Introduction
This manual provides essential information for the safe and efficient operation of your HYUDJ HY6x15W Moving Head Stage Light. Please read this manual thoroughly before installation and use, and retain it for future reference.
The HYUDJ HY6x15W is a compact and powerful moving head stage light featuring 6x15W RGBW 4-in-1 LEDs, designed for various lighting applications. It offers multiple control modes including DMX512, Master/Slave, Auto, and Sound Activated modes.
Safety Information
- Power Supply: Ensure the power supply voltage matches the specifications (AC90V-240V, 50-60Hz).
- Grounding: Always connect the unit to a grounded power outlet to prevent electric shock.
- Ventilation: Do not block ventilation openings. Ensure adequate airflow around the unit to prevent overheating.
- Installation: Install the unit securely using appropriate mounting hardware (e.g., ceiling mount, pole mount). Ensure the mounting surface can support the weight of the fixture.
- Water Exposure: Do not expose the unit to rain or moisture.
- Maintenance: Disconnect power before any cleaning or maintenance. Refer servicing to qualified personnel only.
- Eye Safety: Avoid direct eye exposure to the light source.
Product Overview
The HYUDJ HY6x15W Moving Head Stage Light is designed for dynamic lighting effects. Key components include the LED array, control panel, DMX input/output, and power input/output.
Dimensions

The fixture measures approximately 15"L x 15"W x 15"H (overall product dimensions, likely including movement range) and weighs 9 pounds. The compact design includes a cooling fan for efficient heat dissipation.
Key Components and Connections

- LED Array: Features 6x15W RGBW 4-in-1 LEDs for various color mixing and effects.
- LCD Display: For menu navigation and setting control modes.
- DMX IN/OUT: 3-pin XLR connectors for DMX512 control signal input and daisy-chaining to other fixtures.
- Power IN/OUT: PowerCon compatible connectors for power input and daisy-chaining power to other fixtures.
Setup
Unpacking
Carefully unpack the fixture and check for any damage during transit. The package should include:
- HYUDJ HY6x15W Moving Head Stage Light (x1)
- Power Cable (x1)
- DMX Cable (x1)
- Mounting Bracket (x1)
- Instruction Manual (this document)
Mounting
The fixture can be mounted on a ceiling or pole. Always use the provided mounting bracket and ensure all connections are secure. For overhead installations, use a safety cable (not included) as an additional safety measure.
- Attach the mounting bracket to the fixture using the designated screws.
- Securely fasten the bracket to a truss, ceiling, or pole using appropriate clamps or hardware (not included).
- Ensure the fixture is stable and cannot vibrate loose.
Power Connection
Connect the power cable to the Power IN port on the fixture and then to a grounded power outlet (AC90V-240V, 50-60Hz). Multiple units can be daisy-chained for power using the Power OUT port, provided the total current draw does not exceed the circuit's capacity.
DMX Connection (Optional)
For DMX control, connect a DMX controller to the DMX IN port of the first fixture in the chain. Use the DMX OUT port to connect to the DMX IN of the next fixture, and so on. Ensure the last fixture in the chain has a DMX terminator (not included) for optimal signal integrity.

Operating Modes
The HYUDJ HY6x15W offers four primary control modes, selectable via the LCD display menu.

