JELLYPIG Pure 01 Cordless Vacuum Cleaner User Manual

1. Introduction

Thank you for choosing the JELLYPIG Pure 01 Cordless Vacuum Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read this manual thoroughly before first use and keep it for future reference.

2. Safety Instructions

To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using an electrical appliance.

• Read all instructions before using the appliance.
• Do not use outdoors or on wet surfaces.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer's recommended attachments.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up toxic material, such as chlorine bleach, ammonia, or drain cleaner.
• Do not use without dust cup and/or filters in place.
• Prevent unintentional starting. Ensure the switch is in the off-position before picking up or carrying the appliance.
• Recharge only with the charger specified by the manufacturer.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, seek medical help.

3. Package Contents

Please check the package contents to ensure all items are present and in good condition:

• Main Unit (Motor & Dust Cup Assembly)
• Extension Wand
• Motorized Floor Brush with LED Lights
• Crevice Tool
• 2-in-1 Brush Attachment
• Wall Mount Bracket
• Power Adapter
• HEPA Filter (pre-installed)
• Sponge Filter (pre-installed)

Image: JELLYPIG Pure 01 Cordless Vacuum Cleaner and its various components and accessories, including the main unit, extension wand, floor brush, crevice tool, brush attachment, and filters.

4. Product Overview

Familiarize yourself with the main parts of your JELLYPIG Pure 01 Cordless Vacuum Cleaner:

• Main Unit: Contains the motor, dust cup, and control panel.
• LED Display: Shows battery level, suction mode (MIN, MID, MAX), and error indicators.
• Power Button: Turns the vacuum on/off.
• Mode Button: Cycles through suction power settings.
• Dust Cup: Collects dirt and debris, with a 1.5L capacity and one-click clear function.
• Filtration System: Features a 7-layer filtration system with a HEPA filter and built-in aromatherapy tablet slot.
• Motorized Floor Brush: Equipped with LED lights for improved visibility and a V-shaped anti-tangle design.

Image: A close-up view of the JELLYPIG Pure 01's all-in-one LED display, showing battery percentage, suction mode indicators (MIN, MID, MAX), and other status icons.

Image: An exploded view illustrating the V-shaped anti-tangle floor brush design with its anti-tangling comb, designed to prevent hair and debris from wrapping around the brush roll.

Image: A detailed diagram showcasing the 7-layer filtration system of the vacuum cleaner, highlighting the various filter components and the airflow path, including a slot for an aromatherapy tablet.

5. Setup

5.1 Assembly

1. Attach the Extension Wand: Insert the top end of the extension wand into the main unit until it clicks into place.
2. Attach the Floor Brush: Insert the bottom end of the extension wand into the motorized floor brush until it clicks into place.
3. Attach Accessories: For handheld use, attach the crevice tool or 2-in-1 brush attachment directly to the main unit.

5.2 Charging the Battery

Before first use, fully charge the vacuum cleaner for approximately 4-5 hours.

1. Connect the power adapter to the charging port on the main unit.
2. Plug the power adapter into a wall outlet.
3. The LED display will show the charging status. A full charge is indicated by 100% on the display.

5.3 Wall Mount Installation (Optional)

The wall mount provides a convenient storage and charging solution.

1. Choose a suitable location near a power outlet.
2. Mark the drilling points on the wall using the wall mount bracket as a template.
3. Drill holes and insert wall anchors (if necessary).
4. Secure the wall mount bracket to the wall with screws.
5. Hang the vacuum cleaner on the wall mount.

6. Operating Instructions

6.1 Powering On/Off

• To turn on: Press the Power Button once. The vacuum will start in the default suction mode.
• To turn off: Press the Power Button again.

6.2 Changing Suction Modes

The JELLYPIG Pure 01 offers three suction modes: MIN, MID, and MAX.

• While the vacuum is on, press the Mode Button to cycle through the suction settings.
• The current mode will be displayed on the LED screen.
• Use MIN for light cleaning and extended runtime, MID for daily cleaning, and MAX for stubborn dirt and deep cleaning.

6.3 Using Attachments

• Motorized Floor Brush: Ideal for all floor types, including hard floors and low-pile carpets. The LED lights illuminate dust and debris.
• Crevice Tool: Perfect for narrow gaps, corners, and hard-to-reach areas like between sofa cushions or car seats.
• 2-in-1 Brush Attachment: Use the brush bristles for delicate surfaces like keyboards, curtains, or upholstery, and retract the bristles for wider suction on flat surfaces.

Image: The JELLYPIG Pure 01 Cordless Vacuum Cleaner being used on a hard floor, demonstrating its strong suction power to pick up various debris, with a dog observing nearby.

Image: The JELLYPIG Pure 01 Cordless Vacuum Cleaner being used in different configurations and environments, showcasing its versatility for cleaning floors, reaching high areas, and cleaning furniture, with an indicator of up to 60 minutes runtime.

7. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your vacuum cleaner.

7.1 Emptying the Dust Cup

Empty the dust cup after each use or when the MAX fill line is reached.

1. Hold the main unit over a trash bin.
2. Press the dust cup release button (usually located near the bottom of the dust cup) to open the bottom flap and release the contents.
3. Close the flap securely after emptying.

Image: An illustration demonstrating the one-click mechanism for emptying the 1.5L dust cup of the JELLYPIG Pure 01 Cordless Vacuum Cleaner directly into a waste bin.

7.2 Cleaning Filters

The HEPA filter and sponge filter should be cleaned regularly (monthly or as needed) to maintain suction power.

1. Twist and pull to remove the dust cup from the main unit.
2. Remove the HEPA filter and sponge filter from the dust cup assembly.
3. Tap off loose dirt. Rinse the filters under cold running water until the water runs clear.
4. Allow filters to air dry completely for at least 24 hours before reinserting them. Do not use a hairdryer or other heating devices.
5. Reassemble the filters and dust cup, ensuring they are securely in place.

7.3 Cleaning the Brush Roll

Periodically check the motorized floor brush for tangled hair or debris.

1. Turn off the vacuum and disconnect the floor brush from the extension wand.
2. Locate the brush roll release tab/lock on the side of the floor brush. Unlock and remove the brush roll.
3. Use scissors or a cleaning tool to cut and remove any tangled hair or fibers from the brush roll.
4. Clean any debris from the brush roll housing.
5. Reinsert the brush roll and lock it into place.

7.4 Battery Care

• Always fully charge the battery before first use.
• Do not store the vacuum with a completely depleted battery for extended periods.
• If not using the vacuum for a long time, charge it every 3 months to maintain battery health.

8. Troubleshooting

If you encounter issues with your JELLYPIG Pure 01, refer to the following common problems and solutions:

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the warranty card included with your product or contact JELLYPIG customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, please visit the official JELLYPIG website or contact the seller from whom you purchased the product.