1. Introduction
Thank you for choosing the BLNAN Dimmable Motion Sensor LED Ceiling Light. This 12-inch, 24W, 2400LM fixture is designed for versatile lighting applications, featuring radar motion sensing, adjustable color temperatures (3000K, 4000K, 5000K), and dimmable brightness (10%-100%) controlled by a remote. Its ultra-thin, low-profile design makes it suitable for various spaces, including closets, hallways, laundry rooms, porches, and stairs. This manual provides detailed instructions for safe installation, operation, and maintenance to ensure optimal performance.
Figure 1: BLNAN Dimmable Motion Sensor LED Ceiling Light with Remote Control.
2. Safety Information
Please read all safety instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Always turn off power at the circuit breaker before installing or servicing the fixture.
- This product is designed for 120V household electrical wiring. It is not wireless, battery-powered, or solar-powered.
- Installation should be performed by a qualified electrician if you are unsure about electrical wiring.
- The radar motion sensor may be affected by 5G WiFi signals. Install the light at least 3 meters (approximately 10 feet) away from switches and WiFi routers to prevent interference.
- Do not attempt to disassemble or modify the light fixture. There are no user-serviceable parts inside.
- Ensure the mounting surface is structurally sound and can support the weight of the fixture.
3. Package Contents
Verify that all components are present and undamaged upon opening the package:
- 1 x Motion Activated Ceiling Light
- 1 x Remote Control
- 1 x Hardware Mounting Package (screws, wire nuts, anchors)
- 1 x User Manual
Figure 2: Included components in the product package.
4. Product Features
The BLNAN Dimmable Motion Sensor LED Ceiling Light offers a range of advanced features:
- Highly Sensitive Radar Motion Sensing: Features a 360° microwave sensor enclosed within the fixture, providing high sensitivity to movement and light sources.
- Customizable Sensing Modes: Three modes available via remote control: Always ON, Motion Activated only (G Mode), or Motion Activated with Light Sensor (AUTO Mode), including a reset mode.
- 3 Color Temperatures and Adjustable Brightness: Select between 3000K (warm white), 4000K (natural white), and 5000K (cool white) via a toggle switch. Brightness is adjustable from 10% to 100% using the remote control.
- Ultra-Thin and Low-Profile Design: With a diameter of 12 inches and thickness of 0.62 inches, it is ideal for low ceilings, attics, and lofts.
- Easy Hardwired Installation: Designed for flush mount wired installation onto standard junction boxes (2.75" to 3.7" size range).
- Energy and Cost Saving: Automatic on/off functionality ensures energy efficiency and extended lifespan, saving up to 90% electricity compared to traditional bulbs.
- Wide Applications: Suitable for various indoor and outdoor spaces, including walk-in closets, hallways, stairways, entryways, porches, pantries, kitchens, basements, garages, and wet locations like laundry rooms and bathrooms.
5. Specifications
| Attribute | Value |
|---|---|
| Brand | BLNAN |
| Model Name | Ceiling Light |
| Model Number | LS-CL-I24W-M-DCCT (US-WH-1PC) |
| Size | 12inch 1pack |
| Product Dimensions | 12"L x 12"W x 0.99"H |
| Item Weight | 2.12 pounds |
| Color | White |
| Material | Plastic |
| Light Source Type | LED |
| Wattage | 24 watts |
| Brightness | 2400 Lumen |
| Voltage | 120 Volts |
| Color Temperatures | 3000K Warm White, 4000K Neutral White, 5000K Daylight White |
| Control Method | Remote Control |
| Installation Type | Flush Mount Wired Installation (Ceiling or Wall Mounting) |
| Water Resistance Level | Waterproof |
6. Installation
6.1 Before Installation
- Ensure the power is turned OFF at the circuit breaker before beginning installation.
- Gather necessary tools: screwdriver, wire strippers, electrical tape (not included).
- Confirm the junction box size is between 2.75" and 3.7" for proper fit.
6.2 Wiring and Mounting
The BLNAN ceiling light is designed for easy hardwired installation. Follow these steps:
- Prepare Wiring: Connect the light fixture's wires to your household electrical wiring (black to black, white to white, ground to ground) using the included wire nuts. Ensure connections are secure.
- Attach Mounting Plate: Secure the mounting plate to the junction box using the provided screws. Ensure the plate is firmly attached and level.
- Mount the Fixture: Align the light fixture with the mounting plate and twist to lock it into place. Ensure the fixture is flush with the ceiling.
