1. Introduction
This manual provides essential information for the safe and effective use of your Alwa Hydrogen Water Bottle Generator MTH-01. This portable device utilizes advanced SPE/PEM technology to generate hydrogen-rich water, designed to support enhanced hydration. Please read these instructions carefully before first use and retain for future reference.
Image 1.1: Illustration of hydrogen water's interaction with free radicals, showing H2 + free radicals = H2O. This process is central to the bottle's function.
2. Product Features
- Advanced Hydrogen Production: Utilizes SPE/PEM technology to generate high concentrations of hydrogen ions (up to 1800 ppb) in approximately three minutes.
- User-Friendly Operation: Simple one-button activation for hydrogen generation.
- Premium Material: Crafted from durable borosilicate glass, ensuring purity and longevity.
- Portable Design: Compact 420ml capacity with a non-slip base, suitable for various environments including office and travel.
- USB Charging: Convenient USB charging capability for on-the-go power.
- Easy Maintenance: Features removable parts for straightforward cleaning.
Image 2.1: Detailed view of the Alwa Hydrogen Water Bottle, highlighting its 420ml capacity, borosilicate glass construction, USB charging port, and anti-slip silicone base. Dimensions are approximately 7.5 inches in height and 2.5 inches in width.
3. Package Contents
Upon unpacking, please ensure all the following items are present:
- Alwa Hydrogen Water Bottle Generator (Glass Body with Base)
- USB Charging Cable
- Cleaning Brush
- Reusable Straw
- User Manual (This document)
Image 3.1: The Alwa Hydrogen Water Bottle shown with its packaging and included accessories, including the USB charger, cleaning brush, and reusable straw.
Image 3.2: The Alwa Hydrogen Water Bottle highlighting its portability and the included cleaning brush and reusable straw.
4. Setup
- Initial Cleaning: Before first use, disassemble the bottle by unscrewing the top lid and the bottom base. Clean all parts (glass body, top lid, bottom base) with warm water and the provided cleaning brush. Ensure all components are thoroughly rinsed and dried.
- Assemble the Bottle: Reattach the bottom base to the glass body. Ensure the white rubber seal on the base is properly seated and tightened to prevent leaks. Then, screw on the top lid.
- Initial Charge: Connect the USB charging cable to the charging port on the base of the bottle and to a suitable USB power source. Charge the bottle fully before its first use. A full charge typically takes 2-3 hours and provides power for approximately 15-20 electrolysis cycles.
Video 4.1: This video demonstrates how to properly assemble the Alwa Hydrogen Water Bottle, focusing on securing the base to prevent leaks and ensuring the rubber seal is correctly positioned. It also shows how to use the cleaning brush for maintenance.
5. Operating Instructions
- Fill with Water: Unscrew the top lid and fill the glass body with potable water. Do not overfill; leave some space at the top.
- Start Generation: Securely screw the top lid back on. Press the power button located on the base of the bottle. A blue light will illuminate, indicating that the hydrogen generation process has started.
- Electrolysis Cycle: The device will perform a 3-minute electrolysis cycle, during which hydrogen bubbles will be visible in the water.
- Enjoy Hydrogen Water: Once the cycle is complete, the blue light will turn off. Your hydrogen-rich water is now ready to drink.
Video 5.1: This video demonstrates the hydrogen generation process. The bottle is filled with water, and upon activation, a blue light illuminates as hydrogen bubbles are produced through electrolysis.
6. Maintenance
Regular cleaning and proper battery care will ensure the longevity and optimal performance of your Alwa Hydrogen Water Bottle.
- Daily Cleaning: After each use, rinse the glass body and lid with warm water. For thorough cleaning, disassemble the bottle and use the provided cleaning brush to clean the inside of the glass and the base components.
- Deep Cleaning: For optimal performance and hygiene, perform a deep clean of the electrolysis plate in the base every 20 cycles (approximately every 2-3 hours of total operation). Use the cleaning brush to gently scrub the plate.
- Battery Care: To maintain battery health and extend its lifespan, it is recommended to fully charge the device after approximately 20 electrolysis cycles. If the red light flashes, it indicates a low battery and requires charging.
- Storage: When not in use for extended periods, ensure the bottle is clean, dry, and fully charged. Store in a cool, dry place.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bottle is leaking. | Rubber seal on the base is not properly seated or tightened. | Disassemble the bottle, ensure the white rubber seal on the base is correctly positioned, and tighten the base securely to the glass body. |
| Device not generating hydrogen (no bubbles, no blue light). | Low battery or device not turned on. | Charge the bottle fully. Ensure the power button is pressed firmly. |
| Red light flashing. | Low battery. | Connect the USB charging cable and charge the device until the light indicates a full charge (usually turns off or changes color). |
8. Specifications
- Model Number: MTH-01
- Brand: Alwa
- Capacity: 420 Milliliters
- Material: Borosilicate Glass, Metal
- Power Source: Battery Powered (1 Lithium Polymer battery included)
- Product Dimensions: 7.1L x 7.1W x 21.6H Centimetres (2.8 x 2.8 x 8.5 inches)
- Weight: 748 g (1.65 lbs)
- Special Features: Automatic Shut-Off, Lightweight, Portable
- Purification Method: Ion Exchange (for hydrogen generation)
9. Warranty and Support
The Alwa Hydrogen Water Bottle Generator is supported by dedicated customer service. For any inquiries, technical assistance, or warranty claims, please refer to the contact information provided with your purchase or visit the official Alwa website. Please retain your proof of purchase for warranty purposes.
The product comes with a standard return policy of 30 days for refund or replacement, as per the purchase platform's terms.