GOLDFAN AWS-202-7-2

GOLDFAN Side Table Set of 2 Instruction Manual

Model: AWS-202-7-2

Introduction

Thank you for choosing the GOLDFAN Side Table Set of 2. This set features a modern design with a durable tempered glass top and sturdy metal legs, ideal for various home and office settings. This manual provides essential information for safe assembly, proper use, and effective maintenance of your new side tables.

GOLDFAN Side Table in a living room setting

Image: A single GOLDFAN side table with a clear tempered glass top and gold-finished metal legs, positioned next to a sofa in a modern living room.

Safety Information

  • Always assemble the tables on a soft, clean surface to prevent scratches.
  • Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten if necessary.
  • Do not overload the table. Refer to the specifications for weight capacity.
  • Keep small parts away from children during assembly to prevent choking hazards.
  • Avoid placing hot items directly on the glass surface without a protective coaster.
  • Do not stand or sit on the table.

Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

  • Tempered Glass Tabletop (x2)
  • Metal Leg Frames (x2 sets)
  • Assembly Hardware (screws, washers, Allen wrench)
  • Instruction Manual (this document)
Diagram showing components and features of the GOLDFAN Side Table

Image: A diagram highlighting the clear tempered glass, smooth surface, durable construction, and crossed unique design of the table's legs.

Setup and Assembly

Assembly is straightforward and requires minimal tools. An Allen wrench is included in the hardware package.

  1. Unpack all components and lay them out on a soft, clean surface to prevent scratches.
  2. Identify the metal leg frames. Each table requires one set of legs.
  3. Attach the metal leg frames to the underside of the tempered glass tabletop using the provided screws and Allen wrench. Ensure the legs are oriented correctly and all screws are finger-tightened initially.
  4. Once all screws are in place, gradually tighten them securely. Do not overtighten.
  5. Carefully flip the assembled table upright.
  6. Repeat the process for the second table.

For visual reference regarding dimensions, please see the image below:

Product dimensions of the GOLDFAN Side Table

Image: A diagram illustrating the dimensions of the GOLDFAN side table: 40cm (15.7 inches) length, 40cm (15.7 inches) width, and 45cm (17.7 inches) height.

Operating and Usage

The GOLDFAN Side Table is designed for versatile use in various settings:

  • End Table: Place next to a sofa or armchair to hold drinks, books, or decorative items.
  • Nightstand: Use in a bedroom as a compact nightstand.
  • Accent Table: Position in hallways or entryways for keys, mail, or small plants.
  • Office Use: Suitable for holding small office supplies or a cup of coffee.

Ensure the table is placed on a flat, stable surface to prevent wobbling.

Maintenance

To keep your GOLDFAN Side Tables in excellent condition, follow these simple maintenance guidelines:

  • Cleaning the Glass Top: Use a soft, damp cloth with a mild glass cleaner. Avoid abrasive cleaners or scouring pads, which can scratch the tempered glass.
  • Cleaning the Metal Legs: Wipe with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals.
  • Spills: Wipe up spills immediately to prevent stains, especially on the metal parts.
  • Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
  • Placement: Avoid prolonged exposure to direct sunlight or extreme temperatures, which can affect the materials over time.

Troubleshooting

ProblemPossible CauseSolution
Table is wobbly.Uneven floor surface or loose screws.Ensure the table is on a flat surface. Check and tighten all assembly screws.
Scratches on glass top.Abrasive cleaning materials or sharp objects.Use only soft cloths and non-abrasive cleaners. Avoid dragging objects across the surface.
Difficulty during assembly.Incorrect part orientation or overtightening.Review the assembly steps carefully. Loosen screws, adjust parts, and then re-tighten. Do not force components.

Specifications

FeatureDetail
Model NumberAWS-202-7-2
BrandGOLDFAN
MaterialTempered Glass, Metal
Product Dimensions (each table)39.88 x 39.88 x 45.21 cm (15.7 x 15.7 x 17.8 inches)
Item Weight (each table)7.8 kg (17.2 lbs)
ColorGold (legs)
ShapeSquare
Assembly RequiredYes

Warranty and Support

GOLDFAN is committed to providing high-quality products. While specific warranty details are not provided in this manual, please retain your proof of purchase. For any questions, missing parts, or concerns regarding your GOLDFAN Side Table Set, please contact the retailer or manufacturer's customer support for assistance.

You can often find contact information on the product packaging or the retailer's website where you purchased the item.

Related Documents - AWS-202-7-2

Preview Mercer41 2-Tier Square Glass End Table Assembly Instructions (ggex1083, W111254287)
Concise assembly instructions for the Mercer41 2-Tier Square Tempered Glass Top End Table with Gold Stainless Steel Legs (Model ggex1083, W111254287). Includes parts list, hardware list, and step-by-step guidance.
Preview VEVOR HXZTX2X28-17.7 Table Legs Assembly Instructions and Specifications
Official assembly instructions, parameter list, and safety precautions for VEVOR HXZTX2X28-17.7 table legs. Learn how to install and use your new table legs safely.
Preview Assembly Instructions for Tribesigns 19.6" Side Table
Detailed assembly instructions and parts list for the Tribesigns 19.6" Side Table (Model No. HOGA-YC0046). Includes warm tips, hardware details, and step-by-step guidance for easy setup.
Preview Latitude Run® Modern Side Table Assembly Instructions
Official installation and assembly guide for the Latitude Run® Modern Side Table with 2 Drawers. Includes parts list and step-by-step instructions for building your end table.
Preview Tevonte 51" x 27.5" 2-Tier Glass Coffee Table Assembly Instructions - Mercer41
Step-by-step assembly guide for the Tevonte 51-inch by 27.5-inch 2-tier rectangle tempered glass coffee table with gold stainless steel legs by Mercer41. Includes parts list, hardware, and detailed instructions.
Preview Ahokua 838B 2-Tier Coffee Table Assembly Instructions
Comprehensive assembly guide for the Ahokua 838B 2-Tier Coffee Table. Includes a detailed parts list, step-by-step instructions with diagram descriptions, warranty information, and important safety notes.