Important Safety Information
Please read and understand this entire owner's manual, including all safety information, before plugging in or using this product. Failure to do so could result in fire, electric shock, or serious personal injury.
- Always place the heater on a firm, level surface.
- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater.
- Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.
- This heater is safe for use around children and pets, but supervision is always recommended.
Product Overview
The Duraflame Electric Fireplace Portable Space Heater (Model DFS-22004-TPB01) provides supplemental zone heating for areas up to 400 square feet. It features a realistic flame effect that can be operated with or without heat, offering year-round ambiance. The unit is designed for portability and ease of use.


Setup Instructions
This Duraflame Electric Fireplace Portable Space Heater arrives fully assembled and ready to use. The legs are optional and can be attached or removed to customize the unit's style.
Attaching/Removing Legs (Optional)
- Carefully turn the heater upside down on a soft, non-abrasive surface to avoid scratching.
- Align each leg with the designated slots on the bottom of the heater.
- Snap each leg firmly into place. Secure each leg with the provided screws using a screwdriver.
- To remove the legs, reverse the steps.


Operating Instructions
The control panel for the heater is located behind the front door. Open the door to access the controls.

Controls:
- Temperature Control Dial: Adjusts the heat output. Turn clockwise for higher heat, counter-clockwise for lower heat.
- Heat Settings Switches: Two switches for low (750W) and high (1500W) heat. Use one for low heat, both for high heat.
- Flame Effect On/Off Switch: Activates or deactivates the realistic flame effect. The flame effect can be used independently of the heat function.
- Flame Brightness Dial: Adjusts the intensity of the flame effect.
To operate the heater, ensure it is plugged into a grounded 120V AC outlet. Open the front door, select your desired heat setting, and turn on the flame effect if desired. Close the door after adjusting settings.
This video provides a visual demonstration of the Duraflame Electric Fireplace Portable Space Heater, highlighting its flame effect and control panel operation.
Maintenance
Regular maintenance ensures optimal performance and longevity of your heater.
- Cleaning: Disconnect power before cleaning. Clean the trim using a soft cloth, slightly dampened with a citrus oil-based product, and buff with a clean, soft cloth. Do not use abrasive cleaners or sprays.
- Dust Removal: Periodically vacuum or wipe dust from the air intake and exhaust vents to maintain proper airflow.
Troubleshooting
If you experience issues with your heater, consult the following common troubleshooting steps:
- No Power: Ensure the power cord is securely plugged into a grounded outlet. Check your household circuit breaker.
- No Heat: Verify that the heat switches are turned on and the temperature control dial is set to a desired heat level.
- Flame Effect Not Working: Check if the flame effect switch is turned on.
- Overheating: The heater is equipped with an overheat protection device. If it overheats, it will automatically shut off. Unplug the unit, wait 10-15 minutes for it to cool down, and clear any obstructions from the air vents before plugging it back in.
If problems persist, contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Duraflame |
| Model Name | duraflame Electric Fireplace Space Heater |
| Model Number | DFS-22004-TPB01 |
| Power Source | Corded Electric |
| Product Dimensions (with legs) | 7.7"D x 14"W x 14.2"H |
| Product Dimensions (without legs) | 7.7"D x 14"W x 12"H (approximate, derived from images) |
| Material | Medium Density Fibreboard (MDF) |
| Finish Type | Powder Coated |
| Installation Type | Freestanding |
| Heat Output | 4600 British Thermal Units |
| Special Features | Flame Effect, Portable, Removable Legs |
| Color | Black |
| Heating Coverage | 400 sq. ft. |
| Item Weight | 14.43 Pounds |
| Manufacturer | Twin-Star International, Inc. |
| UPC | 611768004140 |
Warranty Information
This Duraflame Electric Fireplace Portable Space Heater comes with a 1 Year Limited Manufacturer Warranty. Please retain your proof of purchase for warranty claims. For specific details regarding warranty coverage and terms, refer to the documentation included with your product or contact the manufacturer directly.
Customer Support
For further assistance, technical support, or inquiries regarding your Duraflame Electric Fireplace Portable Space Heater, please contact the manufacturer:
- Manufacturer: Twin-Star International, Inc.
- (Specific contact details such as phone number or website are not provided in the product data. Please refer to your product packaging or the manufacturer's official website for direct contact information.)







