GETPRO Double Sliding Semi-Frameless Shower Door Instruction Manual

1. Product Overview

Thank you for choosing the GETPRO Double Sliding Semi-Frameless Shower Door. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new shower door. Designed for modern bathrooms, this door features 1/4 inch clear tempered glass, a durable aluminum frame, and a versatile reversible design to fit various bathroom layouts. Its anti-collision and water-repellent technologies ensure longevity and ease of use.

Figure 1: GETPRO Double Sliding Semi-Frameless Shower Door (Matte Black, 60'' W x 72'' H)

2. Setup and Installation

Professional installation is recommended for this shower door. Ensure all wall surfaces (tile, backer board, etc.) are finished before taking measurements. The width of the shower door can be adjusted from 57" to 60" by carefully cutting the guide rail.

2.1 Pre-Installation Checklist

• Verify all parts are present and undamaged according to the packing list.
• Ensure walls are plumb and level.
• Confirm shower base or tub is properly installed and level.
• Gather all necessary tools: electric drill, hammer, screwdriver, tape measure, glass glue, pencil, spirit level, knife, goggles, gloves, electric saw (for cutting guide rail if needed).

2.2 Installation Steps Overview

For a detailed, step-by-step visual guide, please refer to the official installation video below.

Key steps include:

1. Measure and Mark: Accurately measure the shower opening width at the top and bottom. Mark the positions for the wall profiles.
2. Install Wall Profiles: Drill pilot holes and secure the vertical wall profiles to the shower walls using appropriate fasteners. Ensure they are plumb.
3. Install Bottom Track: Measure and cut the bottom track to fit the shower opening. Apply silicone sealant and secure the track to the shower base, ensuring it is centered horizontally.
4. Install Top Track: Secure the top track to the wall profiles.
5. Attach Rollers to Glass Panels: Install the rollers and guides onto the tempered glass panels.
6. Hang Glass Panels: Carefully lift and hang the glass panels onto the top track rollers.
7. Install Door Handles: Attach the stainless steel handles to the glass panels.
8. Apply Sealant: Apply silicone sealant along all seams and edges to ensure a watertight seal. Allow 24 hours for the sealant to cure before using the shower.

Figure 2: Product Dimensions. Always measure your shower opening accurately before cutting any components.

3. Operation

The GETPRO Double Sliding Shower Door is designed for smooth and quiet operation. Both glass panels can slide, offering flexible entry and exit options.

• Smooth Sliding: The high-quality mute pulleys and tunnel-shaped rail ensure effortless and noiseless gliding of the glass panels.
• Reversible Design: The door's design allows for left or right wall installation, adapting to your bathroom layout.
• Anti-Collision: Buffer anti-crash corners are integrated on each side to protect the glass panels and reduce impact during opening and closing, ensuring quiet and safe use.

Figure 3: Double Sliding and Noiseless Operation. The design allows both panels to slide smoothly.

Figure 4: High-Class, Smooth, and Noiseless Mechanism. Features thickened aluminum, mute pulleys, and a tunnel-shaped rail.

4. Maintenance

To ensure the longevity and pristine appearance of your GETPRO shower door, follow these maintenance guidelines:

• Regular Cleaning: Use warm soapy water and a soft, damp cloth to clean the glass. Wipe dry with a clean cloth. Glass cleaner can be used if required.
• Avoid Harsh Cleaners: Do not use scourers, abrasives, or chemical cleaners as they can damage the glass and its protective nano-coating.
• Nano Coating: The protective nano-coating on both surfaces provides long-lasting protection against water-related stains and buildup, making cleaning easier.
• Hard Water Areas: In hard water areas, insoluble lime salts may deposit on the glass. Regular cleaning will minimize this effect.
• Check Moving Parts: Regularly inspect moving parts such as rollers and hinges to ensure they are secure and adjusted correctly. Tighten and adjust where required.
• Sealant Inspection: Check all sealed joints to ensure the seal has not deteriorated. Re-seal if necessary to prevent leaks.

Figure 5: Water Repellent Technology. The nano-coating simplifies cleaning and prevents water spots.

5. Specifications

Figure 6: Tempered Glass Certification. The 1/4 inch clear tempered glass meets ANSI safety standards.

Figure 7: Ultra Sturdy Aluminum Frame. Designed for durability, anti-corrosion, and non-deformation.

6. Troubleshooting

If you encounter any issues with your GETPRO shower door, please review the installation steps and ensure all components are correctly assembled and tightened. Common issues and their potential solutions include:

• Doors not sliding smoothly: Check the top and bottom tracks for obstructions or debris. Ensure rollers are clean and properly seated in the track. Verify the tracks are level.
• Water leakage: Inspect all silicone sealant lines for gaps or cracks. Ensure the bottom threshold is properly sealed and the glass panels are correctly aligned.
• Glass panel misalignment: Check the vertical wall profiles and top track for proper installation and levelness. Adjust as needed.

For persistent issues, please contact GETPRO customer support.

7. Warranty & Support

7.1 Manufacturer Warranty

The GETPRO Double Sliding Semi-Frameless Shower Door comes with a 2-Year Manufacturer Warranty. This warranty covers any product or parts proven to be defective, excluding man-made damage.

7.2 Customer Support

For any pre-sales or after-sales concerns, questions, or assistance, please do not hesitate to contact the GETPRO customer service team. They are dedicated to providing fast and considerate service to ensure your satisfaction.

Please refer to your purchase documentation or the GETPRO official website for specific contact details.