M MATI Handguard Mount Brackets Kit Instruction Manual

1. Product Overview

The M MATI Handguard Mount Brackets Kit is designed to securely attach handguards to your Polaris ATV or Snowmobile handlebars. These brackets provide a stable mounting point, ensuring your handguards offer optimal protection against debris, branches, and harsh weather conditions. Constructed for durability, they are an essential component for enhancing rider safety and comfort.

2. Package Contents

The M MATI Handguard Mount Brackets Kit includes the following components:

• Handguard Mount Brackets Kit x1 (includes all necessary hardware)

3. Compatibility / Fitment

This Handguard Mount Brackets Kit (Manufacturer Part# 2889341 2879380) is compatible with a wide range of Polaris ATV and Snowmobile models. Please verify your specific model before installation.

3.1. Polaris ATV Models:

• Sportsman 1000 XP (2015-2024)
• Sportsman 1000 Touring XP (2015-2024)
• Sportsman 850 (2015-2024)
• Sportsman 850 HO/SP/High Lifter/Touring/Premium/Ultimate (2015-2024)
• Sportsman 800 (2017-2014)
• Sportsman 570 (2014-2024)
• Sportsman 570 HD/EPS/Touring/Utility/6x6/X2/Premium/Touring/Trail (2014-2024)
• Sportsman 550 (2009-2014)
• Sportsman 500 (2007-2013)
• Sportsman 450 HO/HD (2016-2024)
• Sportsman 400 (2008-2014)
• Sportsman 300 (2008-2010)
• Sportsman ETX (2015)
• Scrambler 1000 XP (2014-2024)
• Scrambler 850 (2013-2024)

3.2. Polaris Snowmobile Models:

• Switchback Assault 800 (2015-2016)
• Switchback Assault 600 (2015-2016)
• Rush 800 Pro R (2012-2013)
• Rush 600 Pro R (2012)
• Rush 600 (2010-2012)
• RMK Assault 800 (2014-2015)
• RMK 800 155 (2015)
• RMK 600 144 (2015)
• Pro RMK 800 LE 155 (2015)
• IQ Turbo (2011)
• Indy 800 SP (2015)
• Indy 600 (2015)
• Dragon IQ Turbo (2010)
• Dragon 800 (2010)

4. Safety Information

Always prioritize safety during installation and operation. It is recommended that installation be performed by a qualified professional. Ensure all fasteners are tightened to the manufacturer's specifications. Regularly inspect the handguards and mounting brackets for any signs of wear or damage. Replace components as necessary to maintain optimal protection.

5. Installation Guide

Follow these steps to install your M MATI Handguard Mount Brackets Kit. Refer to the provided videos for visual guidance.

5.1. Assemble the Handguard and Bracket

1. Identify the left and right handguard shells and their corresponding mounting brackets.
2. Align the mounting bracket with the designated holes on the handguard shell.
3. Insert the provided bolts and washers, securing the bracket to the handguard. Do not fully tighten at this stage.

5.2. Mount to Handlebar

1. Position the assembled handguard and bracket onto the handlebar, ensuring proper alignment with the brake or clutch lever.
2. Secure the bracket to the handlebar using the provided hardware. Ensure the handguard is at an appropriate height and angle for optimal protection and rider comfort.
3. Once satisfied with the positioning, fully tighten all screws and bolts.

5.3. Installation Videos

For detailed visual instructions, please watch the following installation videos:

6. Operating Instructions

Once properly installed, the handguard mount brackets require no specific operational steps. They function passively by holding the handguards in place, providing continuous protection during vehicle operation. Ensure that the handguards do not interfere with the operation of brake levers, throttle, or other handlebar controls.

7. Maintenance

To ensure the longevity and effectiveness of your M MATI Handguard Mount Brackets Kit, follow these maintenance guidelines:

• Regular Inspection: Periodically check all mounting bolts and screws for tightness. Vibrations from vehicle operation can cause fasteners to loosen over time.
• Cleaning: Clean the brackets and handguards with mild soap and water. Avoid abrasive cleaners or solvents that could damage the finish.
• Damage Check: Inspect the brackets for any cracks, bends, or corrosion. If any damage is found, replace the affected components immediately to prevent failure.

8. Troubleshooting

If you encounter any issues with your handguard mount brackets, consider the following:

• Loose Handguards: If handguards feel loose, re-tighten all mounting bolts. Ensure washers are correctly placed.
• Interference with Controls: If handguards interfere with brake/clutch levers or other controls, loosen the mounting bolts, adjust the position of the handguard and bracket, and then re-tighten.
• Missing Parts: If any parts were missing from the package, contact customer service immediately for assistance.

9. Specifications

10. Warranty & Support

M MATI provides product service for this Handguard Mount Brackets Kit. If there is any product problem within 1 year of purchase, please contact us for assistance. Ensure to check the fitment details before placing an order to avoid compatibility issues.