Introduction
The Tenlamp G9 Live Sound Card is an integrated audio mixer and interface designed for live streaming, podcasting, gaming, and content creation. It offers real-time audio adjustments, voice modulation, sound effects, and broad compatibility with various devices and platforms. This manual provides detailed instructions for setting up, operating, and maintaining your G9 Live Sound Card.
Image: The Tenlamp G9 Live Sound Card, showcasing its main unit and accompanying connection cables.
Package Contents
- 1 x Tenlamp G9 Audio Mixer
- 1 x USB-C OTG Cable
- 1 x USB A-C Cable
- 2 x 3.5mm TRRS Audio Cables
- 1 x User Manual
Image: Visual representation of the Tenlamp G9 Live Sound Card and all included accessories.
Setup Guide
1. Powering the Device
The G9 Live Sound Card features a built-in 2000mAh battery, providing up to 6 hours of continuous operation when fully charged. It can be powered via a power adapter, power bank, or a PC using the USB-C port.
Image: The G9 mixer on a desk, illustrating its portability and battery-powered operation.
2. Connecting to Devices
The G9 offers wide compatibility with computers, tablets, smartphones, and cameras, supporting Windows, Mac OS, Android, and iOS platforms.
- USB-C Digital I/O: Use the USB-C port for digital signal input/output with PCs or mobile devices. This connection also allows for charging the connected smartphone simultaneously.
- 3.5mm TRRS Analog Output: Two 3.5mm LIVE ports are available for analog output to mobile devices.
- Microphone Input: Connect your microphone to the designated MIC input ports.
- Headset/Monitoring: Connect your headset or monitoring headphones to the appropriate ports.
Image: The G9 mixer connected to both a computer and mobile devices, demonstrating its versatile connectivity.
Image: A detailed diagram illustrating the various input and output ports on the rear of the G9 Live Sound Card, including USB-C, 3.5mm TRRS, dynamic microphone, musical instrument, speaker, headset, and condenser microphone inputs.
Important Note on USB-C OTG Cable: The USB-C OTG cable is designed for data transmission and simultaneous smartphone charging. The USB-A end should be connected to a power source (adapter, power bank, computer) for power, not for data. The USB-C end marked with a mixer icon connects to the G9's USB-C OTG port, and the USB-C end with a phone icon connects to your recording mobile device or laptop. Direct USB microphone connection through the USB-C port is not supported.
Operating Instructions
1. Real-time Audio Monitoring and Control
The G9 features a 4.5-inch HD screen that digitally displays your audio adjustments in real-time, allowing for precise control over your audio mix.
Image: A user interacting with the G9 mixer, highlighting the 4.5-inch HD screen that visualizes audio mixing in real-time.
2. Individual Channel Control
Adjust microphone, music, headphone, and main output volumes independently using the dedicated controls. Fine-tune your microphone audio with the 3-band EQ (High, Mid, Low), dual reverb controls, and pitch adjustment knobs.
Image: The G9 mixer with highlighted controls for individual channel adjustments, including microphone, music, monitoring, and output volumes.
Image: A hand adjusting the fine-tuning controls on the G9 mixer, demonstrating the 3-band EQ, reverb length and width, and pitch adjustments.
3. Voice Modes and Effects
- Save Voice Modes: The G9 allows you to save up to 4 different voice modes. Press and hold a save button (A, B, C, or D) for 3 seconds to store your current audio settings. Access saved modes with a single click.
- Voice Changer: Use the VOICE CHANGER button to transform your voice into female, male, baby, or robot tones.
- Reverb Modes: Utilize 5 reverb modes and two reverb knobs for various effects.
- Auto-Tune: The 12-step auto-tune feature helps with vocal pitch correction.
- Sound Pads: The mixer includes 12 preset sound pads to inject entertainment into your streams.
Image: The G9 mixer displaying the four voice mode save buttons (A, B, C, D) and various entertainment features like voice changer, pitch, and reverb controls.
Image: The G9 mixer highlighting the voice changer button and the different voice effects available: female, male, baby, and robot.
Image: The G9 mixer showcasing the 12-step auto-tune feature, with various musical notes indicating pitch adjustments.
