1. Introduction
Thank you for choosing the Faber HOOD CYGNUS IN 3D HC SC FL BK 60 Kitchen Chimney. This appliance is designed to provide an oil and smoke-free kitchen environment through efficient air extraction. This manual contains important information regarding the installation, operation, maintenance, and troubleshooting of your chimney. Please read it thoroughly before using the appliance and retain it for future reference.
2. Safety Instructions
- Ensure the chimney is installed by a qualified technician according to local regulations and this manual.
- Always disconnect the power supply before cleaning or performing any maintenance.
- Do not operate the chimney if the power cord is damaged. Contact authorized service personnel for repairs.
- This appliance is for domestic use only. Do not use it for commercial or industrial purposes.
- Maintain adequate ventilation in the room when the chimney is used simultaneously with gas or other fuel-burning appliances.
- Do not flambé under the chimney.
- Ensure children are supervised and do not play with the appliance.
- Regular cleaning of the oil collector is essential to prevent fire hazards and maintain performance.
3. Product Overview
The Faber HOOD CYGNUS IN 3D HC SC FL BK 60 is a 60 cm angular kitchen chimney featuring a powerful 1500 m³/hr suction capacity, filterless technology, touch control, and motion sensing for convenient operation. It is designed to effectively remove smoke and odors from your cooking area.
Key Features:
- Motion Sensing Technology: Operate the chimney with a simple wave of your hand.
- Touch Control: Intuitive touch panel for easy operation.
- Filterless Technology: Reduces cleaning hassles and maintenance costs.
- Auto Clean Function: Self-cleaning mechanism for oil particles, enhancing lifespan and reducing manual cleaning frequency.
- LED Soft Light: Provides clear illumination over the cooking area.
- High Suction Capacity: 1500 m³/hr for effective smoke and odor removal.
Components:
- Chimney Unit
- Ducting Pipe (if applicable, check installation kit)
- Oil Collector
- Mounting Brackets and Screws
- User Manual
Figure 1: Front view of the Faber HOOD CYGNUS IN 3D HC SC FL BK 60 Kitchen Chimney, showcasing its angular design and control panel.
Figure 2: Detailed view of the touch control panel, showing power, speed settings (1, 2, 3), light, auto-clean, and motion sensor indicators.
Figure 3: Illustration of operating the chimney using an infrared remote control for added convenience.
4. Setup and Installation
The Faber HOOD CYGNUS IN 3D HC SC FL BK 60 is a wall-mounted chimney. Professional installation is highly recommended to ensure proper functioning and safety.
General Installation Guidelines:
- Site Preparation: Ensure the wall is strong enough to support the chimney's weight (approximately 12 kg). The installation height above the cooking hob should comply with manufacturer recommendations (typically 65-75 cm for electric hobs and 70-80 cm for gas hobs).
- Mounting: Securely attach the mounting brackets to the wall using appropriate fasteners. Lift the chimney unit and carefully place it onto the brackets.
- Ducting: Connect the exhaust outlet of the chimney to an external vent using a suitable ducting pipe. Ensure the ducting is as short and straight as possible to maximize suction efficiency. Avoid sharp bends.
- Electrical Connection: Connect the chimney to a grounded power outlet (230 Volts). Ensure the electrical supply matches the appliance's requirements.
- Final Checks: After installation, verify all connections are secure and the chimney is level. Test all functions before regular use.
Figure 4: Side profile of the chimney, illustrating its wall-mounted design and compact structure.
5. Operating Instructions
Your Faber chimney offers multiple ways to control its functions.
Touch Control Panel:
- Power On/Off: Touch the power symbol to turn the chimney on or off.
- Fan Speed Adjustment: Select from 3 available fan speeds (1, 2, 3) by touching the corresponding number. Speed 1 is for light cooking, Speed 3 for heavy frying or grilling.
- Light Control: Touch the light symbol to turn the LED lights on or off.
- Auto Clean: Touch the auto-clean symbol to activate the self-cleaning cycle. The chimney will automatically clean oil particles and collect them in the oil collector.
Motion Sensing:
Wave your hand in front of the designated motion sensor area (refer to Figure 2 for sensor location) to activate or adjust certain functions, typically power on/off or fan speed. Consult the specific motion gesture guide in the included printed manual for detailed instructions.
Remote Control:
Use the provided remote control to operate the chimney from a distance. The remote typically includes buttons for power, fan speed, light, and auto-clean functions.
6. Maintenance and Cleaning
Regular maintenance ensures the longevity and optimal performance of your Faber chimney.
Oil Collector Cleaning:
The filterless technology directs oil and grease into a dedicated oil collector. This collector should be emptied and cleaned regularly, depending on cooking frequency. To clean:
- Ensure the chimney is switched off and disconnected from power.
- Locate and carefully remove the oil collector.
- Empty the collected oil and wash the collector with warm soapy water. Rinse thoroughly and dry completely before reinserting.
Exterior Cleaning:
- Wipe the exterior surfaces of the chimney with a soft cloth dampened with mild detergent.
- Do not use abrasive cleaners, steel wool, or harsh chemicals, as these can damage the finish.
- For stainless steel parts, use a specialized stainless steel cleaner.
Auto Clean Function:
The intelligent feature notifies users to switch on the Auto Clean function. Activate this function periodically to ensure internal components are free from oil and grease buildup, which helps maintain suction power.
Figure 5: Illustration highlighting the internal auto-clean mechanism, designed to prevent downtime and maintain efficiency.
7. Troubleshooting
Before contacting customer service, please refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chimney not turning on | No power supply; loose connection; faulty switch | Check power outlet and circuit breaker. Ensure power cord is securely plugged in. |
| Low suction power | Oil collector full; blocked ducting; incorrect fan speed | Empty and clean the oil collector. Check ducting for obstructions. Increase fan speed. |
| Excessive noise | Loose parts; motor issue; improper installation | Check for loose screws or components. If noise persists, contact service. |
| Lights not working | Faulty LED bulb; electrical issue | Check power supply. If individual LED is faulty, contact service for replacement. |
If the problem persists after attempting these solutions, please contact Faber customer support.
8. Specifications
| Specification | Detail |
|---|---|
| Model | HOOD CYGNUS IN 3D HC SC FL BK 60 |
| Size | 60 cm |
| Suction Capacity | 1500 m³/hr (Cubic Meters Per Hour) |
| Noise Level | 58 Decibels |
| Mounting Type | Wall Mount |
| Controls Type | Touch, Motion Control |
| Voltage | 230 Volts |
| Number of Speeds | 3 |
| Light Source Type | LED |
| Filter Type | Filterless |
| Annual Energy Consumption | 180 Kilowatt Hours Per Year |
| Item Weight | 12 kg |
| Product Dimensions (LxWxH) | 41.5 x 65 x 47 Centimeters |
| Color | Black |
9. Warranty and Support
Your Faber HOOD CYGNUS IN 3D HC SC FL BK 60 Kitchen Chimney comes with a comprehensive warranty:
- Product Warranty: 1 year
- Motor Warranty: 5 years
For warranty claims, technical assistance, or service requests, please contact Faber customer support. Ensure you have your purchase receipt and product model number available when contacting support.
Manufacturer: Franke Faber India Pvt Ltd