- Finalize Installation: Once securely mounted, restore power at the circuit breaker. The light is now ready for operation.
Figure 3: Connecting the light fixture wires to the household wiring.
Figure 4: Securing the mounting plate to the junction box.
Figure 5: Twisting the light fixture onto the mounting plate.
Figure 6: The light fixture fully installed and ready for use.
Figure 7: Detailed diagram of the hardwired flush mount installation process, showing compatibility with junction boxes from 2.75 to 3.7 inches.
7. Operating Instructions
The BLNAN ceiling light offers various customizable settings via the included remote control.
7.1 Color Temperature Adjustment
The light features a physical toggle switch on the fixture itself to select one of three color temperatures: 3000K (Warm White), 4000K (Natural White), or 5000K (Cool White). This setting must be chosen during installation or by removing the fixture to access the switch.
Figure 8: Illustration of the three selectable color temperatures (3000K, 4000K, 5000K) and the stepless dimming capability from 10% to 100%.
7.2 Brightness Adjustment
Use the remote control to adjust the brightness from 10% to 100%. The remote provides dedicated buttons for increasing (DIM+) and decreasing (DIM-) brightness.
7.3 Sensing Modes and Hold Time
The remote control allows you to select from three sensing modes and set the hold time for the light to remain on after motion detection.
- Always ON Mode: Press the 'ON' button on the remote. The light will remain continuously on, functioning as a standard ceiling light.
- G Mode (Motion Activated Only): The light will turn on when movement is detected, regardless of ambient light conditions (day or night).
- AUTO Mode (Motion Activated with Light Sensor): The light will only activate upon motion detection when the ambient light is below a certain threshold (e.g., in darkness). This mode includes a 'Reset' function.
- Hold Time: Select the duration the light stays on after motion ceases: 5 seconds, 30 seconds, 1 minute, or 5 minutes.
Figure 9: Visual representation of the three sensing modes (AUTO, ON, G) and the four adjustable delay times (5s, 30s, 1min, 5min).
Figure 10: Detailed view of the remote control, highlighting buttons for ON/OFF, brightness adjustment, detection range, daylight sensor settings, and hold time.
7.4 Radar Sensor Functionality
The integrated radar sensor provides 360° detection and can sense movement through non-metallic objects such as thin walls, doors, and windows. This allows for activation even before entering the direct line of sight of the fixture.
Figure 11: The high-sensitivity radar sensor can detect motion through thin walls, doors, and windows, providing a 360° sensing angle.
Video 1: An overview of the BLNAN Radar Sensor Ceiling Light with Remote, demonstrating its features including color temperature selection, brightness adjustment, and various sensing modes. This video highlights the light's adaptability and smart functionality.
8. Maintenance
The BLNAN LED Ceiling Light requires minimal maintenance.
- Cleaning: To clean the fixture, ensure the power is off. Wipe the surface with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents.
- Bulb Replacement: The LED lights are integrated and not user-replaceable. The fixture is designed for a long lifespan.
9. Troubleshooting
If you encounter issues with your BLNAN ceiling light, refer to the following table for common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power; Incorrect wiring; Light sensor active (AUTO mode) and room is bright; Sensor not detecting motion. | Check circuit breaker; Verify wiring connections; Switch to G mode or test in a dark environment; Ensure motion is within detection range. |
| Light stays on continuously. | Set to 'Always ON' mode; Continuous motion detected; Sensor interference. | Switch to AUTO or G mode; Ensure no constant motion in detection area; Check for 5G WiFi interference (relocate if possible). |
| Light flickers or dims unexpectedly. | Unstable power supply; Loose wiring; Interference. | Consult an electrician to check power supply; Re-check wiring connections; Minimize sources of electrical interference. |
| Remote control not working. | Battery depleted; Obstruction between remote and light; Remote not paired (if applicable). | Replace remote battery; Ensure clear line of sight; Refer to remote pairing instructions in the manual (if provided). |
| Light turns on too easily (false triggers). | Sensor sensitivity too high; External factors (e.g., pets, vibrations, strong air currents). | Adjust sensor sensitivity via remote (e.g., to 25% detection range); Consider placement to minimize external triggers. |
10. Warranty and Support
This product is subject to Amazon's standard return policy, which typically allows for refunds or replacements within 30 days of purchase. For specific warranty details or technical support, please contact BLNAN customer service through the retailer's platform or the contact information provided in your product packaging. Please have your model number (LS-CL-I24W-M-DCCT (US-WH-1PC)) and purchase date ready when contacting support.
