Tihilgam Rechargeable Fly Fan (Model QCFF4P) Instruction Manual

1. Introduction

Thank you for choosing the Tihilgam Rechargeable Fly Fan. This innovative device is designed to keep flies and other flying insects away from your food and dining areas, both indoors and outdoors. Featuring soft, holographic blades, a colorful LED light, and a rechargeable battery, this fan provides an effective and safe solution for a more enjoyable dining experience. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your fly fan.

2. Product Features

• Safe and Effective: Keeps food and drinks clean and fresh by deterring flies without chemicals.
• Rechargeable: Equipped with a USB rechargeable battery for convenient power on the go.
• Foldable Design: Lightweight and easily foldable for compact storage and portability, ideal for camping or picnics.
• Colorful LED Light: Features an LED light ball on top that rotates through various colors, adding ambiance to your gatherings.
• Soft Blades with Stop-on-Contact Safety: Upgraded holographic strip blades are soft and designed to halt instantly upon contact with any object, resuming operation once the obstacle is removed. This ensures safety for hands, children, and pets.

Image: Soft, flexible, holographic blades with stop-on-contact protection.

Image: Fly fan with colorful LED light, enhancing outdoor activities.

3. Package Contents

Each Tihilgam Rechargeable Fly Fan (4 Pack) includes:

• 4 x Tihilgam Fly Fan Units (Model QCFF4P)
• 4 x Soft Holographic Blades
• 4 x USB Charging Cables

Image: Package contents showing the fan unit, USB cable, and compatible charging sources.

4. Setup

1. Charge the Unit: Before first use, fully charge the fan using the provided USB cable. The charging port is located on the side, at the bottom of the unit. A red indicator light typically glows while charging and turns off when fully charged (note: some units may vary in indicator light behavior).
2. Extend the Fan: Grasp the upper section of the fan and gently extend it upwards until you hear a "click" from each section joint, indicating it is fully extended.
3. Insert Blades: Carefully insert the soft holographic fan blades into the top spindle of the fan unit. Ensure they are securely attached.
4. Placement: Place the fan on a flat surface near your food or dining area. For overhead deterrence, utilize the hidden hook on the bottom to hang the fan upside down.

Image: Visual guide for charging, extending, and operating the fan.

Image: Fan with hidden hook for hanging, offering multiple usage options.

5. Operating Instructions

1. Power On/Off: Locate the power button on the bottom of the fan unit. Press the button once to turn on the fan and activate the rotating blades.
2. Activate LED Light: Press the power button a second time to turn on the colorful LED light. The light will cycle through various colors, adding a decorative element.
3. Turn Off: Press the power button a third time to turn off both the fan and the LED light.
4. Safety Feature: The soft blades are designed to stop immediately if they encounter an obstruction, such as a hand or other object. They will resume spinning once the obstruction is removed.

6. Charging

The Tihilgam Fly Fan is equipped with a rechargeable battery. Use the provided USB charging cable to power the device. You can connect the USB cable to various power sources:

• Laptop USB port
• Mobile power bank
• Car charger USB port
• Standard USB wall adapter

A full recharge typically takes approximately 3 hours and provides about 4 hours of operation. The charging indicator light (if present) will glow red during charging and turn off when the battery is full. Please note that indicator light behavior may vary between individual units.

7. Safety Information

• Always ensure the fan blades are properly installed before operation.
• Do not attempt to force the blades to spin if they are obstructed. The soft-stop feature is designed to prevent injury.
• Keep the charging port dry and free from debris.
• Do not immerse the fan unit in water or expose it to excessive moisture.
• Keep out of reach of small children when not in use, despite the soft blades.

8. Maintenance

• Cleaning: Wipe the fan unit and blades with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage: When not in use, collapse the fan unit and remove the blades for compact storage. Store in a cool, dry place away from direct sunlight.
• Battery Care: To prolong battery life, avoid completely draining the battery frequently. Charge the unit regularly, even if not in constant use.

9. Troubleshooting

• Fan Not Turning On: Ensure the unit is fully charged. Check the power button for proper function.
• Blades Not Spinning or Slow: Verify that the blades are correctly inserted and not obstructed. If the fan runs slower than expected, it may require charging. Some units may have variations in motor speed.
• Charging Indicator Light Issues: Some units may exhibit inconsistent behavior with the charging indicator light (e.g., always red, or never glowing). This does not necessarily indicate a fault if the unit charges and operates correctly.
• Charging Port Damage: If the charging port appears loose or damaged, discontinue use and contact customer support.

10. Specifications

11. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact Tihilgam customer service directly. Keep your purchase receipt for any warranty claims.