GEPLAD LED Night Light User Manual

Introduction

Thank you for choosing the GEPLAD LED Night Light. This manual provides essential information for the safe and efficient operation of your new night lights. Please read it thoroughly before use and retain it for future reference.

Image: A pack of four GEPLAD LED Night Lights, showcasing their compact, cylindrical design with a black matte finish and a white diffuser on top. Each light features a rotatable plug and a dimming slider on the side.

Product Features

• Dusk-to-Dawn Sensor: Automatically turns the light on when the room is dark and off when it's bright.
• Adjustable Brightness: Dimmable from 5 to 300 lumens (3000K soft white light) via a side slider.
• Rotatable Plug: Allows for vertical or horizontal orientation in outlets, directing light upwards and downwards.
• Compact Design: Designed to cover minimal outlet space, potentially leaving the second outlet free.
• Energy Efficient: LED technology for low power consumption.

Image: An infographic highlighting key features of the night light, including auto on/off, rotatable plug, 3000K soft white light, 5-300 lumens dimmable range, no flicker, and energy saving. Dimensions are shown as 3.46 inches (8.8cm) height, 1.88 inches (4.8cm) width, and 1.5 inches (3.8cm) depth.

Safety Instructions

• For indoor use only. Do not expose to water or moisture.
• Do not disassemble or modify the product.
• Keep away from children and pets.
• Ensure the outlet is clean and dry before plugging in the device.
• Do not use with extension cords or power strips unless specifically rated for such use.

Setup

Included Components:

• 4 x GEPLAD LED Night Lights

Installation:

1. Unpack the night light from its packaging.
2. Locate a standard 120V AC wall outlet in your desired indoor location (e.g., bedroom, hallway, bathroom).
3. Adjusting the Plug: If your outlet is horizontal, gently rotate the plug on the back of the night light 90 degrees to align with the outlet orientation. The plug is designed to rotate for optimal light direction (uplight and downlight).
   

   Image: An illustration demonstrating the 90-degree rotatable plug design. It shows how the night light can be adjusted to fit both vertical and horizontal wall sockets, ensuring the light always casts upwards and downwards.

4. Plug the night light firmly into the wall outlet. Ensure it is securely seated.

Operating Instructions

Automatic Operation (Dusk-to-Dawn Sensor):

The GEPLAD LED Night Light is equipped with a built-in dusk-to-dawn sensor. Once plugged in, the light will automatically turn on when the ambient light in the room falls below a certain level (e.g., at dusk or in a dark environment). It will automatically turn off when sufficient ambient light is detected (e.g., at dawn or when room lights are turned on).

Adjusting Brightness:

To adjust the brightness of the night light, locate the small slider switch on the side of the unit. Slide the switch up or down to increase or decrease the light output. The brightness can be adjusted continuously from 5 lumens (dim) to 300 lumens (bright).

Image: A visual representation of the night light's dimming capability, showing three different light intensities: 5 lumens (very dim), 150 lumens (medium), and 300 lumens (bright). A close-up of the side slider for smooth dimming is also included.

Maintenance

• Cleaning: Unplug the night light from the outlet before cleaning. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the unit in water.
• Storage: If storing the night light for an extended period, unplug it and keep it in a cool, dry place away from direct sunlight.
• Bulb Replacement: The LED light source is integrated and not user-replaceable.

Troubleshooting

Specifications

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact GEPLAD customer service through your retailer's support channels. Please have your model number (Night light 3000k) and purchase date available when contacting support.