arboleaf 6D Neck Massager Instruction Manual

Introduction

The arboleaf 6D Neck Massager is designed to provide deep tissue shiatsu massage for pain relief and relaxation. Featuring advanced 6D mimic human hand massage technology, it targets various body areas including the neck, shoulders, back, and legs. This cordless massager offers customizable settings with heat, multiple modes, and adjustable intensity levels to enhance your well-being and comfort.

Important Safety Information

Please read all instructions carefully before using the arboleaf 6D Neck Massager. Failure to follow safety guidelines may result in injury or damage to the device.

• Do not use if you have a pacemaker, heart condition, or any other medical condition that may be affected by massage. Consult your physician before use.
• Do not use on swollen, inflamed, or injured areas of the skin.
• Keep out of reach of children. This device is not a toy.
• Do not immerse the massager in water or any other liquid.
• Avoid using the massager for prolonged periods (more than 15-20 minutes per session) to prevent overheating or muscle fatigue.
• Ensure the device is fully charged before first use.
• Do not attempt to disassemble or repair the massager yourself. Contact customer support for assistance.
• Always unplug the massager when not in use or before cleaning.

Package Contents

Verify that all items are present in the package:

• arboleaf 6D Neck Massager
• USB Charging Cable
• User Manual

Image: The arboleaf 6D Neck Massager, USB cable, and user manual are neatly packaged in a gift box, ready for use.

Product Overview

The arboleaf 6D Neck Massager features an ergonomic design with advanced massage nodes and intuitive controls.

Image: The arboleaf 6D Neck Massager showcasing its U-shaped design, control panel on the right strap, and the massage nodes with visible heat.

Key Features:

• 6D Mimic Human Hand Massage: Replicates the actions and pressure of real hands for an authentic massage experience.
• Flexible Massage Heads: Extended silicone massage heads designed to deeply relax trapezius muscles.
• Hands-Free Design: Allows for multitasking while receiving a massage, with adjustable straps for secure fit.
• Heat Function: Two adjustable heat levels (37-45°C / 98.6-113°F) to soothe muscles and enhance relaxation.
• Multiple Modes & Intensity: Three massage modes and three adjustable speeds for personalized comfort.
• Cordless & Portable: Equipped with a large capacity 1800mAh x 2 battery for up to 90 minutes of wireless use.
• Removable & Washable Liner: Skin-friendly material with a zippered cover for easy cleaning.
• 10-Minute Auto-Off: Automatic shut-off feature for safety and energy saving.

Image: Detailed view of the upgraded 6D massage heads, showing their human-like massage capability, silicone material, and the powerful brushless motor.

Setup

1. Initial Charge: Before first use, fully charge the massager using the provided USB Type-C cable. The charging port is located on the side of the control panel. A full charge typically takes approximately several hours.
2. Familiarize with Controls: Locate the control panel on the right strap of the massager. It includes buttons for Power ON/OFF, Mode selection, Intensity adjustment, and Heat levels.
3. Adjust Straps: The massager features adjustable shoulder straps with a buckle at the back. Adjust the strap length to ensure a comfortable and secure fit around your neck and shoulders. The maximum length of the shoulder strap is 27.5cm (10.8 inches).

Image: Illustration of how to adjust the shoulder strap and secure the massager for a comfortable fit, including a close-up of the buckle.

Operating Instructions

Wearing the Massager:

The arboleaf massager can be used in two primary ways:

• Backpack Style (Hands-Free): Place the massager over your neck and shoulders. Secure the adjustable strap across your chest or back using the buckle. This allows you to move freely while receiving a massage.
• Handheld Style: For more targeted pressure, hold the straps with your hands and apply gentle pressure to guide the massage nodes to specific areas.

Image: A woman demonstrating the hands-free design of the massager, allowing her to use her phone while receiving a neck massage.

Using the Control Panel:

Image: A close-up of the control panel on the massager's strap, showing the power, mode, intensity, and heating buttons.

• Power ON/OFF: Press the power button (⏻) to turn the massager on or off.
• Mode Selection: Press the mode button (M) to cycle through 3 different massage modes.
• Intensity Adjustment: Press the intensity button (|||) to select from 3 adjustable speeds/intensities.
• Heat Function: Press the heat button (♨) to activate or adjust the 2 heating levels.

The massager is designed for use on various body parts, including the neck, shoulders, back, waist, thighs, and legs. Its flexible design allows it to conform to different body contours.

Image: Visual demonstration of the massager being used on the shoulders & neck, waist, thighs, and legs, highlighting its versatility.

Official Product Video:

Charging

The arboleaf 6D Neck Massager is equipped with two 1800mAh batteries, providing up to 90 minutes of continuous massage on a single charge. It features a convenient Type-C charging port.

• Connect the provided USB Type-C cable to the charging port on the massager.
• Plug the other end of the USB cable into a compatible USB power adapter (not included) or a computer USB port.
• The indicator lights on the control panel will show the charging status.
• Once fully charged, disconnect the cable. The massager cannot be used while charging.

Image: Details on the massager's Type-C charging port, battery capacity (1800mAh x 2), 90 minutes long-lasting use, and 10-minute auto-off feature.

Maintenance

Proper maintenance ensures the longevity and hygiene of your arboleaf 6D Neck Massager.

• Cleaning the Liner: The massager features a removable and washable liner. Unzip the cover to remove the inner lining. Hand wash the liner with mild soap and water, then air dry completely before reattaching.
• Cleaning the Main Unit: Wipe the main unit with a soft, damp cloth. Do not use abrasive cleaners or immerse the unit in water.
• Storage: Store the massager in a cool, dry place away from direct sunlight and extreme temperatures.

Image: Close-up view of the zippered cover and the removable, skin-friendly inner lining, emphasizing ease of cleaning.

Troubleshooting

Specifications

• Model Number: 850059066409
• Product Dimensions: 9.65 x 6.42 x 6.73 inches
• Item Weight: 3.2 Pounds
• Material: Polyester
• Power Source: Battery Powered (1 Lithium Ion battery included)
• Battery Capacity: 2 x 1800mAh
• Usage Time: Up to 90 minutes (approx.)
• Auto-Off Timer: 10 minutes
• Heat Levels: 2 (37-45°C / 98.6-113°F)
• Massage Modes: 3
• Intensity Levels: 3
• Recommended Use Areas: Neck, Shoulder, Back, Legs, Thigh
• Manufacturer: arboleaf
• Country of Origin: China

Warranty & Support

For warranty information or technical support, please contact arboleaf customer service through the retailer's platform or visit the official arboleaf website. Keep your purchase receipt as proof of purchase for any warranty claims.

You can visit the arboleaf store for more products and information: arboleaf Store