1. Introduction
Thank you for choosing the Talos 5-Light Convertible Chandelier by Tawson. This versatile lighting fixture is designed to enhance the ambiance of various indoor spaces, including kitchens, dining rooms, living rooms, hallways, entryways, bedrooms, and balconies. Its contemporary design with a brushed nickel finish and satin etched glass shades allows it to seamlessly integrate with both traditional and modern decor.
This manual provides essential information for the safe and proper installation, operation, and maintenance of your new chandelier. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Image 1.1: The Talos 5-Light Convertible Chandelier shown installed in a living room setting, highlighting its brushed nickel finish and five satin etched glass shades.
2. Important Safety Information
To reduce the risk of fire, electric shock, or personal injury, always follow these basic safety precautions:
- WARNING: To avoid possible electric shock, turn off the electricity at the main fuse box or circuit breaker panel before beginning installation.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). If you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician.
- This fixture is designed for 110-120V AC power supply. Ensure your household voltage matches this requirement.
- Do not exceed the maximum wattage specified for the bulbs. This fixture uses (5) bulbs, up to 100W traditional incandescent medium bulbs, or equivalent LED/CFL bulbs.
- If using a dimmer switch, ensure that the bulbs installed are dimmable. Non-dimmable bulbs may be damaged or cause flickering when used with a dimmer.
- Handle glass components with care to prevent breakage and injury.
- Keep flammable materials away from the light fixture when in operation.
- Do not modify the fixture in any way. Any modifications may void the warranty and create a safety hazard.
3. Package Contents
Carefully unpack all components and inspect them for any damage. If any part is missing or damaged, do not attempt to assemble or install the fixture. Contact customer support immediately.
The package should include the following items:
- Chandelier Fixture Body (with arms and bulb sockets)
- Satin Etched Glass Shades (5 pieces)
- Ceiling Canopy
- Adjustable Chain/Rod Assembly
- Mounting Hardware (crossbar, mounting screws, wire nuts, ground screw)
- Instruction Manual
Image 3.1: An exploded view of the Talos 5-Light Chandelier, showing the main fixture body, glass shades, and chain assembly.
4. Setup and Installation
This chandelier is designed for easy installation and can be configured as either a traditional chandelier (pendant style) or a semi-flush mount fixture. It is suitable for both flat and sloped ceilings. Please follow the detailed instructions provided in the included installation guide for your specific configuration.
General Installation Steps:
- Turn Off Power: Before starting, ensure the power to the circuit at the main fuse box or circuit breaker is completely off.
- Prepare Mounting Location: Securely attach the mounting crossbar to the electrical junction box in the ceiling. Ensure the junction box is properly grounded.
- Assemble Fixture: Depending on your desired configuration (chandelier or semi-flush), assemble the main fixture body, chain/rod, and ceiling canopy as per the specific instructions.
- Wire Connections: Connect the fixture's wires to the household electrical wires using the provided wire nuts. Connect the black wire (live) to the black wire, the white wire (neutral) to the white wire, and the ground wire to the ground wire. Ensure all connections are secure.
- Mount Fixture: Carefully lift the assembled fixture and secure the ceiling canopy to the mounting crossbar.
- Install Shades and Bulbs: Attach the satin etched glass shades to the fixture. Insert the required (5) E27 base bulbs (not included) into the sockets.
- Restore Power: Once installation is complete and all components are secure, restore power at the main fuse box or circuit breaker.
Image 4.1: A detailed view of the chandelier's ceiling canopy and adjustable chain, illustrating the connection point to the ceiling.
5. Operating Instructions
The Talos 5-Light Chandelier operates via a standard wall switch. If you have a compatible wall dimmer switch installed, the fixture supports dimming functionality, provided that dimmable bulbs are used.
Bulb Requirements:
- Uses (5) bulbs.
- Compatible with LED, CFL, or traditional incandescent medium bulbs.
- Maximum wattage per bulb: 100W.
- Bulb Base: E27.
- For dimmer function, use only dimmable bulbs. Bulbs are not included with the fixture.
Image 5.1: A close-up view of one of the chandelier's satin etched glass shades and the connection point to the fixture arm, showing the area where bulbs are installed.
6. Care and Maintenance
Proper care and maintenance will ensure the longevity and appearance of your chandelier.
- Cleaning: Always turn off the power to the fixture and allow it to cool before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish. The open design of the glass shades makes them easy to remove for cleaning.
- Bulb Replacement: Ensure the power is off and the bulbs have cooled before attempting to replace them. Unscrew old bulbs and screw in new E27 base bulbs, ensuring they meet the specified wattage and type requirements.
- Inspection: Periodically check all connections and mounting hardware to ensure they remain secure.
7. Troubleshooting
If you experience issues with your chandelier, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Loose wire connections. Faulty bulb. | Check circuit breaker/fuse. Ensure all wire connections are secure (with power off). Replace bulb. |
| Light flickers. | Loose bulb. Incorrect bulb type for dimmer. Loose wire connection. | Tighten bulb. Ensure dimmable bulbs are used with a dimmer switch. Check wire connections (with power off). |
| Dimmer not working. | Non-dimmable bulbs installed. Incompatible dimmer switch. | Replace with dimmable bulbs. Consult an electrician to verify dimmer compatibility. |
| Fixture appears crooked or unstable. | Improper mounting. Loose mounting hardware. | Ensure mounting crossbar is level and securely attached to the junction box. Tighten all mounting screws. |
If the problem persists after attempting these solutions, please contact a qualified electrician or Tawson customer support for assistance.
8. Product Specifications
| Brand | Tawson |
| Model Number | 13820 |
| Product Dimensions | 26.1"L x 26.1"W x 22.25"H |
| Item Weight | 10.8 Pounds |
| Color | Brushed Nickel (Fixture), Etched White (Shades) |
| Material | Glass, Metal |
| Style | Modern |
| Light Fixture Form | Chandelier (Convertible to Semi Flush Mount) |
| Room Type | Kitchen, Living Room, Bedroom, Hallway, Entryway, Dining Room |
| Power Source | AC |
| Voltage | 110 Volts (AC) |
| Number of Light Sources | 5 |
| Wattage | 100 watts (max per bulb) |
| Bulb Base | E27 |
| Included Components | Mounting Hardware |
| Assembly Required | No (Minor assembly for installation) |
| Country of Origin | China |
9. Warranty and Support
For information regarding warranty coverage, technical support, or replacement parts, please contact Tawson customer service directly. You can often find contact details on the product packaging or by visiting the official Tawson brand store online.
Visit the Tawson Store: Tawson Official Store
Please have your model number (13820) and purchase information ready when contacting support.
