Product Overview
This manual provides detailed instructions for the assembly, operation, and maintenance of your Innoflame 55-inch Rustic Fireplace TV Stand. This media entertainment center is designed to accommodate TVs up to 65 inches and features a 23-inch electric fireplace heater, open storage shelves, and cabinet console table functionality. Please read all instructions carefully before assembly and use to ensure safe and proper operation.
Image: Fully assembled Innoflame 55-inch Rustic Fireplace TV Stand in Gray.
Safety Information
Your safety is paramount. Please adhere to the following safety guidelines:
- This unit is intended for use only with products and maximum weights indicated. Use with other products or products heavier than the maximum weights indicated may result in instability causing possible injury.
- Flat Panel TVs with base support should be placed squarely in the center of the stand with no overhang on any side.
- The fireplace heater is CSA/UL certified, ensuring compliance with safety standards.
- The TV stand is FSC & CARB certified, indicating responsible material sourcing and low formaldehyde emissions.
- Built-in thermal protection automatically shuts off power at high temperatures to prevent overheating, ensuring worry-free use around children and pets.
- Always ensure the unit is placed on a stable, level surface.
- Do not block the air vents of the fireplace heater.
- Keep flammable materials at least 3 feet (0.9 meters) away from the front of the fireplace heater.
Package Contents
Before beginning assembly, ensure all components are present and undamaged. Refer to the included parts list for verification.
- 1 x TV Stand (unassembled panels)
- 1 x Electric Fireplace & Logset (23-inch insert)
- 1 x Remote Control (requires 2 AAA batteries, not included)
- 1 bag x Hardware Screws and Fasteners
- 1 x Instruction Manual
Image: All components of the TV stand and fireplace heater laid out before assembly.
Assembly Instructions
Follow these steps carefully for proper assembly. It is recommended to have an assistant for certain steps.
Assembly Video Guide
Video: A comprehensive assembly instruction video for the Innoflame Fireplace TV Stand. This video demonstrates each step of the assembly process, from unpacking components to final adjustments, ensuring a smooth setup experience.
Step-by-Step Assembly Overview
- Prepare Components: Lay out all wooden panels, hardware, and the fireplace insert on a soft, clean surface to prevent scratches. Identify each part using the labels.
- Assemble Base Frame: Connect the bottom panels and side supports using the provided dowels and screws. Ensure all connections are secure.
- Install Fireplace Insert: Carefully place the 23-inch electric fireplace heater into its designated central compartment. Secure it with the appropriate screws as indicated in the manual.
- Attach Back Panels: Slide the back panels into the grooves, ensuring proper alignment. Secure them with screws.
- Construct Side Cabinets: Assemble the side cabinet frames, including any adjustable shelves.
- Mount Top Panel: Carefully align and attach the top panel to the assembled frame. Secure it using cam locks and screws.
- Install Doors: Attach the hinges to the cabinet doors and then mount the doors to the side cabinets. Adjust the hinges to ensure the doors open and close smoothly.
- Connect Wiring: Route the power cord for the fireplace heater through the designated cable management holes. Connect any internal wiring as instructed.
- Final Adjustments: Ensure all screws are tightened, and the unit is stable. Apply any adhesive covers to conceal screw heads.
Image: The fully assembled Innoflame Fireplace TV Stand, ready for use.
Operating Instructions
The 23-inch electric fireplace heater offers both aesthetic flame effects and functional heating.
Fireplace Heater Controls
- Power On/Off: Use the power button on the unit or remote control to turn the fireplace on or off.
- Flame Brightness: Adjust the flame effect to one of 4 levels (L1-L4) using the dedicated button on the unit or remote.
- Heater Function: Activate the infrared quartz heater for warmth. The heat output is 1500 Watts.
- Thermostat Control: Set the desired room temperature between 64°F and 82°F. The built-in thermostat will maintain the temperature.
- Timer Function: Utilize the 1-9 hour timer to automatically shut off the fireplace heater.
- Remote Control: All primary functions can be controlled via the included remote control. Ensure 2 AAA batteries are installed.
Image: Close-up of the 23-inch fireplace heater insert, showing the control panel and remote control for adjusting flame brightness, heat, and timer settings.
Image: The fireplace heater displaying its built-in thermostat feature, allowing temperature control between 64°F and 82°F.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your TV stand and fireplace heater.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners. The easy-to-clean surface simplifies upkeep.
- Dusting: Regularly dust the fireplace vents and interior to prevent dust buildup, which can affect performance.
- Electrical Check: Periodically inspect the power cord and plug for any signs of damage. Do not use if damaged.
- Hinge Adjustment: If cabinet doors become misaligned, adjust the metal hinges as needed to ensure smooth operation.
Image: Close-up showing the easy-to-clean surface and durable metal hinges of the TV stand.
Troubleshooting
If you encounter any issues, refer to the following common troubleshooting tips:
- Fireplace Not Turning On: Ensure the power cord is securely plugged into a working outlet. Check if the circuit breaker has tripped. Verify that the power button on the unit or remote is pressed.
- No Heat Output: Confirm the heater function is activated. Check the thermostat setting; if the room temperature is above the set temperature, the heater will not activate.
- Remote Control Not Working: Replace the AAA batteries in the remote control. Ensure there are no obstructions between the remote and the fireplace unit.
- Overheating Protection Activated: If the unit shuts off unexpectedly, the thermal protection may have been triggered. Unplug the unit, wait 10-15 minutes for it to cool down, and ensure vents are clear before plugging it back in.
- Loose Connections: If the stand feels wobbly, re-check all assembly screws and tighten them as necessary.
Specifications
| Feature | Detail |
|---|---|
| Brand | Innoflame |
| Model Name | W100-23KD-GW |
| Product Dimensions | 15.5"D x 55"W x 30.5"H |
| Material | Metal, Tempered Glass, Wood (MDF) |
| Finish Type | Wood |
| Color | Gray |
| Power Source | Corded Electric |
| Heat Output | 1500 Watts |
| Power Consumption | 1500 Watts |
| Special Features | Adjustable Flame, Overheat Protection, Remote control, Timer, TV Stand |
| Ventilation Type | Vent Free |
| Item Weight | 103.6 pounds (47 kg) |
| Maximum TV Size | Up to 65 inches |
| Maximum Top Weight Capacity | 75 lbs (34 kg) |
| Maximum Shelf Weight Capacity | 30 lbs (13.6 kg) |
| Batteries Required | 2 AAA batteries (for remote) |
| Certifications | CSA/UL certified (fireplace), FSC & CARB certified (TV stand) |
Image: Diagram illustrating the dimensions of the TV stand and its capacity for a 65-inch TV.
Warranty and Support
Your Innoflame product is covered by a 1-year warranty.
- Warranty Period: 1 Year from the date of purchase.
- Returns: Enjoy 30-day easy returns.
- Customer Support: For any questions, concerns, or warranty claims, please contact Innoflame customer support. Refer to the contact information provided with your purchase or visit the official Innoflame store on Amazon: Innoflame Store.