Image: The G9 mixer illustrating the auto-ducking mode, 12 preset sound pads, and 6 preset reverb modes (KTV, Professional, Popular, Streamer, MC).
4. Advanced Audio Features
- One-click Noise Reduction: Activate to ensure clear and clean audio.
- One-click Auto-Ducking: Automatically lowers background music volume when you speak, highlighting your voice.
- One-click Mute All Audio: Mutes all sound output.
- One-click Mute Microphone Channel: Mutes only the microphone input.
- One-click Direct Monitoring: Allows you to monitor your microphone audio directly.
- One-click Loopback: Enables recording of PC internal audio via the USB-C connection. Disabling this feature can prevent echoes.
- Follow Singing Mode: Eliminates 85% of the singer's vocal part in music, allowing you to hear the vocals in headphones for accurate singing, while the audience hears only the accompaniment and your voice.
Image: The G9 mixer highlighting the "DENOISE" button for intelligent noise reduction, along with other one-click functions like ducking and mute.
Image: The G9 mixer showing the buttons for monitoring the microphone, muting the microphone channel, and muting all audio output.
Image: A diagram illustrating the Loopback feature, where PC internal audio is sent to the mixer via USB-C and then sent back to the PC, useful for recording.
Image: The G9 mixer highlighting the "FOLLOW SINGING" button, explaining how it assists users who are not familiar with melodies or rhythms by allowing them to hear the original singer in their headphones.
Maintenance
To ensure the longevity and optimal performance of your Tenlamp G9 Live Sound Card, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the surface of the device. Avoid using abrasive cleaners, solvents, or strong chemicals, as these can damage the finish or internal components.
- Storage: Store the device in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
- Handling: Handle the device with care. Avoid dropping it or subjecting it to strong impacts, which can damage the internal circuitry or external controls.
- Connections: Always insert and remove cables gently. Do not force connectors, as this can damage the ports.
Troubleshooting
If you encounter issues with your Tenlamp G9 Live Sound Card, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power/Device not turning on | Low battery or power cable not connected properly. | Ensure the device is charged or connected to a stable power source via the USB-C port. Check cable connections. |
| No audio output | Volume levels too low, incorrect output selected, or cable issues. | Check all volume knobs (main output, headphone, music). Verify that the correct output device is selected on your computer/phone. Ensure audio cables are securely connected. |
| Microphone not working | Microphone volume low, mic muted, or incorrect mic input. | Increase microphone volume. Check if the microphone channel is muted. Ensure the microphone is connected to the correct MIC input. Note: USB microphones are not supported via the USB-C port. |
| Echo or feedback during recording | Loopback feature enabled unnecessarily. | Disable the Loopback feature if not intentionally recording PC internal audio. Adjust monitoring levels to prevent feedback. |
| Poor audio quality/Noise | Interference, high gain, or noise reduction not active. | Activate the one-click noise reduction feature. Reduce microphone gain if it's too high. Ensure all cables are properly shielded and away from interference sources. |
| Device not recognized by computer/phone | Incorrect cable, port, or driver issue. | Ensure you are using the correct USB-C cable and connecting to the designated OTG port on the G9. Try a different USB port on your computer. No specific drivers are usually needed, but ensure your operating system is up to date. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | G9 |
| Dimensions (L x W x H) | 10.2 x 6.7 x 2.1 inches (25.9 x 17.0 x 5.3 cm) |
| Item Weight | 1.96 pounds (0.89 kg) |
| Power Source | Battery Powered (2000mAh built-in battery) |
| Working Time | Up to 6 hours (on full charge) |
| Voltage | 5V |
| Number of Channels | 1 |
| Connectivity Technology | Auxiliary, USB-C |
| Display | 4.5-inch HD screen |
| Compatibility | Windows, Mac OS, Android, iOS (Computers, Tablets, Smartphones, Cameras) |
Warranty and Support
The Tenlamp G9 Live Sound Card comes with a 12-Month warranty from the date of purchase.
For technical support, troubleshooting assistance, or warranty claims, please contact tenlamp customer service. You can typically reach support by leaving a message through the Amazon platform where the product was purchased. Please provide your order details and a clear description of the issue to expedite assistance.
It is recommended to read this user manual thoroughly before setting up and operating the device to ensure a better user experience.
