Microwear Ultra 3 Mini Smartwatch 40mm User Manual

Introduction

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Microwear Ultra 3 Mini Smartwatch. Please read this manual carefully to ensure proper use and to maximize the features of your device.

Image: The Microwear Ultra 3 Mini Smartwatch, showcasing its design and the retail packaging.

1. Setup

1.1 Unboxing and Package Contents

Carefully unpack your Microwear Ultra 3 Mini Smartwatch. The package should contain the following items:

• 1 x Original Smartwatch
• 1 x Wireless Charger
• 1 x User Manual

1.2 Charging the Device

Before first use, fully charge your smartwatch. The device uses wireless charging.

1. Connect the wireless charger to a power source.
2. Place the smartwatch on the wireless charging pad.
3. The watch display will indicate charging status.
4. A full charge typically takes approximately 2 hours.

Note: The smartwatch has a 160 mAh high-capacity polymer battery.

1.3 Power On/Off

• To Power On: Press and hold the side button until the screen lights up.
• To Power Off: Press and hold the side button, then select "Power Off" on the screen.

1.4 App Installation and Bluetooth Pairing

To unlock the full potential of your smartwatch, download and install the companion application.

1. Download the App: Search for "M ActivePro" in your smartphone's app store (iOS or Android) and install it.
2. Enable Bluetooth: Ensure Bluetooth is enabled on your smartphone.
3. Open M ActivePro: Launch the M ActivePro application on your smartphone.
4. Pair Device: Follow the in-app instructions to search for and connect to your Microwear Ultra 3 Mini Smartwatch. The watch supports Bluetooth 5.1 and Bluetooth 3.0 for dual connection.

Image: A smartphone display showing the M ActivePro application successfully connected to the smartwatch, illustrating the dual Bluetooth primary connection process.

Note: The watch and phone support one-click connection and easy switching between connections.

2. Operating Instructions

2.1 Navigation and User Interface

The Microwear Ultra 3 Mini runs on Wearmax OS 10, offering an intuitive user experience.

• Gesture Operation: Swipe across the 1.54" IPS touch screen to navigate menus and functions.
• Smart Stacking Widgets: Access frequently used features quickly through intelligent widget stacking.
• Waterfall Menu & Scrolling Effects: Enjoy smooth transitions and special effects when scrolling through lists.
• Smart Island: A dynamic area on the screen for quick access to notifications and ongoing activities.
• Main Menu: Push the bottom card for the main menu interface.

2.2 Communication Features

• Bluetooth Calls: Make and receive calls directly from your watch when connected to your smartphone.
• Notifications: Receive synchronous display of messages from WeChat, QQ, SMS, and other applications.

2.3 Health Monitoring

The smartwatch provides comprehensive health tracking features:

• Heart Rate Detection: Supports 24-hour continuous heart rate monitoring.
• Pedometer: Tracks exercise steps, calorie consumption, and mileage.
• Sleep Monitoring: Objectively records and analyzes your sleep status, automatically active from 10 PM to 8 AM the next day.
• ECG: Electrocardiogram monitoring.
• Blood Pressure: Blood pressure measurement.
• Body Temperature: Body temperature monitoring.
• Female Physiology: Tracks female physiological cycles.

2.4 Fitness and Activity Tracking

• GPS Movement: Track your routes and activities with integrated GPS.
• Motion Detection Games: Engage in interactive games that utilize motion sensing.
• App Motion Tracking Video: Record and share your sport tracks with dynamic shots and background music via the M ActivePro app.

Image: A smartphone displaying GPS dynamic route tracking on a map, alongside heart rate range and other fitness metrics from the smartwatch.

2.5 Smart Features and Utilities

• ChatGPT Integration: Access ChatGPT directly from your watch for inquiries.


Image: The smartwatch screen showing the ChatGPT interface, prompting the user to click to inquire.

• NFC Access Control: Use NFC for convenient access control.
• Voice Assistant: Utilize the integrated voice assistant for commands and queries.
• Compass: A built-in compass for navigation.

Image: Three smartwatch screens demonstrating compass functionality, including calibration tips and two different display modes for direction and slope.
• Offline Voice Control: Control certain functions without an internet connection.
• Independent Ringtone & Clock: Customize your ringtone and use the watch as an independent clock.
• Long Bright Screen: Keep the screen active for extended periods.
• Bedside Lamp: Utilize the screen as a bedside lamp.
• Payment Code: Access payment codes directly from your watch.
• Calculator: A built-in calculator for quick calculations.
• Contact Person: Access your contacts.
• Weather: Get real-time weather updates.
• Stopwatch & Timer: Standard timing functions.
• Alarm Clock: Set alarms.
• Password Lock: Secure your watch with a password.
• Flashlight: Use the screen as a flashlight.
• Massage: Vibration massage function.
• SOS Alarm: Emergency alarm function.
• Album: View images on your watch.

2.6 Customization

• Watch Faces: Download over 500 free watch faces.
• AI Smart Dial Production: Create intelligent AI-generated watch faces.
• AI Painting: Use AI Painting to create exclusive custom watch faces.


Image: A smartphone screen displaying the AI Painting interface within the M ActivePro app, used for creating personalized watch faces with various artistic styles.

• Custom Dial Push: Push your personalized watch faces to the device.
• App Skin Function: Customize the appearance of the companion app.

2.7 Other Functions

• Game Download: Download and play games on your smartwatch.
• Background Management: Manage applications running in the background.
• Healthy Family Sharing: Share health information with family members.
• Bluetooth Photo: Remotely control your smartphone camera.
• Bluetooth Music: Control music playback on your smartphone.

3. Maintenance

3.1 Cleaning Your Smartwatch

• Wipe the screen and body with a soft, lint-free cloth.
• For stubborn dirt, slightly dampen the cloth with water. Avoid using harsh chemicals or abrasive materials.
• Ensure the charging contacts are clean and dry.

3.2 Water Resistance (IP68)

The Microwear Ultra 3 Mini Smartwatch is rated IP68 for water resistance.

• This means it is protected against dust ingress and can withstand immersion in water up to 1.5 meters for up to 30 minutes.
• Avoid using the watch in hot water, saunas, or steam rooms, as steam can penetrate seals.
• Do not press buttons underwater.
• Dry the watch thoroughly after exposure to water.

3.3 Battery Care

• Avoid extreme temperatures, which can degrade battery life.
• Charge the watch regularly, but avoid leaving it fully discharged for extended periods.
• Use only the provided wireless charger.

4. Troubleshooting

4.1 Common Issues and Solutions

4.2 Factory Reset

If you encounter persistent issues, a factory reset may resolve them. This will erase all data on your watch and restore it to its original settings.

1. Navigate to the "Settings" menu on your smartwatch.
2. Look for "System," "Reset," or "Factory Reset" options.
3. Confirm the reset when prompted.

Note: A factory reset will require you to re-pair your watch with your smartphone and reconfigure settings.

5. Specifications

6. Warranty and Support

Warranty Information: Specific warranty details are not provided within this manual. Please refer to the documentation included with your purchase or contact the retailer/manufacturer directly for warranty terms and conditions.

Customer Support: For technical assistance, troubleshooting beyond this manual, or inquiries regarding your Microwear Ultra 3 Mini Smartwatch, please refer to the "M ActivePro" application for support resources or visit the official JINSHANGZI website.