1. Product Overview
The Beatbot iSkim Ultra is an intelligent robotic pool skimmer designed to efficiently clean your pool's surface. It features solar power, app control, advanced navigation, and a robust debris collection system.
Image: The Beatbot iSkim Ultra robotic pool skimmer in a pool, demonstrating its surface cleaning capability.
2. Setup
2.1 Initial Placement and Charging
Before first use, ensure the iSkim Ultra is fully charged. The device offers dual charging options: solar power and magnetic wireless charging.
- Solar Charging: Place the iSkim Ultra in direct sunlight on the pool surface. The integrated 24W solar panel will charge the 10,000mAh battery. SolarTrack technology optimizes charging by seeking brighter areas.
- Magnetic Wireless Charging: For faster charging or during low sunlight conditions, use the provided magnetic charger. Connect the charger to a power outlet and attach it to the designated port on the skimmer. A full charge takes approximately 5 hours.
Image: The Beatbot iSkim Ultra demonstrating its dual charging capabilities: solar charging while floating and magnetic wireless charging when removed from the pool.
2.2 App Connection and Control
The iSkim Ultra connects to a mobile application for advanced control and monitoring. The device supports WiFi (2.4G only) and Bluetooth dual connectivity for stable signal and extended range.
- Download the Beatbot app from your device's app store.
- Follow the in-app instructions to pair your iSkim Ultra.
- Once connected, you can control navigation, adjust speed, schedule cleaning, and monitor water temperature and cleaning status.
Image: A smartphone displaying the Beatbot app interface, highlighting WiFi and Bluetooth connectivity for remote control.
2.3 Initial Operation
After charging and connecting to the app, place the iSkim Ultra gently into the pool. The device will initiate its smart navigation system, utilizing 20 high-precision sensors and tri-ultrasonic technology for optimized pathfinding and obstacle avoidance.
Image: A visual representation of the iSkim Ultra's intelligent navigation system, illustrating its S-Path optimization and use of ultrasonic sensors for efficient pool coverage.
3. Operating Instructions
3.1 Cleaning Modes and Scheduling
The iSkim Ultra provides continuous 24/7 cleaning. You can schedule cleaning cycles through the Beatbot app. The device uses a 7-motor system for propulsion and precise cleaning, including dual-side brushes for edges and corners, and an extra-large front roller brush for wider coverage.
Image: The Beatbot iSkim Ultra actively cleaning a pool surface, demonstrating its ability to clear floating debris.
3.2 ClearWater Clarification System
The integrated ClearWater system automatically dispenses a clarifying solution to prevent scum buildup and water discoloration, contributing to crystal-clear pool water.
Image: An illustration of the ClearWater Clarification System, showing the automatic dispensing of clarifying agent into the pool water.
3.3 Remote Control and Monitoring
Use the Beatbot app to remotely control the skimmer, including manual navigation and speed boost. The app also provides real-time updates on cleaning status, water temperature, and environmental temperature.
Image: A smartphone displaying the Beatbot app's remote control interface, allowing users to manually navigate the skimmer.
3.4 Automatic Parking and Retrieval
Upon completion of a cleaning cycle, the iSkim Ultra will autonomously park itself poolside. For immediate retrieval, use the one-click parking function in the app.
Image: The Beatbot iSkim Ultra robotically parking itself at the edge of the pool after completing its cleaning cycle.
4. Maintenance
4.1 Filter Basket Cleaning
The iSkim Ultra features a large 9L filter basket with an anti-spill hatch. Regular emptying of the filter basket is crucial for optimal performance.
- To empty, press the release mechanism, open the top, and dispose of collected debris.
- Rinse the basket with water to remove any remaining fine particles.
Image: A person demonstrating the removal of the extra-large 9L filter basket from the Beatbot iSkim Ultra for cleaning.
4.2 General Care
The iSkim Ultra is constructed from chemical and UV-resistant ASA materials for durability. Basic maintenance includes:
- Wiping down the exterior with a soft cloth as needed.
- Ensuring the charging contacts are clean.
- Proper storage during off-season periods.
5. Troubleshooting
5.1 Obstacle Avoidance and Entanglement
The iSkim Ultra is equipped with advanced sensors for obstacle avoidance. In case of entanglement, the device is designed to automatically turn or back up to free itself.
Image: The Beatbot iSkim Ultra navigating away from an obstacle, illustrating its entanglement escape feature.
5.2 Preventing Skimmer Entrapment
To prevent the iSkim Ultra from getting stuck in pool skimmer openings, consider the following solutions:
- Solution 1: Place a foam pool noodle in an arc at the skimmer entrance.
- Solution 2: Cut a circular foam piece to fit the skimmer's dimensions and place it inside.
- Solution 3: Position a chlorine tablet holder in front of the skimmer opening.
Image: Visual guide showing three methods to prevent the Beatbot iSkim Ultra from becoming trapped in a pool skimmer opening.
5.3 Anti-Stranding Bars
The robot features adjustable built-in anti-stranding bars to prevent it from getting stuck on shallow stairs or other pool structures. There are 4 bars in total.
- To deploy: Pull down the anti-stranding bars. Adjust them simultaneously to keep the robot balanced.
- To retract: Push up on the bars until they securely lock into place.
Important Tips:
- If there is a rope floating in the pool, do not use anti-stranding bars to prevent entanglement.
- Always retract the anti-stranding bars when moving the robot.
Image: A diagram illustrating the deployment and retraction of the anti-stranding bars on the iSkim Ultra.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | Beatbot |
| Model Name | iSkim Ultra |
| Material | Acrylonitrile Butadiene Styrene (ABS), Polypropylene, or ASA |
| Color | Ice Blue |
| Product Dimensions (L x W x H) | 18" x 17" x 9" |
| Item Weight | 17 pounds |
| Power Source | Solar-Powered & Battery Powered |
| Battery Type | Lithium-Ion (1 included) |
| Battery Energy Content | 67.68 watt-hours |
| Filter Basket Capacity | 9 liters |
| Control Method | App |
| Special Features | 20 Sensors, 7 Motors, 24W Solar Panel, 10,000 mAh Battery, Water Clarification System, Dual Charging, Dual-Side Brushes, S-Path Optimization, Voice Broadcast |
7. Warranty
The Beatbot iSkim Ultra comes with a limited warranty. Please refer to the product packaging or the official Beatbot website for specific warranty terms and conditions.
8. Support
For further assistance, including anti-stuck foam and installation instructions, please contact Beatbot customer service. The device also supports Over-The-Air (OTA) updates to ensure peak performance and access to the latest features.
Image: A smartphone displaying an Over-The-Air (OTA) update screen, indicating the iSkim Ultra's ability to receive performance enhancements.
8.1 Helpful Video: Attaching Accessories
Video: This video from Beatbot Tech provides a tip for attaching a pool dispenser or thermometer to the iSkim Ultra.
