AEOCKY 3rd-Gen Space Heater (Model Lucas-ENFG3A) Instruction Manual

1. Important Safety Instructions

Please read all instructions carefully before using this heater. Failure to follow these instructions may result in fire, electric shock, injury, or property damage. Keep this manual for future reference.

• General Safety: Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
• Placement: Place the heater on a firm, level surface. Do not place on soft surfaces like beds or rugs where openings may become blocked. Maintain a minimum distance of 3 feet (0.9 meters) from combustible materials such as furniture, pillows, bedding, papers, clothes, and curtains.
• Supervision: Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
• Power Cord: Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
• Moisture: Do not use the heater in bathrooms, laundry areas, or similar indoor locations where it may come into contact with water.
• Overheating Protection: This heater is equipped with an automatic overheat protection system. If the heater overheats, it will automatically shut off. To reset, unplug the heater from the electrical outlet, wait 10 minutes for the unit to cool, then plug it back in.
• Tip-Over Protection: The heater will automatically shut off if it is tipped over. Place it upright on a flat, stable surface to resume operation.
• Child Lock: Utilize the child lock feature to prevent accidental operation by children.
• Polarized Plug: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

The AEOCKY heater incorporates 8 layers of safety protection and has undergone over 20 extreme environment tests to ensure user safety. Always operate the device according to these instructions.

Image: Overview of AEOCKY Space Heater's 5 upgraded safety programs, 20+ rigorous tests, enhanced safety plug, and full body V0 flame retardant material.

2. Product Overview

The AEOCKY 3rd-Gen Space Heater features advanced PTC ceramic heating technology and an inclined blade cross-flow wind wheel for efficient and quiet heating. It includes an AI-powered thermostat for energy efficiency and a remote control for convenient operation.

Image: The AEOCKY 3rd-Gen Space Heater in black, showing its tower design, digital display, and included remote control.

Key Features:

• Matrix PTC Ceramic Heating Plate: For increased heat output and thermal efficiency.
• Inclined Blade Cross-Flow Wind Wheel: Improves airflow and reduces noise.
• AI-Powered ECO 3.0 Algorithm: Dynamic power adjustment for energy savings.
• 360° Enclosed Shaded-Pole Motor: Contributes to ultra-quiet operation (37dB).
• 70° Wide-Angle Oscillation: Distributes heat evenly across the room.
• Remote Control: For convenient adjustment of settings.
• Safety Features: Overheat protection, tip-over protection, child lock, 24H auto power-off.

Image: Diagram comparing 1.0 resistor heating wire, 2.0 PTC heating plate with blade fans, and 3.0 Matrix PTC Ceramic Cross-Flow Fan Wheel, highlighting improved heat output, efficiency, and quiet operation.

Image: Illustration of the 360° Enclosed Shaded-Pole Motor and Inclined Blade Cross-Flow Fan Wheel, explaining how they contribute to the heater's 37dB ultra-quiet operation.

3. Setup

1. Unpacking: Carefully remove the heater from its packaging. Retain packaging for storage if needed.
2. Placement: Place the heater on a stable, flat, and heat-resistant surface. Ensure it is at least 3 feet (0.9 meters) away from walls, furniture, curtains, and other combustible materials. Do not block air intake or exhaust vents.
3. Power Connection: Ensure the heater is switched off before plugging it into a 120V AC, 60Hz electrical outlet. The plug is polarized; if it does not fit, reverse it. Do not force it or use an adapter.
4. Initial Odor: Upon first use, a slight odor may be present due to manufacturing processes. This is normal and will dissipate quickly with ventilation.

4. Operating Instructions

The heater can be operated using the control panel on the unit or the included remote control.

Control Panel and Remote Control Functions:

• Power Button (Ⓘ): Press to turn the heater ON or OFF.
• Mode Button (M): Cycle through heating modes (e.g., High, Low, ECO).
• Temperature Adjustment (+ / -): Adjust the desired temperature setting. The AI Thermostat will maintain this temperature.
• Oscillation Button (↻): Activate or deactivate the 70° oscillation function.
• Timer Button (⏱): Set the auto-off timer (up to 24 hours). Press repeatedly to increase the time in 1-hour increments.
• Child Lock Button (🔒): Press and hold for 3 seconds to activate/deactivate the child lock. When active, other buttons will not respond.
• Silent Mode: The heater operates at its lowest noise level. This is typically integrated into the ECO mode or a specific low-power setting.
• Auto Screen Off: The display screen will automatically turn off after a period of inactivity to reduce light disturbance.
• Smart Power-Off Memory: The heater will remember the last settings used when powered off and on again.

ECO 3.0 Mode:

The AI-Powered ECO 3.0 mode automatically adjusts the heater's power output to maintain the set temperature with optimal energy efficiency. It uses millisecond-level calculations and 18 independent ceramic heating modules to dynamically adjust power, aiming for up to 32% energy savings compared to traditional ECO modes.

Image: Diagram illustrating the AI-Powered ECO 3.0 mode, showing dynamic power adjustment and 32% energy savings compared to old ECO systems.

5. Maintenance

Regular maintenance ensures optimal performance and longevity of your heater.

• Cleaning:
  • Always unplug the heater and allow it to cool completely before cleaning.
  • Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents.
  • Use a vacuum cleaner with a brush attachment to remove dust from the air intake and exhaust vents.
  • Never immerse the heater in water or allow water to drip into the interior.
• Storage:
  • If storing the heater for an extended period, clean it thoroughly.
  • Store the heater in its original packaging in a cool, dry place.
  • Do not place heavy objects on top of the heater during storage.

6. Troubleshooting

7. Specifications

8. Warranty and Support

AEOCKY stands by the quality and durability of its products. This heater is designed to provide reliable warmth for an extended period.

• Warranty Period: The AEOCKY 3rd-Gen Space Heater is covered by a three-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
• Customer Support: For any questions, concerns, or warranty claims, please contact AEOCKY customer support. Refer to the product packaging or the official AEOCKY website for contact information. Please have your model number (Lucas-ENFG3A) and purchase details ready when contacting support.

Note: The provided product data did not include specific video URLs with creator type or m3u8 format, therefore no videos could be embedded in this manual.