Hatteker RFC-656
Hatteker Hair Clippers and Trimmers Set
User Instruction Manual
Model: RFC-656 | Brand: Hatteker
Product Overview
The Hatteker Professional Hair Clippers and Trimmers Set is designed for both professional and home use, offering precision and versatility for various hair cutting and trimming needs. This comprehensive kit includes a powerful barber clipper and a precise T-blade hair trimmer, along with a range of accessories to ensure a complete grooming experience.

Image: Complete Hatteker Hair Clippers and Trimmers Set, including both clipper and trimmer units, various guide combs, charging cables, cleaning brush, lubricant oil, and a grooming apron.
Key Features:
- Professional Hair Clippers and Trimmers Set: Includes a powerful barber clipper with adjustable taper lever (0.5/1/1.5/2/2.5mm) and 10 guide combs, plus a hair trimmer with a T-shaped blade and 4 detail trimmer guide combs.
- Sharp & Safe Titanium Coated Blade: Self-sharpening titanium-coated blades ensure effortless cutting without pulling or skin irritation. The R-shaped corner design enhances safety.
- LCD Display & Large Battery Capacity: Both units feature digital displays for battery status. The clipper offers 150 minutes of cordless use, and the trimmer also provides 150 minutes, powered by integrated lithium-ion batteries.
- Low Noise & Powerful Motor: Equipped with a heavy-duty motor for smooth, quiet operation, suitable for all hair types, including children's haircuts.
- Streamlined Design: Ergonomically designed for comfortable grip and lightweight handling.
Important Safety Information
To ensure safe operation and prevent injury or damage, please read and adhere to the following safety guidelines:
- If the hair clippers are damaged, immediately stop using them. Contact the manufacturer for repair or replace the unit.
- Keep the appliance dry. Do not use it in wet conditions or immerse it in water.
- Do not disassemble the appliance. For repairs, contact qualified service personnel.
- Keep out of reach of children.
- Use only the charging cables and accessories provided by the manufacturer.
- Ensure the power adapter is compatible with your local power supply.
- Avoid placing the appliance near heat sources or in direct sunlight.
Setup Guide
1. Initial Charging:
Before first use, fully charge both the hair clipper and the trimmer. Connect the provided USB cables to each device and a suitable USB power adapter (not included). The LCD display will indicate charging progress. A full charge provides approximately 150 minutes of cordless use for each device.

Image: Hatteker clipper and trimmer connected via USB cables for charging, illustrating the fast charging capability and battery life.
2. Attaching Guide Combs:
Select the appropriate guide comb for your desired hair length. For the main clipper, choose from 10 different lengths. For the T-blade trimmer, select from 4 detail guide combs. Align the comb with the blade and push it firmly until it clicks into place.

Image: Hatteker clipper demonstrating the adjustable taper lever and a selection of guide combs, highlighting versatility in haircutting.
3. Adjusting Taper Lever (Clipper Only):
The main clipper features an adjustable taper lever that allows for precise control over 5 lengths (0.5mm, 1mm, 1.5mm, 2mm, 2.5mm) without changing guide combs. Move the lever up or down to select the desired cutting length.
Operating Instructions
General Usage:
- Ensure the device is fully charged before use.
- Attach the desired guide comb and adjust the taper lever if using the main clipper.
- Turn on the clipper/trimmer using the power button.
- For best results, use on clean, dry hair.
- Move the clipper/trimmer against the direction of hair growth for an even cut.
- Regularly clear accumulated hair from the blades during use to maintain performance.
- After use, turn off the device.
Using the Hair Clipper:
The main clipper is ideal for general haircuts and fades. The adjustable taper lever allows for seamless blending and precise length control. Use the larger guide combs for longer hair and gradually switch to shorter combs or adjust the taper lever for shorter sections.

Image: A man receiving a haircut using the Hatteker clipper, demonstrating its high performance and effortless cutting.
Using the T-Blade Trimmer:
The T-blade trimmer is designed for detailed work, including outlining, edging, beard trimming, and artistic carvings. Its zero-gap blade allows for extremely close cuts (approximately 0.1mm) without causing irritation.

Image: Close-up of the Hatteker T-blade trimmer, highlighting its factory-calibrated zero gap for precise styling, sculpting, and trimming.
Maintenance
Cleaning the Blades:
- After each use, turn off the clipper/trimmer and remove any attached guide combs.
- Use the provided cleaning brush to remove loose hairs from the blades and the body of the device.
- For a more thorough cleaning, the blades can be rinsed under running water. Ensure the device is turned off and disconnected from power before rinsing. Allow blades to air dry completely before reattaching or storing.
Lubricating the Blades:
To maintain optimal cutting performance and blade longevity, apply a few drops of the included lubricant oil to the blades after every few uses or after rinsing. Turn on the device for a few seconds to allow the oil to distribute evenly.
Storage:
Store the clipper and trimmer set in the provided pouch or a dry, safe place away from direct sunlight and moisture. Ensure the devices are clean and dry before storage.
Troubleshooting Guide
If you encounter any issues with your Hatteker Hair Clippers and Trimmers Set, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Low battery; Device not charged. | Charge the device fully using the provided USB cable. Check the LCD display for battery level. |
| Poor cutting performance; pulling hair. | Blades are dull or clogged with hair; Insufficient lubrication. | Clean the blades thoroughly with the cleaning brush. Apply lubricant oil to the blades. If issues persist, blades may need replacement. |
| Device makes unusual noise. | Blades are not properly aligned or lubricated; Internal issue. | Ensure blades are clean and well-lubricated. If the noise continues, discontinue use and contact customer support. |
| LCD display not working. | Device is off; Battery completely drained; Malfunction. | Turn on the device. Charge the device. If still not working, contact customer support. |
If the problem persists after trying these solutions, please contact Hatteker customer support for further assistance.
Product Specifications
- Model Name: RFC-656
- Item Model Number: DE-656
- Brand: Hatteker
- Product Dimensions: 8.35 x 3.27 x 5.98 inches
- Item Weight: 1.68 Pounds
- Battery Type: Lithium-Ion (1 LR44 batteries included)
- Runtime: Approximately 150 minutes (2 hours and 30 minutes) per charge
- Included Components: Clipper, T-blade trimmer, 10 clipper guide combs, 4 detail trimmer guide combs, lubricant oil, cleaning brush, grooming apron, 2 USB cables, pouch.
- Blade Material: Self-sharpened Titanium-coated blades
- Taper Lever Settings: 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm
- Trimmer Zero Gap: Close to 0.1mm
Warranty and Support
Hatteker products are manufactured with high-quality standards. For information regarding warranty coverage, please refer to the warranty card included in your product packaging or visit the official Hatteker website.
For technical support, troubleshooting assistance, or inquiries about replacement parts, please contact Hatteker customer service. Contact details can typically be found on the product packaging or the official brand website.
Note: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is for personal grooming use.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.