons on the VILTROX DC-X2 monitor, including Back/Menu Button, Shortcut Keys, Display Screen, Fan Exhaust Vent, Indicator Light, Power Button, HDMI Input/Output, Headphone Jack, Cooling Air Intake, 1/4 Screw Hole, DC Port, Type-C Port, USB Interface, and Battery Slot.

Setup

1. Powering the Monitor

The DC-X2 monitor supports multiple power options:

• NP-F Series Battery: Insert a compatible NP-F series lithium battery (e.g., NP-F550, NP-F750, NP-F970) into the battery slot on the back of the monitor.
• DC Adapter: Connect a 12-18V/2A DC power adapter to the DC IN port.
• Type-C Power Bank: Connect a Type-C power source with a voltage of ≥ 9V and current of 3A to the Type-C port.

Image: Illustrations detailing the multiple power supply options for the VILTROX DC-X2 monitor, including the NP-F series battery slot, DC adapter input, and Type-C power bank connection.

2. Connecting to a Camera

1. Ensure both the monitor and your camera are powered off.
2. Connect one end of the HDMI cable (Standard or Mini HDMI, depending on your camera) to the HDMI OUT port on your camera.
3. Connect the other end of the HDMI cable to the HDMI IN port on the VILTROX DC-X2 monitor.
4. If you wish to loop out the signal to another monitor, connect an HDMI cable from the HDMI OUT port on the DC-X2 to the input of the second monitor.

3. Mounting the Monitor

Attach the monitor to your camera rig or stand using the included VL-550 Cold Shoe Adapter or any standard 1/4-inch screw mount. Ensure the monitor is securely fastened before use.

Operating Instructions

1. Basic Operation

• Power On/Off: Press and hold the power button on the side of the monitor to turn it on or off.
• Indicator Light: The indicator light will illuminate when the monitor is powered on.

2. Touch Screen Control

The DC-X2 features an intuitive touch screen interface for easy navigation and control:

• Single Tap: Tap on icons or menu options to select them.
• Swipe: Swipe left/right or up/down to navigate through menus or adjust values.
• Double Tap: Double tap the screen to quickly access the main menu.
• Pinch-to-Zoom: Use two fingers to pinch in or out to zoom the image.

Image: A series of illustrations demonstrating various touch screen gestures for controlling the VILTROX DC-X2 monitor, including double-tap for main menu, single tap for exit menu, and swipe gestures for volume, backlight, zoom in, and zoom out.

3. Shortcut Keys (F1-F4)

The four customizable shortcut keys (F1-F4) allow for quick access to frequently used functions. You can assign up to 22 different functions to these keys via the menu settings.

• Default F1: Full Waveform switch.
• Default F2: False Color switch.
• Default F3: 3D LUT switch.
• Default F4: Screen Lock switch.

Image: A close-up view of the VILTROX DC-X2 monitor's side, highlighting the customizable F1-F4 shortcut keys and their default functions, along with the option to assign up to 22 different functions.

4. Professional Monitoring Functions

The DC-X2 offers a comprehensive suite of professional monitoring tools:

• Waveform Parade: Displays the luminance and chrominance levels of your video signal.
• Oscillogram (RGB/YUV/Y): Provides detailed analysis of video signal components.
• Vector Graph: Shows the color saturation and hue of the video signal.
• Luminance Histogram: Visualizes the distribution of brightness levels.
• Focus Assist (Peaking): Highlights in-focus areas for precise focusing.
• Audio Column: Displays audio levels.
• Image Flip: Flips the image horizontally or vertically.
• False Color: Helps evaluate exposure levels.
• 3D LUTs: Apply custom Look-Up Tables for real-time color grading preview.
• Color Space: Adjust color space settings.
• Safe Area: Displays safe zones for broadcast.
• Mark Ratio: Displays various aspect ratio markers.
• Zoom: Magnify parts of the image for detailed inspection.
• Gridlines: Overlay gridlines for composition.
• Color Temperature: Adjust color temperature settings.
• Pixel to Pixel: Displays the image at native resolution.

Image: The VILTROX DC-X2 monitor displaying its professional monitoring functions, including 3D LUT, Color Space, Audio Column, Safe Area, Mark Ratio, Image Flip, Full Waveform, Zoom, Gridlines, Color Temperature, False Color, Focus Peaking, Exposure, Histogram, Vectorscope, and Pixel to Pixel.

5. Custom 3D LUTs

The DC-X2 allows you to import custom 3D LUTs to preview different color effects directly on the monitor. This is particularly useful for working with log footage from your camera.

1. Save your .cube or .dat 3D LUT files onto a USB flash drive.
2. Insert the USB flash drive into the USB-A port on the monitor.
3. Navigate to the 3D LUT menu option and select 'Import'.
4. Choose the desired LUT file from the USB drive to import it to the monitor.
5. Once imported, you can apply the LUT to your video feed for real-time preview.

Image: A user's finger interacting with the VILTROX DC-X2 monitor screen, showing the interface for importing 3D LUTs via the USB-A port, with a comparison of original and 3D LUT applied images.

Maintenance

• Cleaning: Use a soft, lint-free cloth to gently wipe the screen and body. For stubborn smudges, slightly dampen the cloth with water or a screen-safe cleaning solution. Do not spray liquid directly onto the monitor.
• Storage: When not in use, store the monitor in its carry case in a cool, dry place, away from direct sunlight and extreme temperatures.
• Battery Care: If using NP-F batteries, follow the manufacturer's guidelines for charging and storage to prolong battery life. Remove batteries if the monitor will not be used for an extended period.

Troubleshooting

If you encounter issues with your VILTROX DC-X2 monitor, refer to the table below for common problems and their solutions.

Specifications

Warranty and Support

VILTROX products come with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please visit the official VILTROX website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Official VILTROX Store: VILTROX Amazon Store