Ecarke 2-in-1 Battery Charger and Power Inverter

1. Introduction

The Ecarke 2-in-1 Battery Charger and Power Inverter is a versatile device designed to extend the utility of your DeWALT 20V lithium-ion batteries. It functions both as a charger for your DeWALT batteries via its Type-C port and as a portable power source to charge various electronic devices through its USB-A and Type-C outputs. Additionally, it features a built-in LED light for illumination.

2. Product Features

• Dual Functionality: Serves as both a charger for DeWALT 20V batteries and a power inverter for external devices.
• Wide Compatibility: Compatible with DeWALT 20V Lithium-ion Batteries including DCB206, DCB205, DCB204, DCB181, DCB182, DCB200, DCB203, DCB205-2, DCB204-2, DCB206-2, and more.
• High Power Output: Features a 100W USB-A output and a bidirectional USB-C port for charging and power delivery.
• LCD Display: A clear LCD screen shows real-time battery levels (1% to 100%), charging status, discharging status, and fault indicators.
• Integrated LED Light: Equipped with a 300 Lumens LED light, providing illumination for various tasks.
• Safety Protections: Built-in safeguards against short circuit, overcurrent, overvoltage, low voltage, overload, and overtemperature.
• Portable Design: Compact and lightweight, making it suitable for outdoor use, job sites, and travel.

Image 2.1: Functional description of the Ecarke 2-in-1 Battery Charger and Power Inverter, highlighting its components and LCD display indicators.

3. Setup

To begin using your Ecarke 2-in-1 Battery Charger and Power Inverter, ensure you have a compatible DeWALT 20V lithium-ion battery (not included).

1. Attach Battery: Slide your DeWALT 20V battery onto the adapter until it clicks securely into place. Ensure a firm connection.
2. Detach Battery: To remove the battery, press the release button(s) on the battery or adapter and slide the battery off.

Important Note:

• Batteries and charging cables are not included with this adapter.
• Remove the battery from the adapter when not in use to prevent power drain.

Image 3.1: Illustration of the Ecarke adapter connected to a DeWALT 20V battery, indicating compatibility with various DeWALT battery models.

4. Operating Instructions

4.1 Charging the DeWALT Battery (Reverse Charging)

The Type-C port on the Ecarke adapter allows for reverse charging of your DeWALT 18V/20V lithium-ion battery.

1. Connect a Type-C charging cable to the Type-C port on the adapter.
2. Connect the other end of the Type-C cable to a power source (e.g., wall adapter, power bank).
3. For fast charging, it is recommended to use a power adapter with a rating of 30W or higher.

4.2 Using as a Power Inverter (Charging External Devices)

The adapter can power or charge various personal devices via its USB-A and Type-C output ports.

1. Ensure a charged DeWALT 20V battery is securely attached to the adapter.
2. Connect your device (e.g., mobile phone, laptop, tablet) to the USB-A or Type-C output port using an appropriate cable.
3. The adapter will automatically begin supplying power to your device.

Important Tip for Charging External Devices:

When using the Type-C port to charge an external device, ensure the DeWALT battery is attached to the adapter first. If your external device (e.g., some smartphones) is configured to supply power, connecting it before the battery might cause the adapter to attempt to charge the DeWALT battery from your phone, rather than the other way around.

Image 4.1: The Ecarke adapter charging a laptop and a smartphone simultaneously, demonstrating its power inverter capabilities.

Image 4.2: Examples of devices that can be powered by the 100W output of the Ecarke adapter.

4.3 Using the LED Light

The adapter includes a built-in LED light for illumination.

1. Press the dedicated Light Button to turn the LED light on.
2. Press the Light Button repeatedly to cycle through different brightness levels or modes (if applicable).
3. Press and hold the Light Button to turn the LED light off.

4.4 Understanding the LCD Display

The LCD screen provides important operational information:

• Battery Percentage: Displays the remaining battery charge from 1% to 100%.
• Green Light Indicator: Indicates battery level, charging status, or fast charging.
• Yellow Light Indicator: Signals discharging status.
• Red Light Indicator: Indicates a fault or error condition.

5. Safety Information

To ensure safe operation and prolong the life of your device and batteries, please observe the following safety guidelines:

• Do not expose the adapter to rain or wet conditions.
• Do not operate the adapter if it has received a sharp blow, been dropped, or damaged in any way.
• Always remove the battery from the adapter when not in use to prevent over-discharge and potential damage to the battery.
• The adapter has built-in safety protections (short circuit, overcurrent, overvoltage, low voltage, overload, overtemperature). If a fault is detected, the Red Light Indicator will illuminate, and the unit may stop functioning.
• The adapter will stop working if the battery voltage drops below 15V to prevent over-discharge.
• Use only compatible DeWALT 20V lithium-ion batteries.
• Do not attempt to disassemble or modify the adapter.
• Store the adapter in a dry, cool place away from direct sunlight.

6. Maintenance

The Ecarke 2-in-1 Battery Charger and Power Inverter requires minimal maintenance.

• Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Storage: When not in use for extended periods, remove the battery and store the adapter in a dry, cool environment.
• Inspection: Periodically check the ports and battery connection for any signs of damage or debris.

7. Troubleshooting

8. Specifications

Image 8.1: Estimated charging times for various DeWALT 20V battery capacities using different power chargers.

9. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact Ecarke customer service directly. Keep your purchase receipt for warranty claims.