Instruction Manual: Compatible Water Tank for Liectroux ZK901 Robot Vacuum Cleaner

1. Product Overview and Features

This water tank is designed as a compatible accessory for the Liectroux ZK901 Robot Vacuum Cleaner, enhancing its cleaning capabilities. It integrates with the vacuum cleaner to provide efficient wet cleaning and improved air quality.

• Wet Cleaning Function: Combines water with the vacuum's suction power for effective wet cleaning, removing stains and dust more efficiently. This is particularly useful for stubborn stains on various floor types.
• Odor Removal: Allows for the addition of a small amount of cleaner or disinfectant to help eliminate odors such as pet smells or sewage smells, contributing to fresher indoor air.
• Dust Filtering: Designed to prevent dust and dirt from being discharged back into the air, thereby avoiding secondary contamination. It immobilizes inhaled dust and dirt in the water, maintaining a high standard of cleanliness.
• Improved Indoor Air Quality: The combination of wet cleaning and filtration significantly reduces fine particles and pollutants, creating a more comfortable living environment.

2. Setup and Installation

Follow these steps to properly install the water tank into your Liectroux ZK901 Robot Vacuum Cleaner:

Image: The compatible water tank for Liectroux ZK901 Robot Vacuum Cleaner, showing the fill port and general shape. The image also displays a series of small diagrams and text outlining the installation steps.

1. Open the sealing plug, fill the tank with water, and then securely fasten the plug.
2. Insert the water tank into the cleaner. Ensure it is properly seated and confirm that the installation is in place.
3. Do not pull the water tank buckle forcefully to prevent breakage during installation or removal.
4. Place the mop into the pallet and close it securely.
5. Push the entire carriage horizontally into the bottom of the cleaner until it clicks into place.

3. Operating Instructions

Once the water tank is installed as described in Section 2, the robot vacuum cleaner can perform wet cleaning functions. Ensure the water tank is filled before each wet cleaning cycle. For optimal results, use clean water. If using a cleaning solution, ensure it is compatible with robot vacuum cleaners and diluted according to the solution's instructions to prevent damage to the tank or the vacuum.

4. Maintenance

• Empty and Clean After Each Use: After each wet cleaning cycle, empty any remaining water from the tank. Rinse the tank thoroughly with clean water to prevent residue buildup and mold growth.
• Air Dry: Allow the water tank to air dry completely before storing it or refilling it for the next use.
• Inspect for Damage: Periodically inspect the sealing plug and the tank for any signs of wear, cracks, or damage. Replace the tank if any significant damage is observed to prevent leaks.
• Mop Pad Care: Remove and clean the mop pad according to its specific instructions after each use.

5. Troubleshooting

• Water Leakage: If water leaks from the tank, ensure the sealing plug is securely fastened and the tank is correctly seated in the vacuum cleaner. Check for any cracks or damage to the tank itself.
• No Water Dispensing: Ensure the tank is filled with water and properly installed. Check if the mop pad is correctly attached.
• Tank Not Fitting: Verify that the tank is oriented correctly and pushed in horizontally until it clicks into place. Do not force it.

6. Specifications

7. Warranty and Support

Specific warranty information for this compatible water tank is not provided in the product details. For any warranty claims, technical support, or inquiries regarding this product, please contact the seller or manufacturer directly through your purchase platform.