ECHTPower Wireless Controller User Manual

Introduction

Thank you for purchasing the ECHTPower Wireless Controller. This controller is designed to enhance your gaming experience across multiple platforms, including Nintendo Switch, PC, Android, and iOS devices. Featuring Hall Effect joysticks for precise control, customizable RGB lighting, programmable back buttons, and adjustable vibration, this manual will guide you through its setup, operation, and maintenance.

Figure 1: ECHTPower Wireless Controller in Classic Gray.

Package Contents

• 1 x ECHTPower Wireless Controller (Model: ES01GY)
• 1 x USB-C Charging Cable
• 1 x User Manual (this document)

Controller Layout

Figure 2: Front view of the controller showing buttons and joysticks.

• 1. Left Analog Stick: Hall Effect joystick for precise movement.
• 2. D-Pad: Directional pad for navigation.
• 3. Minus (-) Button: System function button.
• 4. Screenshot Button: Capture in-game screenshots.
• 5. Home Button: Return to the system home screen.
• 6. Plus (+) Button: System function button.
• 7. A/B/X/Y Buttons: Standard action buttons.
• 8. Right Analog Stick: Hall Effect joystick for camera control or aiming.
• 9. M Button: Macro programming button.
• 10. Turbo Button: Activate/deactivate turbo function.
• 11. L/R Buttons: Shoulder buttons.
• 12. ZL/ZR Buttons: Trigger buttons.
• 13. MR/ML Buttons: Programmable back buttons.
• 14. USB-C Port: For charging and wired connection.

Figure 3: Back view of the controller highlighting the MR and ML programmable buttons.

Setup and Connection

Charging the Controller

Before first use, fully charge the controller. Connect the included USB-C cable to the controller's USB-C port and the other end to a USB power source (e.g., console, PC, USB wall adapter). The LED indicators will show charging status and turn off when fully charged. A full charge provides approximately 10-16 hours of continuous gameplay.

Connecting to Nintendo Switch

1. From the HOME Menu, select "Controllers" > "Change Grip/Order".
2. On the controller, press and hold the Home button for 3 seconds until the LED indicators start flashing rapidly.
3. Once connected, the corresponding player LED(s) on the controller will light up solid.
4. To wake up the Switch console from sleep mode, press the Home button on the controller.

Note: This controller cannot wake up the Switch2 console.

Figure 4: The controller is compatible with Nintendo Switch and other platforms.

Connecting to PC (Windows)

• Wireless (Bluetooth):
  1. Ensure your PC has Bluetooth enabled.
  2. On the controller, press and hold the Home button for 3 seconds until the LED indicators flash rapidly.
  3. On your PC, go to Bluetooth settings and select "Add device" or "Add Bluetooth or other device".
  4. Select "Bluetooth" and choose "Pro Controller" or "Wireless Controller" from the list.
  5. Once paired, the LED indicators will stop flashing and remain solid.
• Wired (USB-C):
  1. Connect the controller to your PC using the USB-C cable.
  2. The controller will be automatically recognized as a gamepad.

Connecting to Android/iOS Devices

1. Enable Bluetooth on your Android or iOS device.
2. On the controller, press and hold the Home button for 3 seconds until the LED indicators flash rapidly.
3. On your device, search for Bluetooth devices and select "Pro Controller" or "Wireless Controller" to pair.
4. Once paired, the LED indicators will stop flashing and remain solid.

Operating Instructions

Hall Effect Joysticks

The controller features advanced Hall Effect joysticks, which use magnetic sensors instead of traditional mechanical contacts. This design significantly reduces stick drift, enhances precision, and increases durability compared to conventional joysticks.

Figure 5: Hall Effect joysticks offer enhanced precision and durability.

RGB Lighting Adjustment

The analog sticks are equipped with RGB LED lights that can display 9 different colors. You can customize the lighting effects:

• Single Color Mode: Press and hold the Light button (usually located near the back buttons or on the front face) to cycle through the 9 available colors. Release the button to select your desired color.
• Breathing Mode: Continue pressing the Light button to activate breathing mode, where colors gradually change.
• Turn Off Lights: Press and hold the Light button until the lights turn off.

Programmable Back Buttons (MR/ML) and Macro Function

The MR and ML back buttons can be programmed to single buttons or complex macros, providing a competitive edge and reducing hand fatigue.

1. Single Button Assignment:
   1. Press the M button once. The LED indicators will flash slowly.
   2. Press the back button you wish to program (MR or ML). The LED indicators will flash rapidly.
   3. Press the button you want to assign (e.g., A, B, X, Y, L, R, ZL, ZR, D-Pad directions, or analog stick clicks).
   4. Press the back button (MR or ML) again to confirm. The LED indicators will stop flashing.
2. Macro Recording:
   1. Press and hold the M button for 3 seconds until the LED indicators flash rapidly.
   2. Press the back button you wish to program (MR or ML).
   3. Input the sequence of buttons you want to record (e.g., A, B, X, Y, then release).
   4. Press the M button again to save the macro. The LED indicators will stop flashing.
3. Clear Assignment/Macro:
   1. Press the M button once. The LED indicators will flash slowly.
   2. Press the back button (MR or ML) you want to clear.
   3. Press the M button again. The LED indicators will stop flashing, and the assignment/macro will be cleared.

TURBO Continuous Fire Function

The TURBO function allows for rapid, continuous input of a button press, reducing the need for repeated presses.

1. Activate TURBO: Press and hold the Turbo button, then press the desired action button (e.g., A, B, X, Y, L, R, ZL, ZR). The button will now continuously fire as long as you hold it down.
2. TURBO Hold Mode: To activate continuous fire without holding the button, press the Turbo button, then press the desired action button, and then press the Turbo button again. The button will now continuously fire on its own.
3. Adjust TURBO Speed: While in TURBO mode, press and hold the Turbo button and move the Right Analog Stick Up/Down to cycle through 3 different speeds (slow, medium, fast).
4. Deactivate TURBO: Press and hold the Turbo button, then press the action button again. Alternatively, press the Turbo button and the action button twice to deactivate TURBO Hold mode.

Figure 6: The TURBO function simplifies rapid button presses during gameplay.

Vibration Adjustment

The controller features 4 levels of vibration intensity to match your preference and game immersion.

• To adjust vibration intensity, press and hold the Turbo button and move the D-Pad Up/Down.
• The vibration intensity will cycle through 4 levels: None, Low, Medium, High.

Figure 7: The controller's vibration motors provide immersive feedback.

6-Axis Gyro Sensor

The built-in 6-axis gyro sensor allows for precise motion control in compatible games. This feature quickly detects the controller's tilt angle, providing intuitive and responsive gameplay, especially in titles that utilize motion aiming or steering.

Video Demonstration

Maintenance and Care

• Clean the controller regularly with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Avoid exposing the controller to extreme temperatures, direct sunlight, or high humidity.
• Do not disassemble the controller. This will void the warranty.
• Store the controller in a safe place when not in use to prevent damage.
• If the controller will not be used for an extended period, charge it at least once every three months to maintain battery health.

Troubleshooting

Specifications

Warranty and Support

ECHTPower products come with a standard manufacturer's warranty. For detailed warranty information, technical support, or customer service inquiries, please contact ECHTPower customer support through the retailer's platform or visit the official ECHTPower website.

Please retain your proof of purchase for warranty claims.