1. Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your KAFF KET 60B-DC 60cm BLDC Autoclean T-Shape Chimney. Please read these instructions carefully before using the appliance and retain them for future reference.
Image 1.1: Front view of the KAFF KET 60B-DC Chimney, showcasing its sleek design and control panel.
2. Safety Instructions
To prevent injury or damage, always adhere to the following safety precautions:
- Ensure the power supply matches the voltage specified on the appliance rating label.
- Installation must be performed by a qualified technician in accordance with local regulations.
- Do not operate the chimney without the oil collector properly installed.
- Never flambé under the range hood.
- Regularly clean the oil collector to prevent grease buildup, which can be a fire hazard.
- Keep children away from the appliance during operation and cleaning.
- Disconnect the power supply before any maintenance or cleaning.
3. Product Overview
3.1 Key Features
- BLDC Motor: Ensures quiet, energy-efficient, and powerful operation.
- Dry Heat Auto Clean Technology: Simplifies maintenance by dislodging grease into the oil collector.
- Filterless Design: Eliminates the need for traditional filters, reducing maintenance.
- 9-Speed Touch & Gesture Control: Offers precise control over suction power with intuitive touch and hand gestures.
- LED Lighting: Provides bright and energy-efficient illumination for your cooking area.
- T-Shape Canopy Design: Modern aesthetic suitable for contemporary kitchens.
Image 3.1: Illustration highlighting the efficient BLDC motor, a core component for powerful and quiet operation.
Image 3.2: Close-up of the sleek touch panel, demonstrating the 9-speed gesture control functionality.
3.2 Included Components
Upon unpacking, verify that all components are present:
- 1x KAFF KET 60B-DC Kitchen Chimney
- 1x Kitchen Chimney Exhaust Duct Pipe
- 1x User Manual
- 1x Warranty Card
- 1x Wall Mounting Bracket
- Screws and Rawl Plugs for installation
4. Setup & Installation
The KAFF KET 60B-DC chimney is designed for wall-mounted installation. Professional installation is highly recommended to ensure proper functioning and safety.
4.1 Pre-Installation Checks
- Ensure adequate space above the cooking hob, typically 65-75 cm, as per local safety standards.
- Verify the wall structure can support the weight of the chimney.
- Confirm availability of a suitable power outlet within reach.
- Plan the ducting route for efficient exhaust of air.
4.2 Installation Steps (Summary)
- Mark drilling points on the wall according to the mounting bracket.
- Drill holes and insert rawl plugs. Secure the mounting bracket.
- Mount the chimney body onto the bracket.
- Connect the exhaust duct pipe to the chimney outlet and route it to the exterior.
- Install the oil collector.
- Connect the chimney to the power supply.
Image 4.1: Dimensional diagram of the chimney, showing key measurements for installation planning.
5. Operating Instructions
Your KAFF KET 60B-DC chimney features intuitive touch and gesture controls for ease of use.
5.1 Power On/Off
- Touch Control: Press the power symbol on the control panel to turn the chimney on or off.
- Gesture Control: Wave your hand from left to right in front of the sensor to turn on, and right to left to turn off.
5.2 Adjusting Suction Speed
The chimney offers 9 speed settings to suit various cooking needs.
- Touch Control: Use the '+' and '-' buttons on the control panel to increase or decrease the fan speed.
- Gesture Control: Wave your hand from left to right (or right to left) repeatedly to cycle through the speed settings. The display will indicate the current speed.
Image 5.1: Visual representation of the powerful air extraction, demonstrating effective smoke and odor removal.
5.3 LED Lighting
Press the light symbol on the control panel to turn the LED lights on or off, illuminating your cooking area.
Image 5.2: The energy-saving frosted LED light provides clear illumination for the cooking surface.
6. Maintenance & Cleaning
Regular maintenance ensures optimal performance and longevity of your chimney.
6.1 Dry Heat Auto Clean Function
The auto-clean function uses dry heat to melt and collect grease. It is recommended to run this cycle periodically, depending on your cooking frequency.
- Ensure the chimney is off and cool.
- Press the 'Auto Clean' button on the control panel. The cycle will run for a preset duration.
- After the cycle, allow the chimney to cool completely before proceeding to clean the oil collector.
6.2 Cleaning the Oil Collector
The oil collector accumulates grease and must be emptied and cleaned regularly.
- Disconnect the chimney from the power supply.
- Carefully remove the oil collector from its housing.
- Empty the collected oil and wash the collector with warm, soapy water. Rinse thoroughly and dry completely.
- Reinstall the dry oil collector securely.
Image 6.1: The matte black vent and easily removable oil collector, designed for convenient cleaning.
6.3 Exterior Cleaning
Wipe the exterior surfaces with a soft cloth dampened with mild detergent. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
7. Troubleshooting
Refer to the table below for common issues and their potential solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Chimney does not turn on | No power supply | Check power cord connection and circuit breaker. |
| Low suction power | Oil collector full or dirty | Clean the oil collector. |
| Excessive noise during operation | Loose components or obstruction in fan | Ensure all parts are secure. Contact service if noise persists. |
| Gesture control not responding | Sensor obstructed or dirty | Clean the sensor area. Ensure proper hand movement. |
Image 7.1: The chimney operates with a low noise level, contributing to a quieter kitchen environment.
If the problem persists after attempting these solutions, please contact KAFF customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Model | KET60B-DC |
| Air Flow Capacity | 1400 Cubic Meters Per Hour (CMPH) |
| Material | Stainless Steel |
| Noise Level | 54 Decibels |
| Mounting Type | Wall Mount |
| Controls Type | Touch & Gesture Control |
| Voltage | 220 Volts |
| Number of Speeds | 9 |
| Item Weight | 16.5 kg |
| Light Source Type | LED |
| Filter Type | Filterless |
| Item Form | T-Shape Canopy |
| Ventilation Type | Ducted |
| Annual Energy Consumption | 20 Kilowatt Hours |
| Product Dimensions (LxWxH) | 50D x 60W x 56H Centimeters |
| Special Features | Auto Clean, Built-In Oil Collector, LED Lighting, Noise Reduction, Stain Resistant |
9. Warranty & Support
9.1 Warranty Information
Your KAFF KET 60B-DC Chimney comes with:
- 2 Years Comprehensive Warranty on the product.
- Lifetime (10 Years) Warranty on the motor.
Please retain your purchase receipt and warranty card for any warranty claims. The warranty covers manufacturing defects under normal use conditions.
9.2 Customer Support
For technical assistance, service requests, or warranty inquiries, please contact KAFF customer care:
- Toll-Free Number: 1800180222
- Email: customercare@kaff.in