JBL PartyLight Beam Bluetooth Projection Party Light User Manual

Introduction

This manual provides detailed instructions for the JBL PartyLight Beam, a Bluetooth projection party light designed to enhance your audio experience with dynamic visual effects. Please read this manual thoroughly before using the product to ensure proper operation and to maximize its features.

Important Safety Information

• Read these instructions carefully.
• Keep these instructions for future reference.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Only use attachments/accessories specified by the manufacturer.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
• The product is rated for 120 volts.

Package Contents

Verify that all items are present in your package:

• 1 x JBL PartyLight Beam
• 1 x Power Cord
• 1 x Quick Start Guide
• 1 x Safety Sheet and Warranty Card

Product Features

• Automatic Sync: The JBL PartyLight Beam automatically syncs with the sound and lights of any Auracast enabled JBL PartyBox speaker.
• Room-Filling Projection: A single JBL PartyLight Beam can illuminate a room up to 400 square feet (40m²) with 20 watts of light shows.
• Choreographed Lightshow: Connect multiple JBL PartyLight Beams for a larger, synchronized light show using the built-in music detection algorithm.
• Built-in Microphone: Features a built-in microphone and music detection algorithm for automatic syncing to music beats, even without an Auracast enabled JBL PartyBox. Ensure music volume is sufficient for detection.
• Adjustable Settings: Customize motion, speed, and intensity levels to match the desired ambiance.
• JBL PartyBox App Control: Manage light show speed, colors, and patterns via the JBL PartyBox app.
• Easy On/Off: Rotate the light head to turn the unit on. Rotate it back to the original position to turn it off.

Setup

1. Unpack the Device: Carefully remove the JBL PartyLight Beam and all accessories from the packaging.
2. Power Connection: Connect the provided power cord to the JBL PartyLight Beam and then to a 120V power outlet.
3. Placement: Position the PartyLight Beam on a stable, flat surface. Adjust the angle of the light to direct the projection onto a wall or ceiling as desired.
4. Power On: Rotate the JBL PartyLight Beam from its off position to turn it on. The device will initiate its light sequence.

Image: The JBL PartyLight Beam in its operational state, showcasing its projection capabilities.

Operating Instructions

Basic Operation

• Power On/Off: Rotate the light head to turn the unit on. Rotate it back to the original position to turn it off.
• Manual Light Adjustment: Use the physical buttons on the device to cycle through basic light modes or adjust brightness. Refer to the quick start guide for specific button functions.

Syncing with JBL PartyBox Speakers (Auracast Enabled)

1. Ensure your JBL PartyBox speaker is powered on and Auracast enabled.
2. Power on the JBL PartyLight Beam.
3. The PartyLight Beam will automatically detect and sync with the PartyBox speaker's audio and light show.

Music Detection Mode (Without Auracast PartyBox)

If you do not have an Auracast enabled JBL PartyBox, the PartyLight Beam can still sync to music:

• Place the PartyLight Beam near your music source.
• Ensure the music is playing at a sufficient volume for the built-in microphone to detect the beat.
• The light will automatically adjust its patterns and intensity to the detected music.

Image: The JBL PartyLight Beam creating a room-filling light atmosphere during a gathering.

JBL PartyBox App Integration

For advanced control and customization, download the JBL PartyBox app:

1. Download the JBL PartyBox App from your device's app store.
2. Ensure Bluetooth is enabled on your mobile device.
3. Open the app and follow the on-screen instructions to connect to your JBL PartyLight Beam.
4. Within the app, you can adjust:
• Light show speed
• Colors
• Patterns
• Motion and intensity levels

Image: A user interacting with the JBL PartyBox app on a smartphone to control the light settings.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior of the JBL PartyLight Beam. Do not use abrasive cleaners or solvents.
• Storage: When not in use, store the device in a cool, dry place away from direct sunlight and extreme temperatures.
• Power Cord: Regularly inspect the power cord for any damage. If damaged, discontinue use and contact customer support.

Troubleshooting

Specifications

Image: Detailed dimensions of the JBL PartyLight Beam for reference.

Warranty and Support

Warranty: The JBL PartyLight Beam comes with a 1-year manufacturer's warranty. Please refer to the included warranty card for full terms and conditions.

Customer Support: For technical assistance, troubleshooting, or warranty claims, please visit the official JBL website or contact their customer service department. Keep your purchase receipt and product serial number handy.

Online Resources: For additional information, FAQs, and software updates, visit the JBL official website.