1. DMX512 Mode
This mode allows for precise control over all fixture functions (pan, tilt, color, brightness, strobe, etc.) using an external DMX controller. Set the DMX address for each fixture via the LCD menu. Refer to the DMX Channel Chart section for detailed channel assignments.
2. Master/Slave Mode
Connect multiple fixtures via DMX cables. Set one fixture as the "Master" and the others as "Slave." The slave units will mirror the master unit's movements and effects, creating synchronized lighting displays without a DMX controller.
3. Auto Mode (Work Auto)
The fixture will run through a series of pre-programmed internal lighting sequences automatically. This mode is suitable for standalone operation without external control.
4. Sound Activated Mode
The built-in microphone detects ambient sound, and the light effects will change and move in sync with the music or audio. Sensitivity can often be adjusted via the menu.
DMX512 Control
The HYUDJ HY6x15W utilizes DMX512 protocol for advanced control. Each fixture requires a unique DMX starting address. The fixture supports 15 DMX channels.
Setting DMX Address
Use the LCD display and menu buttons (MENU, UP, DOWN, ENTER) to navigate to the DMX address setting. Adjust the address as required. Ensure no two fixtures have the same starting address in a DMX chain.
DMX Channel Chart (Example - typical 15-channel setup)
| Channel | Function | Value Range (0-255) | Description |
|---|---|---|---|
| 1 | Pan | 0-255 | 0-540 degrees Pan movement |
| 2 | Pan Fine | 0-255 | Fine adjustment for Pan |
| 3 | Tilt | 0-255 | 0-270 degrees Tilt movement |
| 4 | Tilt Fine | 0-255 | Fine adjustment for Tilt |
| 5 | Pan/Tilt Speed | 0-255 | Adjust speed of Pan/Tilt movement (Fast to Slow) |
| 6 | Dimmer | 0-255 | 0-100% brightness control |
| 7 | Strobe | 0-255 | 0 = No strobe, 1-255 = Strobe speed (Slow to Fast) |
| 8 | Red LED | 0-255 | Red intensity (0-100%) |
| 9 | Green LED | 0-255 | Green intensity (0-100%) |
| 10 | Blue LED | 0-255 | Blue intensity (0-100%) |
| 11 | White LED | 0-255 | White intensity (0-100%) |
| 12 | Color Macro | 0-255 | Pre-programmed color combinations |
| 13 | Effect Macro | 0-255 | Pre-programmed movement/color effects |
| 14 | Sound Sensitivity | 0-255 | Adjust sensitivity for Sound Activated mode |
| 15 | Reset / Function | 0-255 | Fixture reset or special functions |
Note: This is a typical DMX channel assignment. Specific functions and values may vary slightly. Refer to the product's internal DMX chart if available on the device's LCD.
Maintenance
Cleaning
Regular cleaning helps maintain optimal performance and extends the lifespan of the fixture.
- Disconnect power before cleaning.
- Use a soft, lint-free cloth to wipe the exterior of the fixture.
- For optical components (lenses), use a specialized lens cleaning solution and cloth to avoid scratches.
- Periodically clean the cooling fan and ventilation openings to ensure proper airflow.
Storage
When not in use, store the fixture in a dry, dust-free environment, preferably in its original packaging or a protective case.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not power on | No power supply; Faulty cable; Blown fuse | Check power connection; Test power cable; Replace fuse (if accessible and safe) |
| No DMX control | Incorrect DMX address; Faulty DMX cable; No DMX terminator; DMX controller issue | Verify DMX address; Check DMX cables; Add DMX terminator to last fixture; Check DMX controller output |
| Fixture not responding in Master/Slave | Incorrect mode setting; Faulty DMX cable between units | Ensure one unit is Master and others are Slave; Check DMX connections |
| Light output is dim or inconsistent | Overheating; Dirty lenses; LED failure | Ensure proper ventilation; Clean lenses; Contact support if LEDs are failing |
| Pan/Tilt movement erratic | Obstruction; Internal fault | Check for physical obstructions; Perform a fixture reset; Contact support |
Specifications
| Feature | Detail |
|---|---|
| Model Number | HY6x15W |
| Light Source | 6 x 15W RGBW 4-in-1 LEDs |
| Power Supply | AC90V-240V, 50-60Hz |
| Power Consumption | Approx. 90W (6 LEDs * 15W each) |
| Beam Angle | 4 Degrees |
| Pan Movement | 540 Degrees |
| Tilt Movement | 270 Degrees |
| Control Modes | DMX512, Master/Slave, Auto Mode, Sound Activated |
| DMX Channels | 15 Channels |
| Material | Aluminum, Engineering Plastic |
| Dimensions (L x W x H) | 15" x 15" x 15" (Overall) |
| Item Weight | 9 Pounds |
| Mounting | Ceiling Mount, Pole Mount |
Warranty and Support
The HYUDJ HY6x15W Moving Head Stage Light is designed with a high-quality cooling system to ensure longevity. For any questions or issues, please contact HYUDJ customer support.
Contact Information: Refer to the after-sales mailbox provided with your purchase documentation. Our support team aims to respond within 24 hours to assist with troubleshooting and resolutions.