1. Introduction
The AUXITO 5000A Car Battery Jump Starter is a versatile and essential tool designed to provide reliable power for various automotive and portable electronic needs. With a powerful 5000A peak current, it can jump start a wide range of vehicles, including those with up to 8.5L gas and 8.0L diesel engines. Beyond its primary function, this device integrates a high-luminosity LED work panel light and serves as a portable power bank, ensuring you are prepared for emergencies or outdoor activities.
2. Package Contents
Please verify that all items listed below are included in your package:
- 1 x Portable Jump Starter
- 1 x Smart Jumper Cable Clip
- 1 x USB-A to C Charging Cable
- 1 x Portable Storage Bag
- 1 x User Manual
Image: Contents of the AUXITO Jump Starter package.
3. Product Features
- Powerful Jump Starting Capability: Delivers a 5000A peak current, capable of starting 12V vehicles with up to 8.5L gas and 8.0L diesel engines. A single charge can provide up to 50 starts, with a cycle life of over 1000 times.
- Super Bright LED Work Panel Light: Features a 2000 lumen LED panel light with four modes: Lighting (High Brightness, Normal Brightness), Strobe, and SOS. Includes a built-in hook and strong magnet for hands-free operation.
- Portable Power Bank Functionality: Equipped with a USB port and high battery capacity to charge various USB devices such as smartphones, tablets, and cameras without an external power outlet.
- Multiple Secure Protections: Utilizes advanced QDSP technology and 10 intelligent protection features to ensure safe operation. These include overvoltage, reverse polarity, low temperature, overcharge, short circuit, overcurrent, high temperature, overload, and anti-spark protection. Operates efficiently in temperatures from -4°F to 131°F.
- Compact & Lightweight Design: Designed for portability and easy storage, making it an ideal companion for road trips and camping.
Image: Overview of the jump starter's power and engine compatibility.
Image: The jump starter's integrated LED panel light with various modes.
Image: The jump starter functioning as a portable power bank.
Image: Diagram of the 10 smart safety protections.
Image: The compact and lightweight design of the jump starter.
4. Important Safety Information
- Read all instructions carefully before use.
- Ensure the jump starter is at least 50% charged before attempting to jump start a vehicle.
- Connect the red clamp to the positive (+) terminal and the black clamp to the negative (-) terminal of the vehicle battery.
- Do not allow the red and black clamps to touch each other once connected to the jump starter.
- Do not attempt to jump start a frozen battery.
- Keep out of reach of children.
- Store in a cool, dry place away from direct sunlight and high temperatures.
5. Charging the Jump Starter
Before first use, fully charge the AUXITO Jump Starter. To charge, connect the provided USB-A to C charging cable to the Type-C input port on the device and plug the other end into a suitable USB power adapter (not included). The battery indicator lights will show the charging progress. Ensure the device is fully charged for optimal performance.
For regular maintenance, it is recommended to charge the jump starter every three months if not used regularly, to maintain battery health.
6. Operating Instructions
6.1. Jump Starting a Vehicle
- Ensure the jump starter is powered on and has at least 50% battery charge.
- Insert the connector of the smart jumper cable into the jump starter's port.
- Connect the red (+) clamp to the positive terminal of the vehicle's battery.
- Connect the black (-) clamp to the negative terminal of the vehicle's battery.
- Once connected, the smart clip's indicator light will turn solid green, indicating it is safe to proceed.
- Start your vehicle. If it doesn't start immediately, wait 30 seconds before trying again.
- Once the vehicle starts, immediately remove the jumper cables from the vehicle battery, then disconnect from the jump starter.
Image: Step-by-step guide for jump starting a vehicle.
Video: Demonstrating how to use the AUXITO Jump Starter for vehicle starting.
6.2. Using the LED Work Panel Light
The integrated 2000 lumen LED work panel light offers multiple modes for various situations:
- High Brightness Mode: Press and hold the light button to activate. Ideal for illuminating dark engine bays or work areas. The built-in magnet allows for hands-free attachment to metal surfaces.
- Normal Brightness Mode: Press the light button once from High Brightness. Suitable for general illumination during camping or other activities. The integrated hook allows for hanging.
- Normal Strobe Mode: Press the light button again. This mode can be used for signaling or to deter wildlife.
- Red Light SOS Mode: Press the light button a third time. This mode emits a red SOS signal, useful for attracting attention in roadside emergencies.
- To turn off the light, press the light button a fourth time or press and hold the button.
Image: High-brightness mode with magnetic attachment.
Image: Normal brightness mode with hanging design.
Image: Normal strobe mode for signaling.
Image: Red light SOS mode for emergencies.
6.3. Using as a Portable Power Bank
To use the jump starter as a power bank, simply connect your USB-powered devices (e.g., smartphones, tablets, cameras) to the USB output port(s) on the device using their respective charging cables. The jump starter will automatically begin charging your device.
7. Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Storage: Store the jump starter in its portable storage bag in a cool, dry place. Avoid extreme temperatures.
- Battery Care: If the product is not used regularly, it is recommended to charge it every three months to prolong battery life and ensure readiness.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Vehicle does not start | Jump starter battery is low. | Ensure the jump starter is charged above 50%. |
| Vehicle does not start | Incorrect clamp connection. | Verify red clamp is on positive (+), black clamp on negative (-). |
| Vehicle does not start | Smart clip indicator is not solid green. | Check connections. If battery voltage is too low, the smart clip may not activate. Use boost mode if available and safe, following manual instructions carefully. |
| LED light not working | Device is off or battery is depleted. | Turn on the device. Charge the jump starter if battery is low. |
| USB charging not working | Device is off or battery is depleted. | Turn on the device. Charge the jump starter if battery is low. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand | AUXITO |
| Model | J102 |
| Peak Output Current | 5000 Amps |
| Engine Compatibility | Up to 8.5L Gas, 8.0L Diesel (12V vehicles) |
| LED Work Light Luminosity | 2000 Lumens |
| Battery Type | Lithium Ion (1 included) |
| Item Weight | 2.09 pounds |
| Product Dimensions | 4.7 x 7.91 x 3.9 inches |
| Operating Temperature | -4°F to 131°F |
| Charging Port | USB-C Input |
| Output Ports | USB Output (for charging devices) |
10. Warranty and Support
Specific warranty information for this product is not provided in the available data. For detailed warranty terms, technical support, or any inquiries regarding your AUXITO Jump Starter, please refer to the official AUXITO website or contact their customer service directly. Keep your purchase receipt for warranty claims.
