GOCHIFIX Laser Level with Tripod User Manual

Introduction

Thank you for choosing the GOCHIFIX Laser Level with Tripod. This precision tool is designed to assist with various indoor projects, providing accurate horizontal and vertical lines for tasks such as picture hanging, tile installation, and construction. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

Package Contents

Please verify that all items listed below are included in your package:

• Green Cross Laser Level
• Extendable Tripod
• Portable Storage Bag
• 2 x AA Batteries
• User Manual

Image: Contents of the GOCHIFIX Laser Level package.

Product Features

• Green Laser Technology: Features a sharp 520 laser from Japan, offering twice the brightness of traditional red lasers. Working range up to 100ft with an accuracy of ±1/9 inch at 32.8 feet. Laser brightness is adjustable to two levels.
• Bonus Laser Level Tripod: The included tripod is adjustable in height from 8.34 inches to 23.6 inches, suitable for various needs. It features a stable pan head for tilt and multi-angle rotation, and a standard 1/4'' quick-release plate for easy setup.
• Self-Levelling Cross Line Laser Level: Automatically levels within ±4°. An alarm sounds if the tilt exceeds 4°.
• Manual Mode: Allows for multi-angle lock line projection when self-leveling is not required.
• Extended Operation Time: Powered by 2 AA batteries for seamless and continuous use, with easy battery replacement.
• Safety Protection Design: IP54 protection level ensures the device is waterproof, dustproof, and drop-proof. Features 80% large-area vinyl wrapping for enhanced durability.

Image: Demonstrating the sharp green laser diode and its working range.

Image: Illustrating the IP54 protection level of the laser level.

Setup

Battery Installation

1. Locate the battery compartment on the rear of the laser level.
2. Open the battery cover by sliding it or pressing the latch.
3. Insert 2 AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Close the battery cover securely.

Image: Battery compartment and battery insertion.

Tripod Assembly

1. Unfold the tripod legs and extend them to the desired height. Secure the leg locks.
2. Ensure the tripod head is level using the integrated bubble level indicator.
3. Attach the laser level to the tripod's 1/4'' quick-release plate by screwing it into the threaded mount on the bottom of the laser level.
4. Secure the quick-release plate to the tripod head.

Image: Tripod features and height adjustment.

Operating Modes

Self-Leveling Mode

This mode is ideal for applications requiring perfectly level or plumb lines. The device will automatically adjust itself within a ±4° range.

1. Slide the ON/OFF switch to the "unlocked" position (usually indicated by an open padlock icon or a specific symbol).
2. The laser will emit lines and self-level. If the device is tilted beyond ±4°, the laser lines will flash and an alarm may sound, indicating it is out of level. Adjust the device's position until the lines become stable and the alarm stops.
3. Press the power button briefly to cycle through horizontal line, vertical line, or both.

Manual Mode

Use this mode when you need to project lines at a specific angle, such as for staircase railings or decorative patterns.

1. Slide the ON/OFF switch to the "locked" position (usually indicated by a closed padlock icon or a specific symbol).
2. Press and hold the power button for approximately 3 seconds to activate the laser.
3. The laser lines will be locked, allowing you to tilt the device to any desired angle without triggering the out-of-level alarm.
4. Press the power button briefly to cycle through horizontal line, vertical line, or both.

Image: Visual guide for Self-Leveling and Manual Modes.

Maintenance

Proper maintenance ensures the longevity and accuracy of your laser level.

• Cleaning: Wipe the device with a soft, damp cloth. Do not use abrasive cleaners or solvents. Keep the laser emission windows clean for optimal visibility.
• Storage: When not in use, store the laser level in its portable storage bag in a dry, cool place, away from direct sunlight and extreme temperatures. Always ensure the pendulum is locked (switch in "locked" position) before storage or transport to prevent damage.
• Battery Care: Remove batteries if the device will not be used for an extended period to prevent leakage and damage.
• Calibration Check: Periodically check the calibration of your laser level by projecting lines against a known plumb or level surface. If significant deviation is observed, contact customer support.

Troubleshooting

If you encounter issues with your GOCHIFIX Laser Level, refer to the table below for common problems and solutions.

Specifications

Warranty and Support

GOCHIFIX stands behind the quality of its products. For warranty information, technical support, or any inquiries regarding your laser level, please refer to the contact information provided on the product packaging or visit the official GOCHIFIX website. Please retain your proof of purchase for warranty claims.