EUERTE K10mini

EUERTE K10mini Smart Keypad Door Knob User Manual

Model: K10mini

1. Introduction

Thank you for choosing the EUERTE K10mini Smart Keypad Door Knob. This manual provides essential information for the proper installation, operation, and maintenance of your new keyless entry door lock. Please read these instructions carefully before installation and keep them for future reference.

2. Safety Information

  • Do not attempt to disassemble or repair the product yourself. This may void the warranty and cause damage.
  • Use only the specified charging cable and power source for the built-in rechargeable battery.
  • Keep the product away from water and direct sunlight to prevent damage.
  • Ensure all components are securely fastened during installation to prevent malfunction.
  • Regularly check the battery level and recharge as needed to avoid being locked out.

3. Package Contents

  • Keypad Door Knob (Exterior Knob) x1
  • Interior Knob x1
  • Latch x1
  • Strike Plate x1
  • Mechanical Keys x2
  • Mounting Screws
  • Installation Guide

4. Product Overview

The EUERTE K10mini Smart Keypad Door Knob offers convenient keyless entry with multiple access options. It features a durable metal construction and a sleek design suitable for various indoor and outdoor applications.

EUERTE K10mini Smart Keypad Door Knob

Image: The EUERTE K10mini Smart Keypad Door Knob, showcasing its sleek black design and integrated keypad.

Interior knob with Normal, Passage, and Privacy mode settings

Image: The interior knob, highlighting the switch for Normal, Passage, and Privacy modes.

5. Installation

The EUERTE K10mini is designed for easy installation, typically within 15 minutes with a screwdriver. Ensure your door meets the following specifications:

  • Door thickness: 1.38-2.16 inches (35-55mm)
  • Backset: 2-3/8 inches (60mm) or 2-3/4 inches (70mm)
  • Door hole diameter: 2.13 inches (54mm)
Diagram illustrating door thickness and hole diameter requirements for installation

Image: Door measurement guide for proper fit.

Installation Steps:

  1. Install Latch and Strike Plate: Insert the latch into the door edge and secure it with screws. Install the strike plate on the door frame, aligning it with the latch.
  2. Install Exterior Knob: Insert the exterior knob into the door, ensuring the 'UP' mark on the rosette faces upward.
  3. Secure the Rosette: Place the lock rosette onto the door, aligning it with the exterior knob.
  4. Insert and Tighten Screws: Insert the mounting screws through the interior side and tighten them to secure the exterior knob and rosette.
  5. Install Interior Knob: Attach the interior knob, ensuring it aligns correctly with the internal mechanism. The knob should point to the circular mark above for normal function.

Installation Video Guide:

Video: Step-by-step guide for installing the EUERTE K10mini Smart Keypad Door Knob.

6. Operation

Adding Administrator Passwords (4-8 digits):

  1. Press the '0' button and then the '✓' (tick) button.
  2. Enter your new 4 to 8 digit administrator password and press '✓'.
  3. When the '✓' button turns green, re-enter the password and press '✓' again to confirm.
  4. The administrator password is now successfully added.

Adding User Passwords (4-8 digits):

  1. Press the '1' button and then the '✓' (tick) button.
  2. Enter your new 4 to 8 digit user password and press '✓'.
  3. When the '✓' button turns green, re-enter the password and press '✓' again to confirm.
  4. The user password is now successfully added.

Operating Modes:

The interior knob features a rotating button to switch between three modes:

  • Normal Mode: The door automatically locks after 5 seconds. Both administrator and user passwords can unlock the door.
  • Passage Mode: The door remains unlocked, allowing free entry and exit without needing a code.
  • Privacy Mode: Only administrator passwords or mechanical keys can unlock the door. User passwords will not work in this mode.
Normal Mode Smart Door Lock

Image: Illustration of Normal Mode with 5s auto-lock.

Passage Mode Smart Lock

Image: Illustration of Passage Mode for unlocked access.

Privacy Mode Smart Lock

Image: Illustration of Privacy Mode, restricting access to administrators only.

Anti-Peep Passcode:

To enhance security, you can enter random digits before or after your actual code. The lock will still recognize the correct sequence within the longer entry. For example, if your code is 1234, you can enter 56123478 and the lock will open.

Keypad door knob with anti-peep passcode example

Image: Example of using the anti-peep passcode feature.

Mute Mode:

To activate mute mode, press '4' then '✓'. This will silence the keypad beeps for quiet operation.

Keypad door knob demonstrating mute mode activation

Image: Visual representation of activating mute mode.

Operation Video Guide:

Video: Detailed user guide for operating the EUERTE K10mini Smart Keypad Door Knob, including code setup and mode changes.

7. Charging and Battery

The EUERTE K10mini features a built-in rechargeable lithium-ion battery. A full charge takes approximately 3 hours and provides up to 10-12 months of battery life under normal usage.

  • Low Battery Warning: The lock will provide an alert when the battery is low.
  • Emergency Power: In case of a completely drained battery, you can use a Type-C USB cable to connect an external power bank for emergency access.
Keypad door knob connected to a power bank for charging

Image: The smart door knob being charged via a Type-C USB connection.

8. Maintenance

  • Clean the keypad and knob surfaces with a soft, dry cloth. Avoid abrasive cleaners or solvents.
  • Do not lubricate the lock cylinder with oil-based lubricants; use graphite powder if lubrication is necessary.
  • Regularly check all screws and ensure they are tight.

9. Troubleshooting

  • Lock not responding: Check battery level and recharge if necessary. Ensure the interior knob is correctly aligned.
  • Codes not working: Verify that the correct code is being entered. Ensure the lock is not in Privacy Mode if using a user code. Try resetting the administrator password.
  • Door not locking/unlocking: Check for any obstructions in the door frame or latch mechanism. Ensure the latch is properly installed and aligned.
  • Keypad unresponsive: The battery might be completely drained. Use the mechanical key or emergency power via Type-C USB.

10. Specifications

FeatureDetail
BrandEUERTE
Model NumberK10mini
MaterialMetal
ColorBlack
Exterior FinishPolished Black Metal
Lock TypeKeypad (No App)
Password Length4-8 digits
Number of Codes3 Master, 17 Access
Battery1 Lithium Ion (included)
Battery LifeApprox. 10-12 months per charge
Charging PortType-C USB
Product Dimensions3.94 x 2.36 x 8.6 inches
Item Weight1.61 pounds
Hand OrientationAmbidextrous

11. Warranty and Support

EUERTE provides the following for your product:

  • 30-Day Hassle-Free Return Policy: Enjoy a worry-free return period.
  • 1-Year Product Coverage: The product is covered for one year from the date of purchase.
  • 24/7 Technical Support: Please feel free to contact us if you encounter any problems or require assistance.

For customer service, please refer to the contact information provided with your purchase or visit the official EUERTE website.

Related Documents - K10mini

Preview EUERTE S08T Smart Door Knob User Manual
User manual and installation guide for the EUERTE S08T Smart Door Knob, including setup, fingerprint registration, app connectivity, and troubleshooting.
Preview Euerte DF01T Smart Lock User Manual and Installation Guide
Comprehensive user manual and installation guide for the Euerte DF01T Smart Lock. Includes step-by-step instructions for installation, battery replacement, app setup, fingerprint management, troubleshooting, and technical specifications.
Preview WREO K10mini Smart Door Lock Installation and Operation Guide
Comprehensive guide for installing and operating the WREO K10mini smart door lock, covering setup, features, and troubleshooting. Learn how to charge, install, add passwords, and use various modes.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.