1. Introduction
This manual provides essential instructions for the safe and efficient use of your Optonica M15-800lm Magnetic LED Track Light. Please read this manual thoroughly before installation and operation, and retain it for future reference.
The Optonica M15-800lm is a high-performance magnetic LED track light designed for accent lighting or creating an inviting atmosphere. It features a compact cylindrical design, providing 90° illumination.
2. Key Features
- Power Output: 10W electrical consumption for 800 lm luminous flux.
- Light Tone: Warm white light with a color temperature of 3000 K.
- Connectivity: Operates on DC48V for integration into various lighting systems.
- Dimensions: Compact design with a diameter of 45 mm and a height of 90 mm.
- Design: Cylindrical shape for 90° accent lighting.
- Lifespan: Estimated duration of 25,000 hours.
- Material: Polycarbonate (PC).
3. Installation and Setup
The Optonica M15-800lm LED track light is designed for easy installation due to its magnetic fastening system. It is intended for use with compatible magnetic track systems (sold separately).
3.1 Safety Precautions
- Ensure the power supply to the track system is disconnected before installation.
- Installation should be performed by a qualified electrician if you are unsure about electrical wiring.
- Do not exceed the maximum load capacity of your magnetic track system.
- Operate only with a DC48V power supply.
3.2 Installation Steps
- Ensure the magnetic track system is securely installed and powered off.
- Align the magnetic base of the M15-800lm LED track light with the track.
- Gently place the light onto the track. The magnetic system will secure it in place.
- Adjust the position and angle of the light as desired along the track.
- Once all lights are installed, restore power to the track system.
Figure 1: Optonica M15-800lm Magnetic LED Track Light. This image shows the compact cylindrical design of the LED light, ready for magnetic track installation.
4. Operation
Operating the Optonica M15-800lm Magnetic LED Track Light is straightforward:
- Ensure the light is correctly installed on a powered magnetic track.
- Use the wall switch or track system control (if applicable) to turn the power on or off.
- The light will illuminate instantly with a warm white light (3000 K).
5. Maintenance and Care
Regular maintenance ensures the longevity and optimal performance of your LED track light.
5.1 Cleaning
- Disconnect power to the track system before cleaning.
- Wipe the light fixture with a soft, dry, or slightly damp cloth.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or internal components.
- Ensure the light is completely dry before restoring power.
5.2 Recycling and Disposal
LED products contain electronic components and should be disposed of responsibly. Do not dispose of this product with household waste.
- For information on recycling this and other types of lamps, please refer to local recycling guidelines.
- Learn more about how to clean and dispose of broken or damaged lamps by consulting local waste management authorities or environmental protection agencies.
6. Troubleshooting
If you encounter issues with your Optonica M15-800lm LED track light, consider the following common solutions:
- Light does not turn on:
- Check if the power supply to the track system is active.
- Ensure the light is correctly seated and making proper contact with the magnetic track.
- Verify that the track system itself is receiving power.
- Flickering light:
- Ensure the light is securely attached to the track.
- Check for stable power supply to the track system.
- Confirm the track system's power supply is compatible with DC48V.
- If problems persist after checking these points, contact a qualified electrician or the product supplier for assistance.
7. Technical Specifications
| Feature | Specification |
|---|---|
| Brand | Optonica |
| Model Number | LN5224 |
| Power Consumption | 10 W |
| Luminous Flux | 800 lm |
| Color Temperature | 3000 K (Warm White) |
| Operating Voltage | DC48V |
| Dimensions (Diameter x Height) | Ø45 mm x 90 mm |
| Material | Polycarbonate (PC) |
| Estimated Lifespan | 25,000 hours |
| Energy Efficiency Class | F |
Figure 2: Energy Efficiency Label. This label indicates the energy efficiency class 'F' for the Optonica M15-800lm LED track light, with an energy consumption of 10 kWh/1000h. For more details, visit the EPREL database.
8. Warranty and Support
Specific warranty terms and conditions for the Optonica M15-800lm Magnetic LED Track Light are provided by the seller at the time of purchase. Please retain your proof of purchase for any warranty claims.
For technical support or further inquiries, please contact your retailer or the manufacturer, Optonica, directly. Contact information can typically be found on the product packaging or the seller's website.
