Introduction
Thank you for choosing the Ailun 3 Pack Tempered Glass Screen Protector for your iPhone 16 Pro Max. This product is designed to provide robust protection for your device's screen against scratches, scrapes, and impacts, while maintaining optimal touch sensitivity and display clarity. This manual provides detailed instructions for proper installation and care.
Image: Ailun 3 Pack Tempered Glass Screen Protector kit, including packaging, three screen protectors, and an orange alignment frame.
Installation Guide
Follow these steps carefully to ensure a bubble-free and perfectly aligned installation of your Ailun screen protector.
Compatibility Check
Ensure your device is the iPhone 16 Pro Max (6.9 inch). This screen protector is specifically designed for this model and is not compatible with other iPhone 16 variants (e.g., iPhone 16, iPhone 16 Pro, iPhone 16 Plus).
Image: Visual guide confirming compatibility with iPhone 16 Pro Max (6.9 inch) and incompatibility with other iPhone 16 models.
Step-by-Step Installation
- Clean the Screen: Use the provided wet wipe to thoroughly clean your iPhone screen, removing any dirt, smudges, or fingerprints.
- Dry the Screen: Follow with the dry wipe to ensure the screen is completely dry and free of any liquid residue.
- Remove Dust: Use the dust-absorber sticker to dab the screen surface, eliminating any remaining dust particles. Ensure the screen is completely dust-free before proceeding.
- Position the Installation Frame: Carefully place the orange installation frame onto your iPhone. This frame helps ensure perfect alignment of the screen protector.
- Prepare the Protector: Gently peel off the bottom protective layer from the tempered glass screen protector by pulling away the top rectangular tab. Ensure the sticky side faces down.
- Apply the Protector: Without touching the sticky side of the protector, carefully align the cutouts and edges with the installation frame. Slowly and gently drop the screen protector onto the screen.
- Finalize Application: Use your finger to gently slide across the center of the screen protector. The adhesive will automatically spread. Press down on any small bubbles towards the edges. Once applied, remove the installation frame. Your phone screen is now protected.
Image: Detailed visual instructions for screen protector installation.
Image: Illustration of the easy installation process using the alignment frame.
Product Features and Usage
The Ailun Tempered Glass Screen Protector offers several key features to enhance your iPhone 16 Pro Max experience:
- HD Ultra-Clear Clarity: Enjoy 99.99% high-definition transparency, ensuring your screen's original colors and brightness are preserved.
- High Touch Sensitivity: The 0.33mm ultra-thin design maintains the original response sensitivity and touch experience of your iPhone screen.
- Oleophobic Coating: A hydrophobic and oleophobic screen coating effectively protects against sweat and oil residue from fingerprints, keeping your screen clean.
- Sensor Protection: Designed to protect essential sensors without interfering with their functionality, including Face ID and the Dynamic Island.
- Case Friendly: Engineered to fit seamlessly with most phone cases, preventing lifting or interference.
- 9H Hardness: Provides maximum protection from scratches, scrapes, and bumps, with a surface hardness rating of 9H.
Image: Visual representation of the screen protector's key features.
Image: Emphasizing the ultra-clear HD clarity of the tempered glass.
Image: Demonstrating the precise fit of the screen protector on the iPhone screen.
Image: Illustrating the scratch-resistant and impact-absorbing properties of the screen protector.
Maintenance
To maintain the clarity and effectiveness of your Ailun screen protector, follow these simple maintenance tips:
- Regular Cleaning: Gently wipe the screen protector with a soft, lint-free cloth to remove dust and smudges. For stubborn marks, lightly dampen the cloth with water or a screen-safe cleaner.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, alcohol, or ammonia-based solutions, as these can damage the oleophobic coating.
- Handle with Care: While durable, avoid unnecessary sharp impacts or extreme pressure on the screen protector to prolong its lifespan.
Troubleshooting
Here are solutions to common issues you might encounter:
- Bubbles After Installation: Small bubbles can often be pushed out towards the edges using a soft cloth or a credit card wrapped in cloth. If large bubbles persist, it may indicate dust trapped underneath. In such cases, carefully lift a corner of the protector, remove the dust with a dust-absorber sticker, and reapply.
- Dust Under the Protector: This is the most common cause of bubbles. Ensure your installation environment is as dust-free as possible. Use the dust-absorber sticker meticulously before application.
- Misalignment: The included installation frame is designed to prevent misalignment. If the protector is significantly misaligned, gently lift it from a corner and reapply using the frame.
- Screen Protector Cracks: Tempered glass screen protectors are designed to absorb impact and crack themselves to protect your phone's original screen. If your screen protector cracks, it has performed its function. Replace it with one of the spares provided in the 3-pack.
- Reduced Touch Sensitivity: Ensure the screen protector is clean and free of moisture or oil. If the issue persists, verify the protector is correctly installed and not interfering with the screen's sensors.
Specifications
| Feature | Detail |
|---|---|
| Compatible Device | iPhone 16 Pro Max (6.9 Inches) |
| Material | Tempered Glass |
| Item Hardness | 9H |
| Product Dimensions | 6.26"L x 2.89"W (Protector), 6.2 x 3.2 x 0.5 inches (Package) |
| Item Weight | 3.17 ounces |
| Special Features | 9H Surface Hardness, HD Clarity, Oleophobic Coating, Sensor Protection, Case Friendly |
| Finish Type | Polished |
| Screen Surface Description | Glossy |
| Manufacturer | Ailun |
Warranty Information
Specific warranty details for Ailun products are typically provided with your purchase or can be found on the official Ailun website. Please refer to the packaging or the manufacturer's website for the most current warranty policy regarding defects or issues with the screen protector.
Customer Support
For further assistance, questions, or support regarding your Ailun screen protector, please visit the official Ailun website or contact their customer service directly. You can often find contact information on the product packaging or through the retailer where the product was purchased.
Visit the Ailun Store: Ailun Official Store
