Qimedo Q3 Electric Spin Scrubber User Manual

1. Important Safety Information

Please read and understand all instructions before using the Qimedo Q3 Electric Spin Scrubber. Retain this manual for future reference.

• Keep the device away from children.
• Do not immerse the main body of the scrubber in water. The brush head is IPX7 waterproof, but the battery handlebar is not designed for full immersion.
• Use only the provided charger and batteries.
• Do not operate the scrubber if any part is damaged.
• For stubborn stains, pre-soak the area with detergent for 3-5 minutes before using the scrubber.

2. Package Contents

Verify that all items are included in your package:

• Electric Spin Scrubber (main unit) x 1
• 21V 3000mAh Batteries x 2
• Battery Charger x 1
• Effortless Handle + Extension Handle x 1
• Replaceable Brush Heads x 8 (4 soft bristle, 4 cloth brushes)
• Hook x 1
• User Manual x 1
• Brush Head Bag x 1

3. Product Overview

The Qimedo Q3 Electric Spin Scrubber is designed for efficient and effortless cleaning with its powerful motor and versatile attachments.

Key Features:

• High RPM & Power: Features three modes (800 RPM, 1000 RPM, 1200 RPM) for various cleaning needs, powered by an upgraded double bearing system.
• Long-lasting Battery: Equipped with two 6000 mAh (total) batteries, offering up to 360 minutes of continuous use in low-speed mode after a 2.5-hour full charge.
• Extra Large Brush Head: A 5-inch large flat brush head covers wider areas, increasing cleaning efficiency.
• IPX7 Waterproof Brush Head: The brush head is fully sealed, allowing it to be immersed in water for thorough cleaning of bathtubs and other surfaces.
• Smart Display: An intelligent display shows remaining power percentage and current power mode. It also monitors battery health.
• Adjustable Handle & Head: The telescopic pole extends up to 50 inches, and the brush head can be adjusted 45° to clean hard-to-reach areas without bending or stretching.
• Multi-Angle Adjustment Effortless Handle: Reduces the perceived weight of the scrubber by 35% during use.

Image: The Qimedo Q3 Electric Spin Scrubber showing its adjustable handle and smart display.

4. Setup Instructions

Follow these steps to assemble your electric spin scrubber:

1. Install the Brush Head: Select the desired brush head and align it with the main unit. Push firmly until it clicks into place. (To replace, pull the brush head off, do not unscrew).
2. Assemble the Extension Handle: Align the extension handle with the main scrubber unit and twist to tighten securely.
3. Install the Battery: Align the 21V battery with the battery slot on the handle and push until it locks into place.
4. Adjust Handle Length: Press and hold the switch on the telescopic pole to adjust it to your desired length.
5. Adjust Brush Head Angle: The brush head can be adjusted 45° by pressing the button near the brush head joint.

Image: Visual guide for assembling the scrubber components.

5. Operating Instructions

Using your Qimedo Q3 Electric Spin Scrubber is straightforward:

1. Power On: Long press the power button on the handle for 3 seconds to turn on the scrubber.
2. Switch Modes: Single press the power button to cycle through the three power modes: Low (800 RPM), Mid (1000 RPM), and Max (1200 RPM).
3. Smart Display: Monitor the battery percentage on the left side of the smart display and the active power mode on the right.
4. Cleaning: Apply the appropriate brush head and cleaning solution to the surface. Guide the scrubber over the area, allowing the rotating brush to do the work. For maximum power, grasp the handle firmly with both hands.
5. Power Off: Long press the power button for 3 seconds to turn off the scrubber.

Tips for Use:

• For stubborn stains, pre-soak the area with detergent for 3-5 minutes before scrubbing.
• The cleaning brush head runs in the opposite direction of the electric tile machine, providing more stability during use.

6. Maintenance

Proper maintenance ensures the longevity and performance of your scrubber:

• Cleaning the Brush Heads: The IPX7 waterproof design allows you to rinse the entire brush head under running water.
• Battery Charging: Charge the batteries fully (approximately 2.5 hours) when the smart display indicates power is below 25%.
• Storage: Use the provided Brush Head Bag to hang the scrubber in a convenient location.

Image: The scrubber being used to clean a shower, demonstrating its waterproof brush head.

7. Troubleshooting

If you encounter issues with your Qimedo Q3 Electric Spin Scrubber, try the following:

• Scrubber Not Working: If the scrubber stops working when pressure is applied, separate the battery from the scrubber, then reinstall it. Press and hold the power button for 3 seconds to restart.
• Low Power Indication: Recharge the battery promptly when the smart display shows power below 25%.

8. Specifications

9. Warranty & Support

Qimedo offers a 2-year warranty for this product. For any issues regarding the product, order, or logistics, please contact our customer service team for assistance.

Customer service is available 24 hours a day.